Very good video. But can I give you some advise. Don't powder the converter. Also you need to let the reaction sit for at least a week before extracting metals with that method. I've found that AR works the best for quicker extraction, than you can boil it up to 4 hours
Great information, Thanks, filtration was a real pain ! Just a quick reminder on AR, (In case of Rhodium metal) you won't be able to get 100 percent yield. But not very common PM
Top reactors are stainless steel pieces coated inside with Tantallum ( too expensive to make the whole reactor, but as stable as PTFE and much more resistant to high temperature
Yes impregnated ceramic matrix... Around 0.8-1 g per kg Pd 0.02-0.2 g per kg Pt And 0-0.05 g per kg Rh Is typical... Usually they only contain Pd specially in truck ones...
Mr. Picky plans I have a question. What do you do with all of the stannous tests when your done? Do you save them up and refine them when you have a lot or are they not worth it? I love this channel!! Keep up the amazing content!! Thanks
Thanks, Yes i wash them in a jar and keep them in a 1.5 liters soda bottle when i had enough i add some bleach to dissolve colloidal metals, then i add zinc to cement them all, afterwards i filter and process them. You need to forget about it for some time , just collect.
سلام بله شدنیه ترکیبات جایگزین مثل تیوسولفات و تیوره به صورت جداگانه یا میکس استفاده بشود. درحال حاضر امکان اموزش این مورد نیست. چون این محصول به صورت انحصاری خودمون داره تولید میشه....
@@PickyPlans بسیار عالی، پس یعنی همون فرمولی که تو ویدئو های گذشته داشتین فقط به جای سیانید سدیم از لینایی که فرمودی استفاده کنم؟ مقدارش چقدر باشه، همون نسبت سیانید که تو ویدئو هست برای اینم جوابگو هست؟
But how would it change steps? Is it dissolved by nitric acid or aqua regia? How should I separate it from Pt and Pd? Also is there some lead contamination? Should I use copper to precipitate PGMs and leave lead dissolved?
It would be dissolved in HCl + bleach mix to form rhodium chloride. You can't dissolve it in aqua regia. Then cement all metals with zinc and first treat with nitric acid to dissolve lead and palladium (you can precipitate it with DMG or ammonia like i did in this video) Treat remaining metals from nitric with aqua regia platinum would get dissolved and rhodium remain pure enough as sediment. Then percipitate platinum from aqua regia with some ammonium chloride.
Rhodium is applied on a large scale in automobile catalysts. Note that Rhodium reacts vigorously with alkalis, so I think what you can do is put the residue from the reaction with nitric acid in bleach, dry and calcine, to see if the pink color of Rhodium Chloride appears.
i have a simular sample but would this work for a copper instead of zinc ? question being its 50% nickel iron copper based 50% pgms :) keep up good work bro
@@PickyPlans thanks might drop you email depending on success or fail if ok as this13kg been fighting me for near a year now xD never done a mixed sample process just gold and silver refining nothing this messy :P
@PickyPlans o not to bad...thanks for reply....how come u can't just smelt the cat in that pyramid metal thing and refine that metal node that's left over..would that be quicker? Saw a guy do it but failed..
عمل رائع انا تابعت فيديوهاتك كثير جدن رائعه صديقي هل يمكن اذابه الذهب بحمض الهدروكلوريك وهيبوكلوريد صوديوم وهل يصلح بديل الماء الملكي من الكترونيات او الصخور❤❤❤
شكرا لك صديقي. إذا كنت تقصد إذابة الذهب مع هيبوكلوريت نعم ممكن... يمكنك إذابته مع حمض الهيدروكلوريك وهيبوكلوريت. نعم إنه بديل للأكوا ريجيا ولكنه ليس بنفس سرعة أكوا ريجيا
Cảm ơn bạn.vì video .chia sẽ rất bổ ích đến với chúng tôi.tôi hâm mộ bạn.video rất hay .❤❤ Xin chúc mừng kênh của bạn.sẻ được nhiều người đăng ký.ủng hộ bạn.tôi đến từ Việt Nam.
Tôi rất thích kênh của bạn.tôi đăng ký rồi.bạn là người bạn tuyệt vời.bạn chia sẻ kinh nghiệm.của bạn đến với mọi người.tôi là người Việt Nam.chúc bạn hạnh phúc.và vui vẻ
La manipulation des métaux du groupe du platine peut être très dangereuse. Vous devez d'abord savoir comment travailler avec des solutions de platine et de palladium dans de l'acide, puis vous pouvez commencer avec un petit lot et l'augmenter une fois l'expérience acquise.
A high mileage newer model would. The pgms are used up or expelled via exhaust as the car is driven. Cody's Lab did a PM recovery from road dust from a busy highway 🛣 😅 the replacement cats are also low on pgms. Ideal ones are older, low mileage, European 🇪🇺 cars. Mercedes, BMW, Volvo, etc.
