@@Jeroenvdb88 I used the same techniques as @invertedaviatorsrc they have good videos on you tube showing the kit you need. As for cost I guess it depends where you are in the world, here in NZ nothing is cheap!!
65 year old male. I have enjoyed flying model aircraft since the age of 12. Recently I purchased the UMX Consendo powered glider. Fantastic ship for sure! Unfortunately, I had a bit of a crash after a Dumb Thumb pushing through the back side of a rotor. ( I do know better). Ended up tearing off the wing and ripping out all the wires from the wing servos jack. I have finished repairs but for the life of me I can't find the wire configuration of the wing jack anywhere? On line? Nothing Dealer? Nothing. Horizon hobbies won't help either. I am hoping you do me a solid with a snapshot of the jack in question , showing the wire config? To be clear I'm lookin for a close image of the male/female Jack connection between the fuselage and wing servos... Cheers
The connector has 7 pins but only 4 are used. From aft to forward, the order is: 1: both brown wires 2: both white wires 3: red wire from port servo 4: green wire from starboard servo 5-7: empty I can send a photo if you message me your contact info. Good luck getting it fixed!
Best UMX for sure! I’ve FPV’ed mine and it’s a blast to fly!!!
How do you make it fpv? And how much does that cost?
@@Jeroenvdb88 I used the same techniques as @invertedaviatorsrc they have good videos on you tube showing the kit you need. As for cost I guess it depends where you are in the world, here in NZ nothing is cheap!!
65 year old male. I have enjoyed flying model aircraft since the age of 12. Recently I purchased the UMX Consendo powered glider. Fantastic ship for sure! Unfortunately, I had a bit of a crash after a Dumb Thumb pushing through the back side of a rotor. ( I do know better). Ended up tearing off the wing and ripping out all the wires from the wing servos jack. I have finished repairs but for the life of me I can't find the wire configuration of the wing jack anywhere? On line? Nothing Dealer? Nothing. Horizon hobbies won't help either. I am hoping you do me a solid with a snapshot of the jack in question , showing the wire config? To be clear I'm lookin for a close image of the male/female Jack connection between the fuselage and wing servos... Cheers
Not sure if this helps? ua-cam.com/users/shorts3sBjDi4aIb0?feature=share
The connector has 7 pins but only 4 are used. From aft to forward, the order is:
1: both brown wires
2: both white wires
3: red wire from port servo
4: green wire from starboard servo
5-7: empty
I can send a photo if you message me your contact info. Good luck getting it fixed!
I Love this plane. On my second (1 got lost in the sun) have two more in the closet. 👍🤣