Impossible Dovetail Cube (Short Version)
Вставка
- Опубліковано 18 сер 2018
- Buy this cube in my online store bruns.engineer
Support me with Channel memberships / @engineerbruns
My channel ( metalworking, tips, craft, DIY and fun ) / @engineerbruns
Support this channel on Patreon / bruns
This time I has an order for a hiding place for a drive with a key for Bitcoin wallet. I wanted to make the impossible dovetail box for a long time, soI took the Clickspring project as a basis and finalized it for my needs.
Tracklist: Pride Before the Fall - Ethan Meixsell
#bruns #engineerbruns - Наука та технологія
To all those who don't know what's happening .....
Dove tail is a type of joint that's not supposed to come off easily .....
But in this video ..... It's an illusion ..... The cuts made .... Looks like dove tail joint when both pieces are together
But infact it's just sliding upon eachother....
But then again the whole purpose of dovetail is to keep things together so that's y they added magnets at the end to keep them stuck to eachother
Thats it .
Actualy looks like its the pin they made holding it togeather. Magnets keep the pin on one side or the other and a sharp rap shifts the pin from one magnet to the other. when the pin is on the deep side the cube slides freely, on the shallow side it blocks slideing. Still a very clever trick.
Dovetail joints are normally glued together anyway, and they only ever offer strength along one axis. This is a sliding dovetail joint. I think the magnets and pin are a more appropriate solution for metal than glue.
The illusion here (what makes it "impossible") is how the joints appear to go in both directions, as if the metal had been somehow squeezed together to reach that position. You can't slide it in either orthogonal direction of course, and it's hard to tell that it can slide diagonally without being able to see the inside somehow or knowing how it was made. (Or by just hitting it really hard at the right angle and breaking the pin.)
Get of your high horse...not something worth explaining
Only round stock selling in my country
You're SO smart. Thanks for the explanation. You must be the life of the party wherever you go?
Upon further evaluation, this was indeed possible
The video showing how to build the actual impossible version has an asymptote as you approach the end.
I bought new camera and new project in progress :) Thanks for your support!
Тоже самое, только из дерева, мы делали в школе, в конце 80-х вручную, плотно, без единой зазоринки. Преподаватель знал своё дело. А вы молодцы, особенно кубики в кубике понравились.
That was absolutely incredible! The math alone for making those cuts would have drove me bonkers. Good job dude!
Фреза новая так чисто бреет! Прям слюни текут ))) Андрей, спасибо за видео!
спасибо :)
пластинки Митсубиши, аналог нашего ВК-8, чем больше ими пользуюсь, тем больше они нравятся, как на резцах так и на фрезах.
Николай Галустян, так то их четверо это ещё Мастер 7-го разряда Сергей Александрович
Gena Bukin
Шутник)))
Адвокат Егоров, ага, ага, мы вас ждём на вашем канале с новыми поделками, а вы вот где значит )
вк-8 для нержавейки збс насколько я знаю
Музыка огонь! Мужики, вы молодцы! Низкий Вам поклон. Реально парни с руками!
- У вас на заводе такие производительные станки, новейшее оборудование, высокопрофессиональные рабочие... Но по итогам экскурсии мы так и не поняли, а что же всё-таки производит ваш завод?
- Ролики для UA-cam.
это мои станки в подвале моего дома, вы еще не видели как я на них крестиком вышиваю
Надеюсь, что увижу))
Станислав Костенко около 500-1000$
@@EngineerBrunS , в подвале должен винный погреб быть :) Вы нарушаете традиции и духовные скрепы.
@@user-ky8cy2vw9v так мне пить нельзя, совсем
You guys are insanely talented!
Камера куплена, новый проект уже в работе :) Спасибо за финансовую помощь!
Посмотрите видео "две новости" там рассказано почему теперь будут выходить полноценные и короткие версии видео
Kreative Truppe.
@TikTak Production
иди на токаря, больше халтур будет по токарке
@TikTak Production халтур больше на токарке, но зато фрезеровщиков мало очень
@@EngineerBrunS С меня подписка и лайк КРУТО МУЖИКИ 👏
Very clever! I really enjoy watching you create these masterpieces!
You just earned a new sub! I guess I've got some binge watching this weekend!
Great music too!
Работать с металлом под метал - это даже лучше, чем подметать под метал ;)
А ещё есть такой стиль: рвал & металл.
Металл и метал, никогда этого не понимал.
Ты под метал подметал? ;)
@@DokaShow Рвал металл и метал металл и все это под метал а потом я подметал искареженный металл что на рвал я под метал )))
)))
Beautiful piece of engineering.
Nice design. Both elegant and useful.
Lol, I don't know what I just watched or why it was recommended, but I left still knowing nothing. Good stuff thumbs up
Dove tail is a type of joint that's not supposed to come off easily .....
But in this video ..... It's an illusion ..... The cuts made .... Looks like dove tail joint when both pieces are together
But infact it's just sliding upon eachother....
But then again the whole purpose of dovetail is to keep things together so that's y they added magnets at the end to keep them stuck to eachother
That's it man
Срочно верните ласточке куб...))
skimen ruslan :) там их много
ласточка внутри?
@@user-kk5ti5om8i да
@@user-kk5ti5om8i это ласточка Шредингера
This is so satisfying to watch ❤
every time i see ur vdo,they re more and more awesome. yor re an artist and machining is your art.
wow beauriful job well done man. Just beautiful :) thank's for sharing
Amazing SoundTrack \m/
AWESOME!!!
That was wicked cool!
Nice job. That was pretty cool.
отличный саундтрек !