Very good video. But can I give you some advise. Don't powder the converter. Also you need to let the reaction sit for at least a week before extracting metals with that method. I've found that AR works the best for quicker extraction, than you can boil it up to 4 hours
Great information, Thanks, filtration was a real pain !
Just a quick reminder on AR, (In case of Rhodium metal) you won't be able to get 100 percent yield. But not very common PM
شكرا على هذه المعلومات الرائعة
هل يوجد طرقة ترسيب القصدير والتوتياء الزنك
Super good, pls don't forget to tell you're using ammonium chloride solution to wash the filter papers
Thank you my friend, i forgot to mention ...
Thanks for a good presentation on a complex recovery process.
Thanks for watching, friend.
It would be useful to use catalytic converters as reactor.
Top reactors are stainless steel pieces coated inside with Tantallum ( too expensive to make the whole reactor, but as stable as PTFE and much more resistant to high temperature
What kind of yields should be expected? Is the ceramic matrix coated or impregnated with precious metals?
Yes impregnated ceramic matrix...
Around 0.8-1 g per kg Pd
0.02-0.2 g per kg Pt
And 0-0.05 g per kg Rh
Is typical...
Usually they only contain Pd specially in truck ones...
Good Veri nice Sar ji thankyou ji bahut acchi Jankari aapka bahut bahut dhanyvad ji aise hi Jankari dete Rahe ji aapka bahut bahut Shukriya Sar ji🎉
Excuse me Mr. Picky plans, what is the name of the process that was carried out for the extraction of Pd other than filtration?. Very good video
شكرا لك ❤❤❤❤❤
Según sé los convertidores dan en promedio cuatro kilos de paladio kilo y medio de platino y cuatrocientos gramos de rodio por tonelada..
Odlično prikazan proces 👍🏼
Hvala moj prijatelj
Looks complicated. But fun to watch.
Thanks for watching 🙏
At first place you can filter and melt all the metals mix. Could be sold the way it is
very helpful information
❤❤ thanks video của bạn rất hữu ích cho tất cả mọi người không có kiến thức nay thì mọi việc điều dễ dàng hơn 🎉🎉
Mr. Picky plans I have a question. What do you do with all of the stannous tests when your done? Do you save them up and refine them when you have a lot or are they not worth it?
I love this channel!! Keep up the amazing content!!
Thanks
Thanks,
Yes i wash them in a jar and keep them in a 1.5 liters soda bottle when i had enough i add some bleach to dissolve colloidal metals, then i add zinc to cement them all, afterwards i filter and process them.
You need to forget about it for some time , just collect.
when u say ceramic washed a few times. what do you mean? washed with what?
Washed with water or more specifically distilled water
عمل متقن وجمييل صديق هل من طريقه التحضير بودره زنك ❤❤❤❤
شكرًا! يمكنك استخدام رقائق الألومنيوم ولكن المعادن الأسمنتية تحتوي على مسحوق ناعم جدًا... أو يمكنك استخدام صفائح الزنك في بطاريات AA
excelent brooo
Thank you man🔥🌹
Gotta be clever to have even come up with this stuff
خسته نباشی، امکانش هست ی آموزش بزاری باری ساخت گلد استریپر که نیازی به سیانور سدیم نداشته باشه؟ اصلا بدون سیانور امکانش هست؟
سلام بله شدنیه ترکیبات جایگزین مثل تیوسولفات و تیوره به صورت جداگانه یا میکس استفاده بشود.
درحال حاضر امکان اموزش این مورد نیست. چون این محصول به صورت انحصاری خودمون داره تولید میشه....
@@PickyPlans بسیار عالی، پس یعنی همون فرمولی که تو ویدئو های گذشته داشتین فقط به جای سیانید سدیم از لینایی که فرمودی استفاده کنم؟
مقدارش چقدر باشه، همون نسبت سیانید که تو ویدئو هست برای اینم جوابگو هست؟
@@PickyPlans برای فروش سایت یا کانال داربن؟ کیلویی چند ؟
پایه فرمول مشابه است اما خیلی بهینه شده برای شرایط مختلف.
به صورت عمده به چند استان میفروشم فقط
ولی برای خرده فروشی میتونید به تلگرام بنده پیام بدید
@PickyPlans
Proud of you ❤
❤️🌹
Is it possible to extract rhodium?
Yes, if present, it would be dissolved by chlorine gas produced in this method.
But how would it change steps? Is it dissolved by nitric acid or aqua regia? How should I separate it from Pt and Pd? Also is there some lead contamination? Should I use copper to precipitate PGMs and leave lead dissolved?
It would be dissolved in HCl + bleach mix to form rhodium chloride. You can't dissolve it in aqua regia. Then cement all metals with zinc and first treat with nitric acid to dissolve lead and palladium (you can precipitate it with DMG or ammonia like i did in this video)
Treat remaining metals from nitric with aqua regia platinum would get dissolved and rhodium remain pure enough as sediment. Then percipitate platinum from aqua regia with some ammonium chloride.
