Nice. Don't remove the indicator bulbs as this may throw an error code. Instead, cover the indicator bulbs with thin layer of silver foil; - then if you want this as a permanent feature you can very carefully use a fine dremel and take the bumper edge down slightly. Also get a spare set of led strip's in case these ever need replacing. If you don't want to do any cutting because it is a very nice car, maybe try a heat gun (not too hot) to try and make the edges malleable to help persuade a better fit. It does look very classy.
This is the coolest thing I have seen today on UA-cam I was just watching a F40 race an 458 pista and I look in suggested and see 10 dolla Toyota carolla . 😂🤣
Got it for $5 and some change from ebay with a promo code they gave me. Only worked once. I CANT WAIT. Thanks for showing me how easy it is to install I've thought about doing this for a while.
@@mturawa like 2 weeks. Lmao. The issue is that once you cut it, you have to seal it up. If you dont, water gets in and fucks it up. Thats what happened. I meant to try again, but I just didnt get around to it. Honestly, just going to buy aftermarket lights that have dtrl. It looks okay, it depends on the car. My 08 mazda 6, it looked okay. But i rather have it off imo.
Dorman quick splice are the best automotive wire connectors ever. No need to strip insulation or cut wire. Tap into existing wire by nesting existing wire in cradle area of connector, insert other wire and snap lid closed. No need to solder or tape. Connectors are small to get into tight places. Completely reversible. The connections are made by slicing blade creating minimal damage to insulation and conductors yet creates a firm grip with reliable conductivity.
It looks nice . I order some for my lexus rx 300 but I still don't know how to connect them just the blinker but wat about the parking lights or day time running lights ? U think u can help
I want to do this on a Mazda 3 2012 hatchback, however, any ideas to how would I wire a car that has lights on the boot as in when you lift the boot the lights are separated so to get the continuous water flow indicator look would I need a delay or just wire one strip to the other strip and then wire that to the indicator terminals, any help or suggestions would be greatly appreciated thanks guys and great video!!!
With those led strips If i want to connect the day time running light does it have to be from the fuse box or there is a wire i can connected to?. My car already has day time running light i just want to make look better
Great video . I’d really love to install RGB LED Car Interior Neon Strip, controlled by a phone app. We have the same car and I’d love to see how it looks and take your tips on how to install it.
Ghost Train Vlogs it’s better for it be outside as these LED strips burn out quick. I’ve had led strips inside mine and the longest they last is 9-10 months.
hi! can i seek advise from you? I did the sequential light for my Toyota CHR, right side it is all good, lights up sequential amber nicely. However, when it comes to the left side, the sequential lights is flashing white. The left LED connection is exactly the same connection as the one on the right, yellow to yellow cables. What am i missing here?
I have a Corolla 2005 and I bought the lights but the car has 3 cables, green, green with white stripe and black... how I may suppose to connect the cables? Please help me. This light are awesome
the one with the white stripes goes with the black cable and the regular green with the yellow cable, and if you want to connect the white light you need to connect the red one to the side lights. cool 👍
@@Shinegadget have you figured out which bulbs work with your car. I tried to buy some cabus error free no hyper flash LEDs and they worked on my friends BMW but not on my van. It was weird.
These brand but check the bulbs size I think high beams are 9005 and low beams are 9006 Journey, 9012 Durango. Make sure that is the right size. Auxbeam H11 LED amzn.to/2zsa1ix
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
🔥Thanks for watching! Please support the channel by Subscribing to help us get to 100K subs 🙏 tinyurl.com/lmojpn9
this has to be one the the cleanest corollas i’ve ever seen
Thanks 👍
Seriously true... It's gotta be top 3 at least
That’s a fact
Facts
But how to connect white light
25 seconds in the video and he say that is a Corolla!!! I am like... wtf?!?! That’s a Corolla? Wow speechless looks so nice.
