I have an HP that’s not the same model but close enough. Followed the steps that applied to mine and it worked! YOU DON’T UNDERSTAND, I was so mad this expensive thing wasn’t working! Thank you so much!!!!!
This worked for me! We own an HP Smart Tank 515 and this really did the trick. We didn't use our printer for months and the black ink wouldn't come out well when we tried to print again (just very faint color). But we soaked the bottom in hot water for less than 5 minutes, and dried it well by wiping it with tissue paper and letting it rest upright over a piece of paper. Just make sure to secure the ink carriage before printing again to avoid E3 from appearing on the screen.
Cool video! Solved my problem! Ps: If you want to remove the cartridge out without open the skull of your printer, you can cut the power down, when printer moves it's cartridge to the middle by self-checking after any restart.
Hp support told me to throw out printer and buy a new one .Only problem is this is new. I followed your directions and it solved the problem. Thanks for the video
This worked for me! We own an HP Smart Tank 750 and this really did the trick, we soaked the bottom in hot water for less than 5 minutes, and dried it well by wiping it with tissue paper and letting it rest upright over a piece of paper. Just make sure to secure the ink carriage before printing again to avoid E3 from appearing on the screen.
Wow! Superb video thank you I wasn't able to use my printer for months which resulted to missing black lines. Good thing I came across this video before spending money on another cartridge. Very good and easy tutorial that works. Thank you so much!
Thanks a million!!! This actually worked! I was losing all hope that I’ll get the black ink to print properly. However, after following your tips it worked! But then I encountered a similar problem right after with the coloured cartridge so I had to soak the coloured ink in hot water as well. Now both cartridges work! Thank you 😀
yun iba palit agad yun printer head, buti pa ito as much possible kung meron pang paraan. thanks you narefresh yun memory ko old days di na kasi ako Hp printer users, kung di lang sa friend ko nag patulong...
superrrrrrrr legittttttttttt!!!!! thank you so much sir. HAHAHAHHAAH akala ko pupunta na naman ako sa service center bwesit and mahal pa naman magpa consult ng printer 800 each season..... akala ko di totoo nagrisk ako dahil nga kapos ang eabab na i2..... ang happy ko ngayon maka print na akis ng reviewer
I have few smart tankt and every time i have this same problem. Boiling water sold this problem but the best questions that's why it's hapend only with black catridz? 🤷
do you have a video on fixing HP Smart Tank... where in the problem is when you leave the printer not printing for about 5 minutes (after heating it with hot water) the Black is gone/not working again.. at the same time the Black ink is not consuming the ink inside the tank..
I am hp smart tank 500 user. My printer is not frequently used in my store for almost 2 months. The print out shows blurry lines and white lines on colored and I don't know what to do with it while the color black has white gap lines. It also has misalignment. I already tried to align and clean printhead many times but still the problem is there. I even tried to replace black printhead with the new one. But still, the problem isn't solved. Please help me with my problem.
Sharing is caring: Bought HP printer and had multiple quality issues. I regret buying HP printer. Their aftersales support is just HORRIBLE! Their customer support is very slow to respond and just gives copy and pasted answers without even reading customer's reply. For those planning to buy, do yourself a favor: buy a better quality printer. HP printer is simply NOT worth your hard-earned money.
Gudpm,Ang problem Naman sa ho 415 ko,,,black at magenta lang Ang kulay,pwd po ba yang technic nyu para magkaroon na ng blue at yellow ung print ...thnx
Hello, I have repeatedly used the clean print head utility and tried the clean smear. It did not improve the quality. The report printed stays exactly the same. The white lines on the color are in exactly the same place. The black is also the same, the missing black areas are always on the same spots. What to do hope you help me.
I have a problem with my hp printer smart tank 615, the color is changing, if I am printing color blue it will turn to pink or like a color red. What shoul I do to fix it sir,?