Great workCan, you explain the reactions that occur in each step as equations?
Here's some reactions involved in this process:
Pd + Cl2 = PdCl4
NaClO + 2 HCl = NaCl + H2O + Cl2
Pt + Cl2 = PtCl2
2 Rh + 3 Cl2 = 2 RhCl3
Please what part of car do you recover this
Catalytic converters usually placed between manifold and exhaust tank .
Excellent !
Good job brother.👍⚗
Thank you so much 🙏🌹
Rhodium is applied on a large scale in automobile catalysts. Note that Rhodium reacts vigorously with alkalis, so I think what you can do is put the residue from the reaction with nitric acid in bleach, dry and calcine, to see if the pink color of Rhodium Chloride appears.
Good idea👍
Thanks man.
i have a simular sample but would this work for a copper instead of zinc ? question being its 50% nickel iron copper based 50% pgms :) keep up good work bro
Thanks,
For the composition you referred copper would be a better option but it's a bit slow
@@PickyPlans thanks might drop you email depending on success or fail if ok as this13kg been fighting me for near a year now xD never done a mixed sample process just gold and silver refining nothing this messy :P
Feel free ... mate
So u got like 75 bucks usd $ for both in 2024 how much were the chemicals to do it?
Chemicals are cheap like 3$ for 20 liters of HCl and 30$ for 20 liters of HNO3
And bleach almost costs 1.5$ for 20 liters
@PickyPlans o not to bad...thanks for reply....how come u can't just smelt the cat in that pyramid metal thing and refine that metal node that's left over..would that be quicker? Saw a guy do it but failed..
Yes that's quicker, I'll do it in the next videos, with success ;)
আমাকে বলুন প্ল্যাডিয়াম কী হাইড্রোক্লোরিক এসিডে দ্রবীভূত হয়❤❤
শুধুমাত্র প্যালাডিয়াম পাউডার হাইড্রোক্লোরিক অ্যাসিডে কিছুটা দ্রবণীয়। কিন্তু কঠিন ধাতু সহজে প্রতিক্রিয়া করবে না
which method do you like better for converters, smelting or this method?
Of course i do prefer smelting over all methods. Excellent for large batches...
Wet chemistry for sure.
عمل رائع انا تابعت فيديوهاتك كثير جدن رائعه صديقي هل يمكن اذابه الذهب بحمض الهدروكلوريك وهيبوكلوريد صوديوم وهل يصلح بديل الماء الملكي من الكترونيات او الصخور❤❤❤
شكرا لك صديقي. إذا كنت تقصد إذابة الذهب مع هيبوكلوريت نعم ممكن... يمكنك إذابته مع حمض الهيدروكلوريك وهيبوكلوريت. نعم إنه بديل للأكوا ريجيا ولكنه ليس بنفس سرعة أكوا ريجيا
Cảm ơn bạn.vì video .chia sẽ rất bổ ích đến với chúng tôi.tôi hâm mộ bạn.video rất hay .❤❤ Xin chúc mừng kênh của bạn.sẻ được nhiều người đăng ký.ủng hộ bạn.tôi đến từ Việt Nam.
Cảm ơn bạn rất nhiều
First🎉🎉🎉🎉
Puedes hacer un video precipitando rodio
es mi plan futuro, seguro
How recovery Chromium form stainless steel
Funny stuff
But I'm sure there's more than tweekers
Do you offer training ? We need just a better technic to improve our extraction method as beginners
Sure, DM me on Facebook or Instagram
@@PickyPlansHello, how can I contact you for training?
I know some tweekers that would love to know this info.
" Nuclear lighter "
Thanks master
Tôi rất thích kênh của bạn.tôi đăng ký rồi.bạn là người bạn tuyệt vời.bạn chia sẻ kinh nghiệm.của bạn đến với mọi người.tôi là người Việt Nam.chúc bạn hạnh phúc.và vui vẻ
Cảm ơn!
Muy bién.
Est-ce que quelqu’un qui ne l’a jamais fait peut trouver les produits et le faire ?
La manipulation des métaux du groupe du platine peut être très dangereuse. Vous devez d'abord savoir comment travailler avec des solutions de platine et de palladium dans de l'acide, puis vous pouvez commencer avec un petit lot et l'augmenter une fois l'expérience acquise.
She is not complet extration ,You lost much in this experiment in car catalyst îs much more at 0.7 pt and 0.9 Pd
A high mileage newer model would. The pgms are used up or expelled via exhaust as the car is driven. Cody's Lab did a PM recovery from road dust from a busy highway 🛣 😅 the replacement cats are also low on pgms. Ideal ones are older, low mileage, European 🇪🇺 cars. Mercedes, BMW, Volvo, etc.
Merhaba
Nasılsın
I. sels Catalytic. you