The white blinker throws it off
I'm sure he'll get pulled over by some jackass, Amber just looks alot better and safer at night tho 👍
He can put aluminum on it to avoid that idk what he’s thinking
@@zolttech3907I’m sure he will address it in the future just not what this video was about lol.
at 2:29 you removed the white part on the end of the LED strip. Does this affect the light?
Nice. Don't remove the indicator bulbs as this may throw an error code.
Instead, cover the indicator bulbs with thin layer of silver foil; - then if you want this as a permanent feature you can very carefully use a fine dremel and take the bumper edge down slightly.
Also get a spare set of led strip's in case these ever need replacing. If you don't want to do any cutting because it is a very nice car, maybe try a heat gun (not too hot) to try and make the edges malleable to help persuade a better fit.
It does look very classy.
Holly shit that's a corolla?!!! NICE!!!
Im not onto these type of cars but yours stands out i dig it it looks sweet mad respect for your build 💪🏻💪🏻
Thanks bro 👍
This is the coolest thing I have seen today on UA-cam I was just watching a F40 race an 458 pista and I look in suggested and see 10 dolla Toyota carolla . 😂🤣
That's at least 40+ horsepower
😁 yes 👍
It sounds like a rice hater =a muscle car fanatic 🤣🤣
🤣🤣🤣🤣
Reallly nice Corolla
Got it for $5 and some change from ebay with a promo code they gave me. Only worked once. I CANT WAIT. Thanks for showing me how easy it is to install I've thought about doing this for a while.
Damn.. that's messed up
Did you install it and how long did it hold up?
@@mturawa like 2 weeks. Lmao. The issue is that once you cut it, you have to seal it up. If you dont, water gets in and fucks it up. Thats what happened. I meant to try again, but I just didnt get around to it. Honestly, just going to buy aftermarket lights that have dtrl. It looks okay, it depends on the car. My 08 mazda 6, it looked okay. But i rather have it off imo.
That Corolla looks clean af! Best corolla I’ve ever seen, keep up the good work my guy! 👏🏼🙌🏼✊🏼
Thanks 😎👍
Dorman quick splice are the best automotive wire connectors ever. No need to strip insulation or cut wire. Tap into existing wire by nesting existing wire in cradle area of connector, insert other wire and snap lid closed. No need to solder or tape. Connectors are small to get into tight places. Completely reversible. The connections are made by slicing blade creating minimal damage to insulation and conductors yet creates a firm grip with reliable conductivity.
Yes 👍
Please, if I do want the drl strip part to be lit, I connect the red wire with the blue one as well si read of the yellow with black right?
Hello
Any videos how to properly use ideal connectors than the quick stripping and taping he did in video?
Any suggestions on how to connect led strip lights on camry 17? Need help without taking off bumper .
What did you do with the red wire? Do you connect the red and yellow together if you want the white to show also?
Loving the suquentional movingment
Esntonses el alambre amarillo y negro se conectan con la direccional y ya el rojo separado conectandose con la luz ya separado.?
if i wanted the white also, what color wire would that one go too? if i want just white no signals
looks good. i would disconnect the white light and leave the sequential light do the job.
Lovely paint. Can I know what colour you call it? Or where I can get it ?
It’s a wrap. A roll of 5ft x 75 ft is needed for a full wrap
Material 3M 1080 psychedelic wrap Roll amzn.to/2GVrnq5 👍
Will this work if you attached to the battery straight?
Does it turn the headlight off when you have your blinker on? Like when I’m making a turn at night will I still be able to see?
Can u use only the led turn light and not the factory turn light????
WHOA!!! That is one SWEET Corolla bro!!! Well done man, well done!!! 👍🏼
Thanks bro 👍
Just ordered this for both my cars... think Ill be fitting them to the top of the head lamps ...