@@wayneslink binuksan ko may mga ink sa likod ng cartridge at sa contacts, kahit nilinisan dre parin madetect. two weeks palang cartridge, ano kaya sira nito yong cartridge lang o mismo yong board ng carrier cartridge yong busted?
Sir pano ko po kaya papaganahin yong sa long ng printer namen hp tank hindi po kase siya nadedetect ng sensor sa long size?salamat po more power sa channel
hey sir can i contact you? yung hp smart tank 615 ko ay may error sa cyan tank niya. kahit full ang cyan tank ay nadedetect na walang laman. please Sir thanks
Vi en este video una esperanza, pero luego quise sacar los cartuchos y el carro no se movió al medio, busque tutoriales de como m... mover ese p.. carro al medio y ninguno funciono. Conclusión, las impresoras te van a hacer renegar cuando las necesites. NO compres impresoras y menos a HP o Epson!!
You keep calling that a "cartridge" but those are not ink cartridges. Those are actually the print heads, which usually is soldered in other printers. This particular unit is one of HP's new marketing ploy where they will not only make you buy the ink bottles but they will also make you buy the replacement printheads when issues like this happen. Do not buy this particular model. Totally overpriced and very high maintenance costs.
It doesn't need to be exact as long as i know what im doing buddy, and it is still called cartridges in many ways , you dont call that printheads exactly if you want to buy online.
On the contrary, it is the best thing of the kind, I throw away 10 different printers, epson, canon, brothér, because when the print head dries out, it is almost difficult to clean them. 90% of the problem, is the heads drying out, because of idle contracts. And this printer, if you have to, you can buy a new head for $15. And you have a new printer for $ 15, By the way, it's not a high price compared to other heads.
You have no idea how many hours i spent watching videos and trying to fix my printer … you’re tip saved my life ❤
I have an HP that’s not the same model but close enough. Followed the steps that applied to mine and it worked! YOU DON’T UNDERSTAND, I was so mad this expensive thing wasn’t working! Thank you so much!!!!!
Works with pretty much all sponge cartridges too...
This worked for me! We own an HP Smart Tank 515 and this really did the trick. We didn't use our printer for months and the black ink wouldn't come out well when we tried to print again (just very faint color). But we soaked the bottom in hot water for less than 5 minutes, and dried it well by wiping it with tissue paper and letting it rest upright over a piece of paper. Just make sure to secure the ink carriage before printing again to avoid E3 from appearing on the screen.
Cool video! Solved my problem! Ps: If you want to remove the cartridge out without open the skull of your printer, you can cut the power down, when printer moves it's cartridge to the middle by self-checking after any restart.
this is a great tip. I don't have to tool to remove the screws.
Thank you very much.
999999⁹
Hp support told me to throw out printer and buy a new one .Only problem is this is new. I followed your directions and it solved the problem. Thanks for the video
You are more helpful than HP-Support. Your instructions saved my printer from flying out the window. We both thank you very much ❤
Thanks for the nice feedback.. glad it helps..👋
This worked for me! We own an HP Smart Tank 750 and this really did the trick, we soaked the bottom in hot water for less than 5 minutes, and dried it well by wiping it with tissue paper and letting it rest upright over a piece of paper. Just make sure to secure the ink carriage before printing again to avoid E3 from appearing on the screen.
Hours and hours of frustration solved in minutes. Thanks to you. And HP quality keeps going down!
Wow! Superb video thank you I wasn't able to use my printer for months which resulted to missing black lines. Good thing I came across this video before spending money on another cartridge. Very good and easy tutorial that works. Thank you so much!
Very nice. Your welcome
Thanks a million!!! This actually worked! I was losing all hope that I’ll get the black ink to print properly. However, after following your tips it worked! But then I encountered a similar problem right after with the coloured cartridge so I had to soak the coloured ink in hot water as well. Now both cartridges work! Thank you 😀
Thanks for the positive feedback 🙏😊
yun iba palit agad yun printer head, buti pa ito as much possible kung meron pang paraan. thanks you narefresh yun memory ko old days di na kasi ako Hp printer users, kung di lang sa friend ko nag patulong...