Nice! The common error being to assume that the shape of the inside of the structure is parallel to the outside. Very sneaky.
Excellent work enjoyed watching that👍👍
Klasse! -- Am Anfang denkt man: unmöglich,... aber die Lösung ist supercool !!!
You are the best. Nice music
UA-cam algorithm recommended me this from watching this old Tony, but this level of slav really should have come from watching life of Boris. Either way I'm pleased
This is short version of project. May be you should try to watch something like "full metal friend" project, for understanding what's going on on this channel :)
Master metal worker is a understatement. You sure do make some cool stuff. Thanks for videos and I am subscribed to channel now. Thanks from Vancouver b.c canada 🇨🇦 👍
cool,
thanks
Маэстро, вы живы! Ура!
This is so creative and clever. Im definitely making one of these tomorrow
Well. Did you make it?
Yeah, where is it?
Still waiting
loved your vid and the music keep em coming
Just superb!!!!!!!!!!!!!!!!!!!!!!!
Давай по чаще видюшек, меня завораживает Ваше творчество, успехов во всех начинаниях! Аминь
HEY ITS A NICE JOB THE MAGIC OF THE METAL BEST REGARDS
Впечатлительно!!! Сижу и думаю, как бы мне описать ощущения и выразить восторг...Спасибо, что снова дали почувствовать себя рукожопом =)))
very very smart !! you're very good at thinking in 3D , it's a pleasure, thanks a lot for your choices :)))
Прелесть а не станки👍и ребята молодцы 👍
i find the machining awesome. I have a question though that's not related to the machining, but is related to the video. why do you add a music soundtrack ? when I watch a machining video i 'd like to hear the machine sounds, it tells me alo t about speeds and feeds. just curious, awesome job on the puzzle cube.
Good work boss
Bad ass! Alterbridge instrumentals was a nice touch! 👏👏👏
Когда человек мастер своего дела.Видео СУПЕР!
Как я мог такое пропустить? 2 недели уже... Сразу лайк!
Вот да. И у меня ютуб не прокукарекал. Власти скрывают, очевидно. Мировое правительство хочет сохранить неизвестную тайну этой неведомой загадки в секрете за семью печатями.
Well done👍
Beautiful. 👏👏👏👏👏
Skynet is not dead))))
Спасибо, очень увлекательное видео и звуковое сопровождение.
I love the shop layout.
Super video, určitě se taky pokusím tu kostku vyrobit ! :)
Молодец, рукастый ты парень)
Это ручной станок
0:49 , мне понравилось как он достает деталь из-под фрезы уже со снятыми фасками))
Это штрих мастера
want one.. fantastic job
You can buy it here bruns.engineer/en/
Bro I think your videos are dope
Можно вам идею подсказать - если их сделать из алюминия и бронзы, но так чтобы не сходились при комнатной температуре, а если нагреть алюминиевую часть то сойдется, а как остынет то будет как литая )
Discribe your Job.
Shop machine operator: „I make Square stock round and Round stock square.“
:)))
This made my day, love from Australia
Very cool, like the choice of music to. 😎
Here is the English comment you are searching for...
Thanks
Hell yeah
Finaly :/
perhaps you and on Chinese you can
You just made my day.
Нужен треш. Говорят уже грибы пошли... 😃
A work of art
Schöne Arbeit!
nice
Невозможное становится возможным, если взглянуть под другим углом!
That sir is a very impressive machine u got there
Лойс не только за работу но и за музыку .
男心をくすぐる非常に素晴らしい動画だのぅ
うーん、ロシア人には似合わないと思うのは偏見か? いかにも日本ぽい
日本の会社が作ればもっと精度が上がりそうですね
Всё супер, и видео и музыка и идея и сама работа. Лайкос.
Satisfied 😍
Fantastic
*Это сто пудовый ТОП!* Крутяк!
как всегда - офигенно )
Wow unbelievable
Nice, Very nice.
Woww, quality, precision, craftsmanship.
Невозможно только невозможное, да и то возможно :))
Василий Осипов все может быть, и быть все может и лишь того неможет быть чего уж точно быть неможет ито ведь тоже может быть.
Шутки шутками, но учёные всерьёз считают, что всё, что способен вообразить наш разум, во вселенной где нибудь есть 😊. Хотя полагаю, этим они пытаются показать, насколько она большая 😊.
That was cool and all, but that song was amazing lol
Bravo!
как всегда лайк, спасибо за новые видео!
Как говорил мой дед без инструмента и вошь не убьешь а с такими инструментами да голова и руки на месте молодец!
nice job
Fantastyczne, niesamowite, coś pięknego!
3:02 справа логотип доты
Блин, магия! Залипаешь, однако!
I want one.
Very cool.
You can buy it here bruns.engineer/en/
Превосходно, не могу описать восхищение.
Нихуя не понял!, но очень интересно!!!
брунс ты профи!!!!
I myself CNC turners (Mazak200y), great idea, topp.
Music is the best! and you're pro, bro
skynet not dead.
Насколько фрез хватает? Я так понял вы брали фрезы для обработке дерева
Иван Михайлович если аккуратно работать то на долго, но сломать можно любым неосторожным движением
awesome
thats cool
Вспомнилась таможня в аэропортах (на Discovery channel), когда обыскивают подозрительное.
Вот бы они заепались её вскрывать. ))))
Изъяли бы, всего делов.
новый видос жду как день зарплаты)
I would love to have one of those
You can buy it here bruns.engineer/en/
Красота, идея отличная и музычка знакомая - у Бербраера часто слышал и очень заходит))