Garmin vivoactive3 Battery Replacement

Поділитися
Вставка
  • Опубліковано 4 тра 2021
  • Garmin vivoactive3 Battery Replacement
    Please note: This video has been created for tutorial purposes only and I will not be responsible for any damages witch may occur during this repair.
    The video will show you step by step on how we replace the battery on this device.
    If you enjoy my videos, please consider SUBSCRIBING!
    Leave a comment if you wanna say or ask something.TQ!!

КОМЕНТАРІ • 37

  • @wybrenbosma
    @wybrenbosma 2 роки тому +17

    Thanks for posting. Seeing the steps helped me replace mine.
    As a recommendation to future people that try based on this video. The heating and removing the screen took me a lot longer than this video, don’t give up if it does not work immediately for you. Also be very careful when removing the battery, specifically for disconnecting the part where the wires are connected to your garmin. I basically pulled the wires loose but a lot of plastic remained so could not connect the new battery. Had to use quite a bit of force and luck to remove the plastic that remained.

    • @fuddking
      @fuddking 2 роки тому

      I found that bit tricky I did the same as the video and used a mini flat head to pry it up

    • @tanakaobi
      @tanakaobi 2 роки тому +1

      Did yout test if it is still water resistant after the replacement?

  • @hasues
    @hasues 2 роки тому +5

    Step 1: Find a hotel or elevator with really chill music to begin disassembly.

  • @FFOGHORN
    @FFOGHORN 3 роки тому +11

    Thanks but you left out some important steps for us dummies. The round, metal shim looking thing? How you finally got the battery out? Reconnection of cables? It would help more with spoken instructions as you go.

    • @FuchsHorst
      @FuchsHorst 2 роки тому +2

      You don't even have to remove the metal shim on the back. Just heat up the front metal ring's glue to get the display out.

  • @fuddking
    @fuddking 2 роки тому +3

    Thank you for this video it's only one I could find. I did not remove the backplate. Could see no reason to. I also found the replacement battery had a longer cable than yours. Which I fixed with cutting half the label off the new battery and making a mini loop. I had to double check a few times the polarity of the battery that was hardest part for me removing the battery clip from the ribbon cable. All working fine now and glued

  • @bjornludwig7920
    @bjornludwig7920 2 роки тому

    Gute Hilfe zum selber machen . Vielen dank !!!

  • @TonyPowell_Munich
    @TonyPowell_Munich Рік тому

    Thank you!

  • @FuchsHorst
    @FuchsHorst 2 роки тому +10

    So the biggest problem is to get a good replacement battery. Looks like only one vendor is able to provide something close to the original but the battery holds only up to one day without use. So it's basically pointless to open the watch. Sad.

    • @DorelMormegil
      @DorelMormegil Рік тому +1

      do you mean those 160mah batterries on amazon and other sites?

  • @One-ZED
    @One-ZED Рік тому

    If it's an important step we'll see your head :)) no problem. keep up !

  • @tomwing9193
    @tomwing9193 3 роки тому +7

    What temperature do you need to soften the glue enough to remove the watch face ?

  • @georgelukes7417
    @georgelukes7417 Рік тому

    Nice video, very clear steps; now I can tackle this job!

  • @rebelgaming7639
    @rebelgaming7639 3 роки тому +4

    How do you go about making sure the back plate is on right

  • @Rufsam24
    @Rufsam24 2 роки тому +4

    Thanks for the video! What is that glue you are using to re-assemble everything?

  • @yagomailag
    @yagomailag Рік тому

    Después sigue siendo estanco?
    Se puede sumergir?
    Que pegamento se le pone?
    O no se le pone?

  • @TsatsikiNinja
    @TsatsikiNinja 2 роки тому +4

    Tearing out the battery with pointed metal tweezers looks very scary...

    • @DarrenGeyer
      @DarrenGeyer 2 роки тому

      What could possibly go wrong.....

  • @louisduquet4003
    @louisduquet4003 Рік тому +1

    where do you buy the battery ? any link ?

  • @albanluz7412
    @albanluz7412 2 роки тому

    which brand of battery do you use or can you give me a website to order it please?

  • @faizfakhri5997
    @faizfakhri5997 3 роки тому +2

    How good sharing beother...anyway may i know what kind of glue you use it man...?

    • @CHARLESKIN
      @CHARLESKIN  3 роки тому +4

      hey bro, it was T-7000 glue bro, can get it from shopee

  • @profesorfriki
    @profesorfriki 2 роки тому

    Cual es el pegamento?

  • @shawnknight8966
    @shawnknight8966 9 місяців тому

    doesnt show the placing of the battery. polarity? direction?

  • @DarrenGeyer
    @DarrenGeyer 2 роки тому +3

    And with this, I am geting a quote from a professional. This is not a home DIY project.

  • @guylaine2580
    @guylaine2580 Рік тому

    Pourquoi met il tant de temps 😮

  • @Shultz_86
    @Shultz_86 Рік тому

    After replacing the battery, the payment stopped working, it simply does not respond to the payment terminal... is this somehow related?
    I did everything according to the instructions

    • @oscartorresmoreno
      @oscartorresmoreno 4 місяці тому

      I`ve the same problem,
      have you fixed it? how?
      thanks

  • @gavinscottroyce
    @gavinscottroyce Рік тому

    Is it still waterproof after this

  • @larryarbol4863
    @larryarbol4863 2 роки тому +3

    You don't say where you bought the spare battery ?

    • @neverready
      @neverready 2 роки тому

      Generic li-ion cells are readily available in loads of places, craft shop, rc car/plane/boat shop, watchmakers etc

    • @FuchsHorst
      @FuchsHorst 2 роки тому

      @@neverready I tried to source parts but failed to find anything that comes close to this specific form factor and capacity. Maybe share your links?

    • @marcdxn87
      @marcdxn87 2 роки тому +1

      Device no longer waterproof if you do this repair ?

  • @chadlahue1451
    @chadlahue1451 8 місяців тому

    Get your head out of the way!

  • @Rickwallace1478
    @Rickwallace1478 2 роки тому +1

    No a good demonstration. If I could do it with music I wouldn't be looking up how to do it.