Guys, this is the only method that solved my problem. Great idea. King respect to creator ...
Thanks buddy 👍
superrrrrrrr legittttttttttt!!!!! thank you so much sir. HAHAHAHHAAH akala ko pupunta na naman ako sa service center bwesit and mahal pa naman magpa consult ng printer 800 each season..... akala ko di totoo nagrisk ako dahil nga kapos ang eabab na i2..... ang happy ko ngayon maka print na akis ng reviewer
Nice one ❤️
appreciate your time and work man!
hp smart tank 615 worked..
actually problem was air in the ink hoses but your tutorial is awesome!
Thanks man
This absolutely worked. I had to soak them about 3 times, but it worked.
Thanks for the tip. Done this and it worked. Salamat bro. Saved me time, effort and money.❤
Salamat sir. Nag try ako ibabad sa mainit na tubig and it works.
Yes Alhamdulillah its working..😢😢thankyou so much for dis videos
Glad it helps
worked for me! thank you SO MUCH
Excellent! Thank you. It worked so well.
Welcome and ty
Sir, ano yung na click nyo para magmove ang cartridge sa center?
Tanks!! I almost buy a new one because don't I understand why it's not printing black.
Is this applicable also if the color yellow ink isn’t functioning?
Thank you! This actually worked! ❤❤❤
Welcome po
I made as in the video, but also I had to blow in the holes for pipes to push out clogged inks
Interesting
Yehey its definitely working on my printer. Thank you 😊
What for you remoovved upper hutch? It not nessesary. All other steps good and right.
Hello sir! How can I move the print heads or the cartridges to the center. It is hard to move it from the left side
Effective bossing thankyouu🤙
Ty bossing
thank you so much...u r a great person 😘😘😘😘😘
I have few smart tankt and every time i have this same problem.
Boiling water sold this problem but the best questions that's why it's hapend only with black catridz? 🤷
Thank you so much for this ❤❤❤
Welcome po thanks for the feedback 👋
Excellent video! Thank you!
Thanks
This worked. Thank you ❤
Pls where or how can I get this cartilages both black and color to buy. I'm in Nigeria particular in FCT Abuja
totally worked for me. thankyou
Thank you so much. Its working.
how do unlock the print heads at 3:33 time?
515 same problem
do you have a video on fixing HP Smart Tank... where in the problem is when you leave the printer not printing for about 5 minutes (after heating it with hot water) the Black is gone/not working again.. at the same time the Black ink is not consuming the ink inside the tank..
Wow wow
Thank you so much
You're welcome
THank you so Much You save my money
Thank you for this
Welcome po
Thanks but when i open the lid the cartridges are not coming to the center position.
Try to power on printer when head is moving ahead unplugged cable. Now head movable 😅
@@wayneslink Thanks a lot it helped.
I am hp smart tank 500 user. My printer is not frequently used in my store for almost 2 months. The print out shows blurry lines and white lines on colored and I don't know what to do with it while the color black has white gap lines. It also has misalignment. I already tried to align and clean printhead many times but still the problem is there. I even tried to replace black printhead with the new one. But still, the problem isn't solved. Please help me with my problem.
Up! I have the same problem. Please let me know if u found a solution for this one
I have the same problem but with yellow color , should i try the same?
Of course yes
I am so greatful to you. You have made my day. I will follow your instruction and will try.