It looks nice . I order some for my lexus rx 300 but I still don't know how to connect them just the blinker but wat about the parking lights or day time running lights ? U think u can help
Where did you get the skirt package
Holy shit..this is the cleanest corolla I have ever seen
What is the blue strip on your front grill called ? Thanks
Bumper stripe on Shinegraffix.com 👍
I want to do this on a Mazda 3 2012 hatchback, however, any ideas to how would I wire a car that has lights on the boot as in when you lift the boot the lights are separated so to get the continuous water flow indicator look would I need a delay or just wire one strip to the other strip and then wire that to the indicator terminals, any help or suggestions would be greatly appreciated thanks guys and great video!!!
Looks nice. Can u install this lights in my Supra??
Never seen such a clean carolla before
Thanks bro 👍
Now change the White led to a switch back Amber/white led. That'll finish it right. All Amber for turn and white for DRL . 👍
Did you solder it to your headlights parking lights and turn signal?
Why do you have white signal lights up front? Would look better with amber.
OMG didnt even think it was Corolla before he said it. Wow sick car mod!!!
Cool thanks 👍
Is there a video for the rear led light?
Turn signal led ua-cam.com/video/_ZfjVQYTqSs/v-deo.html 👍
Hi can you directly tap the red wire to the daylight bulb without using the ACC?
Yes you can 👍
Thank you bro, sick rolla there! What's the specs of your rims? Really pops out
Nice Christmas time
Can you shave the strip to make it thinner or buy a thinner led strip?
Very nice Corolla!! Probably the best I've ever seen!
Thanks bro 👍
that's one nice looking Toyota Corolla
Thanks 👍
Hi. Which wire color goes to the turn signal? Thanks
Yellow turn signals . 💛 ....black wire ground. And red wire white light.
Will the white lights always flash or did you just modify yours to do that too?
Just wondering if you ever did cut them and if so do you have any issues?
I just moved them to the too of the headlights, still no issues. No I didn’t cut them. Cool thanks
It comes in 2 in a package right? For left and right
Yes 👍
Nice the ROLLA looks fire love your hardwork
Cool thanks 👍
What about the red wire do I have to do anything with it.
That one you can connect it to the DRL. It is for the white light. Thanks 👍
Is there a way to slow the light down. I got the same one and cut them very short that when the turn signal is on it look solid.
No, maybe if you get the shorter strips 👍
With those led strips If i want to connect the day time running light does it have to be from the fuse box or there is a wire i can connected to?. My car already has day time running light i just want to make look better
Great video . I’d really love to install RGB LED Car Interior Neon Strip, controlled by a phone app. We have the same car and I’d love to see how it looks and take your tips on how to install it.
You can open your actual headlight and put it in there and design how you want
Ghost Train Vlogs it’s better for it be outside as these LED strips burn out quick. I’ve had led strips inside mine and the longest they last is 9-10 months.
He wasn't going to do that hes to lazy. 🤣
Reece Howell he doesn’t look lazy to me.
@@BigSausage23 wow, you got the whole crowd laughing 👏
@@douglasjohnson5568 👍
Pretty cool, I think itll look better with your turn signals being orange as well, switchbacks since you like the white drl.
Rumeel12708 yeah yellow signal will look better
Can you cut them to length?
This car is beautiful inside and out!😳👍🏽😎
Thanks 😎👍
Que luces son las led blancas intermitentes???
Estas son 👍
Super bright Turn signal LED 7440 AUXBEAM 2017 Corolla SE ua-cam.com/video/01Rev63Jbs0/v-deo.html
That's probably the best looking Carolla in the WORLD!
😎 thanks 👍
hi! can i seek advise from you? I did the sequential light for my Toyota CHR, right side it is all good, lights up sequential amber nicely. However, when it comes to the left side, the sequential lights is flashing white. The left LED connection is exactly the same connection as the one on the right, yellow to yellow cables. What am i missing here?
Maybe on of the cables it the wrong color from the manufacturer. Try switching the cables 👍
That corolla is clean af but why don't you open the headlight and stick the LED in?
pimped little Toyota man. I love hearing you say Sequential hehe. Too many commercials dang.
