How to Replace Mass Air Flow Sensor 10-14 Subaru Outback
Вставка
- Опубліковано 23 тра 2019
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/77/ab/air-flow-meter
In the video, 1A Auto shows how to remove, clean, and install a mass air flow (MAF) sensor. The video is applicable to the 10, 11, 12, 13, 14, Subaru Outback.
This process should be similar on the following vehicles:
2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback
🔧 List of tools used:
• Phillips Head Screwdriver 1aau.to/oCm/1AXAA00013
• MAF Sensor Cleaner
• Drain Pan 1aau.to/odU/1AXAA00320
Subscribe: / @1aauto
Check out our playlist:
Subaru Outback 2010-2014 4th Gen: • Subaru Outback 2010-20...
For More Info visit us at 1aau.to/h/bD2/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Excellent video. Well lit, close up, and he doesn't assume any level of knowledge. Shows and explains even the smallest detail.
+Ed Hansen Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I watch all your videos. Just a quick note. Dielectric grease does not conduct electricity. It's an insulator. Please keep the videos coming.
Seriously anytime my car starts falling apart you guys ALWAYS come in clutch
Thank you so much for this video. Saved me a lot of money and frustration at the mechanic!
Thank you for this! My shop wants to charge me $400 for this smh
+Jim Rodriguez Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Fantastic video, very well done. Well presented
Clear concise video. If there is no MIL set for MAF, are there symptoms pointing to it becoming contaminated? Like a sag or flatspot on moderate acceleration? Another question; would you recommend a cleaning only with symptoms or a MIL, or, possibly do it every 30K miles as PM? I recently bought a used 2011 subaru outback with 65K miles on it, and I will be servicing the airbox and filter so I might as well give the MAF component a rinse with CRC MAF Sensor cleaner while I am there. Thanks! -Sandy
When you said to make sure there's no weird color in the injector wiring plug-in part, what should be done if there is a copper color for one of the prongs? I replaced the MAFS but haven't started my car yet due to the coloring of the piece that gets plugged in. Please let me know what I can do!!
Would you recommend cleaning the non-removable post-filter that is in the MAF side of the airbox assembly? Possibly a light vacuum? My car is displaying a slight to moderate lack of high -rpm power and thinking it is an air flow restriction. The car came from a dusty desert area. - Sandy
Is there any sort of calibration that needs to be done after a brand new one is installed?
Is Dialectric silicone is the same as dialectric grease used on the battery terminals?
So i have an engine hiccup/jerk or jolt on my 2013 OB 3.6R ONLY in SNOW. NO FAULTS but code reader shows a spike in the MAF Rate in Lb/min. Thoughts?
Thank you!
Excellent video! Suggestions to recycle fluid?
Julie, the fluid evaporates in a matter of seconds, so unfortunately it ends up in the atmosphere. Luckily it is a very simple organic gas composed of isohexane then naphtha and unfortunately HFC 152a. At least it is NOT a chlorinated fluorocarbon. Short term studies have shown no toxic effects from HFC152a in continuous exposures up to 20K ppm in lab animals. - Sandy
I have a 2006. Just had mine replaced at PepBoys. Sat there the entire afternoon. They did need to check slow leaks on my tires but - all afternoon and $632. It was also replaced 4 years ago.😐
I’ll say that, part of the reason I didn’t do it myself was because I’m busy, wasn’t sure if it was my leaky head gasket that I’ve been driving on for at least 2 years and because I thought it was something deep in the engine, that I knew I didn’t have the expertise to reach. But, I try to be frugal. The next time, this little lady might just do it herself.
+Private Private You got this! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Didn’t have it this time, but I’ve priced a new one, as a spare. I know that your video is for a newer Subaru and mine is a 2006. Do you think it’s basically the same procedure, where it’s just as accessible?
+Private Private The basic steps in this video should be enough to do this task.
Thank you!
My 2007 subaru outback is having difficulty starting up during cold low temperatures weather. It will continue cranking but won't turn over. I have a new 640cca battery installed and still won't turn over. I know it's not the battery, alternator or starter issue, it's something else I can't figure it out. Maybe this mass air flow sensor would be the issue idk... Can you help me figure this out?
+Jeremy Cheng M. We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
If my check engine light came on and is throwing the MAF sensor code. Is there a point trying to clean it or should I just replace it?
I would think for the price of a can of MAF cleaner, and 10 minutes of time, it would be worth trying to clean it first.
If you throw a code, the sensor has likely failed. But I would first check the airbox for critters and cleanliness and It's a tough bugger to get closed properly. Check the PCV fresh air connexion on the vapour separator near the throttle body. Also, unplug and inspect the terminals and re-plug the connector on the sensor. Did you go through any deep puddles and get large amount of water in the intake recently ? Good Luck - Sandy
I've been searching and searching videos, images for the location of a Mass AIR FLOW SENSOR for a 2003 Subaru Outback with a 2.5L engine four door wagon,SOMEBODY ANYBODY WHO KNOWS where it is actually LOCATED PLEASE,PLEASE!!! 🤔 HELP ME THANKS🙏🙏🙏
you know how much subaru asks for it? 1k hahahahahaa
More like $300 which is still about 3x the street price.
💯👍
Mass airflow sensor subaru
My dealer wanted $179.00 to clean mine. What a joke!
wat if u put it bk d wrong way
The name of the video says “replace” not clean same one and out back 😤
+Tammy Albea Thanks for watching! Although we reuse the original, all of the steps we show you is everything you need to know to replace it. The only difference would be using a new one!