Goodafternoon po. my problem is my hp smart tank 615 it cannot print a blue ink
what should i do?
boss, ano pong screw and screw size ang gamit mo pag bukas ng cover? salamat po
Diko na matandaan boss may set kasi ako yung marami na pwdi palit palitan . Pero ganyan pwedi naman flat screw na medium basta kasya lang
D ba masira ang parang bronze sa likod ng cartridge. Nka babad kasi
thank you help my printer done working
Pano ba hihilahin pa gitna ang cartridge
Pwdi din on mo tapos hugutin mo power cord pag nasa gitna na 😂
Tanks ❤❤❤
Hindi ba masisira yung prinhead nyn sir pag ginamitan ng mainit na tubig?😊
Kunti lang hindi lalagpas haft sa cartridges. As far as my style ganyan na mga gingawa ko since before na uso pa ang mga cartridges
@@wayneslink tatagal rin ba ang printhead kung sakaling gagawin ko ang style na ginawa mo? Salamat.
No black printing how to fixed it please help me
Sharing is caring: Bought HP printer and had multiple quality issues. I regret buying HP printer. Their aftersales support is just HORRIBLE! Their customer support is very slow to respond and just gives copy and pasted answers without even reading customer's reply. For those planning to buy, do yourself a favor: buy a better quality printer. HP printer is simply NOT worth your hard-earned money.
I will never buy anything hp. So low quality
Yes
Thank you
very useful for me ,thanks...
Welcome keep updated
Sa HP 515 kaya po? Tried cleaning but still wla parin ung cyan and yellow
Pag wala talaga replacement na po
thanks! effective!
Sir wayne bakit kaya po bumabalik sa linya linya after 3days na maging ok ang print ng printer?
Gudpm,Ang problem Naman sa ho 415 ko,,,black at magenta lang Ang kulay,pwd po ba yang technic nyu para magkaroon na ng blue at yellow ung print ...thnx
Same problem. Kamusta po? Ano ginawa nyo?
@@ivydelima7752 try mo muna mag cleaning,kung wla pa Rin baka palit kana color printhead
Hello, I have repeatedly used the clean print head utility and tried the clean smear. It did not improve the quality. The report printed stays exactly the same. The white lines on the color are in exactly the same place. The black is also the same, the missing black areas are always on the same spots.
What to do hope you help me.
ano pong ginawa nyo?
I have a problem with my hp printer smart tank 615, the color is changing, if I am printing color blue it will turn to pink or like a color red. What shoul I do to fix it sir,?
Do some cleaning for 3 or more times. Make sure ink is sufficient
Sir wayne, yun gnyan nmin walang lumilitaw pg mgScan?? Ano po kaya possible problem? Thanks
Chek scanner flex cable
Sir yung samen di na nag oopen, nag paper jam lng po yon tapos ngayon ayaw na mag open. Pls help po. Thankss 🙏🙏🙏
boss ano kaya probleamkung colored ink not detected,.. noong una pinalitan ng bagong colored ilaw weeks lang not detected na naman..
posible madumi ang contact sa likod ng cartridge. or sira na
@@wayneslink binuksan ko may mga ink sa likod ng cartridge at sa contacts, kahit nilinisan dre parin madetect. two weeks palang cartridge, ano kaya sira nito yong cartridge lang o mismo yong board ng carrier cartridge yong busted?
Boss, my idea ka paano ayusin if my white lines(gaps)? Nagpalit na ako ng printer head at strip same issue pa din =(
Check or clean plastic disk sa gilid
@@wayneslink boss anong plastic disk hehe. Salamat po!
MUCHAS GRACIAS!!
500 same problem 🥺
Ink not flow in cartridge
boss kelan pwede magpalet ng printer headng smart tank 615
ilang beses ko napo nilinis ung catridge ng printer ko po , ung printout nya my stripe tas malabo
may limit po ba yung cartridge nito?? dapat ba laging bumili ng cartridge??
Yes may time na need na talaga replacement
Hi .. i did all that but still the cyan color stops printing after 25% of the paper and nothing is clogged too :(
Same
Baka meron Kang encoder strip Nyan par
Thank you!