I have a Corolla 2005 and I bought the lights but the car has 3 cables, green, green with white stripe and black... how I may suppose to connect the cables? Please help me. This light are awesome
the one with the white stripes goes with the black cable and the regular green with the yellow cable, and if you want to connect the white light you need to connect the red one to the side lights. cool 👍
@@Shinegadget intente de esa forma pero no encendió. Gracias si por tu comentario. Tu carro está de lujo con todo lo que has hecho.
You should take the bulb out so you can only have that amber light going.
Soon or later the head light would fog up rather just get a yellow light to match
@@nayelirey9698 not if you just disconnect and leave the wire hanging
Do you have a decoder on your turn signals?
I am using this LEDs ua-cam.com/video/I8CfM0kVTus/v-deo.html 👍
Shine Graffix cool thanks. Love the car man
Donde va conectado el rojo y porque tú direccional trae dos cables nomas y yo tengo el mismo carro y trae 3 cables
Coolest Corolla ever spotted
thanks 👍
Where can I get this done in houston?
Did you only put it for the turn signal? Not for the DRL?
yeah for the DRL you have to get more cable to connect them to the bottom lights. cool 👍
White blinkers?
Damn that corolla is clean🔥
It’s looks nice,I would like to do it to my Lexus,una pregunta tú si lo recomendarías que uno lo haga?muchas gracias
Idk if it will fit the Ford Fusion 2019 titanium
It’s universal, it will fit any car 👍
They are made to put on top of the headlight, in the gap between the hood.
Can you do power mods that will be cool
That’s not how you install it, you should place the strip in the gap between the bonnet and the headlight!
I have a question, do these replace your original DRL or do they work together?
They work together if you connect them too 👍
Nice vid? Did you just leave the red wires disconnected?
Yes the red is for the DRL, you can connect those if you want the drl on. Thanks 👍
Nice ride there. Are those park lights flahsing with the sequentials factory globe or after market if so what LED are you using?
Good Video - for the Price
Recomend Change the White bulb for amber
just my opinion
Yeah that’s a good option. Thanks 👍
Manual question ,those like can be on white I contact the vendor he said not connect the Amber only white that truth?
Why do you have white blinkers, are they legal? I don't think so
Yes here in Texas is fine to have white in the front 👍
Try loosening the headlight nuts, then push the bumper in to its correct position then tighten the nuts to the headlight.
Yeah That’s a good idea. Thanks 👍
Beautiful corolla
The white bulbs as the indicator over powers the yellow
I'm a year late i hope by now you learned how to break down your connectors so you don't have to splice into them....dope ride 😎👍🏼
Where did you get the emblem cover?
Have you considered changing the bulb back to yellow to match the LED strip. BTW great work, your car looks amazing.
Yes I want to test those leds that don’t need resistors. Cool thanks 👍
@@Shinegadget have you figured out which bulbs work with your car. I tried to buy some cabus error free no hyper flash LEDs and they worked on my friends BMW but not on my van. It was weird.
I love your wheels can you give me a lil info on tires nd wheels
ua-cam.com/video/4BKzTk3rghg/v-deo.html 👍
What LED headlights and Fog lights do you recommend? 2014 and 2017 Durango and Journey.
These brand but check the bulbs size I think high beams are 9005 and low beams are 9006 Journey, 9012 Durango. Make sure that is the right size.
Auxbeam H11 LED amzn.to/2zsa1ix
So what's happens with the red wire? 🤔
The Corolla is looking nice
Thanks 👍
Do you know where I can buy LED Headlights for my 2018 CRV ex-l. I’m looking for both high and low beams.
In Amazon or ebay
9005 led (High Beams) amzn.to/2Q9hYTv
H11 led (Low beam/Fog light) amzn.to/2U9iWgZ
Cool 👍
How did you connect the wires man?
How many cm is that strip
Those lights still working??
What wheel brand are those on your car !?
Rotiform 👍
So where do u Connect the red wire??
You can connect it to the headlights 👍
Been watching his car mod for a min still remember when it was blue
Aluus uy..🤗
Cool thanks 👍