Yung printheads/ink cartridges hindi nagmo move sa gitna. Pano kaya? Thanks.
mag xerox po kayo ng walang papel. once, na may nag appear sa na message tapos yung cartridge po nasa right, pwede niyo po siya mamove sa gitna.
paano nyo po naremove ung cartridge case? hibdi ko po kc mausug matigas po.
push down
Pwede po bang gawin yan sa printhead ng l3110?
Di ko ma suggest kasi sensitive ang head sa mga epson. Maliban kong for experimental purposes
@@wayneslink salamat po. Ano po magandang brand pang tanggal ng clogged sir sa epsonl120
Ano po value ang transistor 1 ang l3110 po
Sir pano ko po kaya papaganahin yong sa long ng printer namen hp tank hindi po kase siya nadedetect ng sensor sa long size?salamat po more power sa channel
hot water killed my cartridges. Bad idea.
there are cautions on that, but for many years i haven't killed a cartridge doing that.
sir cartridge problem ano kaya solutions?
Clean muna contact pad. Pag wala padin palit cartridge na ya
@@wayneslink nagpalit na po ako ganun pa rin po.
Thanks
Bro patulong cartridge error nag replace nako nung error black ganon parin.
useful video
Thanks sir
ty po
hey sir can i contact you? yung hp smart tank 615 ko ay may error sa cyan tank niya. kahit full ang cyan tank ay nadedetect na walang laman. please Sir thanks
Same here😔😔
thank you it really works on my printer. Please continue sharing on your expertise
Same Cyan color not printing..please help sir
Hello my printer just spit out paper without printing
Does the printer attempt to print or just passing directly?
SIR ANU PO BA ANG GAGAWIN PAG NAG ERROR CODE
Sir paano kapag walang ink po sa hose? black ink po ayaw mag print? please help po ..bago palang yung printer ko 😭
Hi po same issue po tau teh
Ano po gnawa u
OMG GUMANA SIYA!!!😭😭 akala ko bibili na ako ng bagong printer😭
Ang galing naman 🙏
Sir paano po if blue at black lang po ang nag-reprint huhu ano po need kong gain
Try muna flushing
💯💯💯💯💥❤
hindi ko po ma move sa gitna ung cartridge po
Same here po, anu po ginawa nyo?
Sir fade pa din po ang ink pagprint namin :( wala pa pong 1 month ito
I suggest pa warranty nyu
Carriage jam problem pre patulong naman
Anu prob
Super bagal ng pagpapa photo copy. Paano kaya to ma solve?
Color ink nawawala sa Amin Yung cyhan sana bumalik galit na Galit daddy ko
Lagot na. Clogged ata
Vi en este video una esperanza, pero luego quise sacar los cartuchos y el carro no se movió al medio, busque tutoriales de como m... mover ese p.. carro al medio y ninguno funciono. Conclusión, las impresoras te van a hacer renegar cuando las necesites. NO compres impresoras y menos a HP o Epson!!
Mine still doesn't work. Am about to throw our printer 🤣
You keep calling that a "cartridge" but those are not ink cartridges. Those are actually the print heads, which usually is soldered in other printers. This particular unit is one of HP's new marketing ploy where they will not only make you buy the ink bottles but they will also make you buy the replacement printheads when issues like this happen. Do not buy this particular model. Totally overpriced and very high maintenance costs.
It doesn't need to be exact as long as i know what im doing buddy, and it is still called cartridges in many ways , you dont call that printheads exactly if you want to buy online.
Wish I knew this sooner
the ink is a lot cheaper £20 for a 100ml bottle vs £20 for a 7ml cartridge
On the contrary, it is the best thing of the kind, I throw away 10 different printers, epson, canon, brothér, because when the print head dries out, it is almost difficult to clean them.
90% of the problem, is the heads drying out, because of idle contracts.
And this printer, if you have to, you can buy a new head for $15. And you have a new printer for $ 15,
By the way, it's not a high price compared to other heads.