If your Garmin having charging problems and USB connection problems. Take it apart. With all circuitry removed I hooked up the charger and tested the leads inside the case. They all had proper voltage reading. Cleaned the circuit boards up reassembled and now works perfectly. I believe the screws to the circuit board loosened which allow the board to lift causing poor connection. Good luck easy fix 👌
This is a misleading video and doesn't have practical usage. Firstly, you need to explain that 2.3V is incorrect, which resulted due to duschargex externalal charger. Secondly, it is not practical to hold the connector pins for the whole duration if charging. U could have specified a connector model to fix the wires.
I was able to read 2.3 V using my regular USB charging block. The block will step down the A/C voltage from the wall/power outlet just the same as for any cord. The special Garmin connector is essentially just a hot/neutral wire pair that has the geometry to mate into the back of the watch. I agree it wouldn’t be practical to use this as an everyday charging method, but I was able to charge my battery from 5% to 40% in about 10 minutes, which is faster than if I’d driven to work (where I left my Garmin cable) to get my regular charger. Hope this helps you!
Forgot to bring my garmin charging cable, but fortunatley i brought my multimeter, probes, crocodile clips, and a fully charged USB battery.....phew
😂😊
😂
And cable stripper too. 😅 terima kasih kawan, gw nyari2 polarity nya baru ketemu di video mu
If your Garmin having charging problems and USB connection problems. Take it apart. With all circuitry removed I hooked up the charger and tested the leads inside the case. They all had proper voltage reading. Cleaned the circuit boards up reassembled and now works perfectly. I believe the screws to the circuit board loosened which allow the board to lift causing poor connection. Good luck easy fix 👌
Thank you...👌
Nice tutorial 👍
Thank you👌
Dapat juga kita belajar dari video kamu nie
Terima Kasih Cikgu 👍👌
Ini yg saya nanti2 😄👍👍👍
Terima Kasih 👌
did you try it?
Bro how can be the output voltage be 2.3v ??😖
Thanks!
Kind advise is don’t hold your cam while playing with ⚡️
Tq
Wah keren jamnta teknologi canggih
Jam biasa aja ni...hi hi
Terima Kasih 👌
Terima kasih sahabat. Info yg sangat bermanfaat. Terbaik
Terima Kasih kembali...👌
Padu bos panfai repair sendiri
Sikit sikit boleh la..😂
good sharing
Terima Kasih 👌
Done subscribe teruskan berkarya
Terima Kasih
Keren banget semaksimal n canggih
Terima Kasih 👌
Keren mas 👍👍 salam gowes salam sehat dan sukses selalu 🙏
Alhamdulillah... terima Kasih 👌
nyimak om
Terima Kasih 👌
Lose the music. Narrate instead. And, the watch has 4 contacts, but you didn't show or tell us which 2 to use.
Tq
Levatu
Hi
This is a misleading video and doesn't have practical usage.
Firstly, you need to explain that 2.3V is incorrect, which resulted due to duschargex externalal charger.
Secondly, it is not practical to hold the connector pins for the whole duration if charging. U could have specified a connector model to fix the wires.
I was able to read 2.3 V using my regular USB charging block. The block will step down the A/C voltage from the wall/power outlet just the same as for any cord. The special Garmin connector is essentially just a hot/neutral wire pair that has the geometry to mate into the back of the watch.
I agree it wouldn’t be practical to use this as an everyday charging method, but I was able to charge my battery from 5% to 40% in about 10 minutes, which is faster than if I’d driven to work (where I left my Garmin cable) to get my regular charger. Hope this helps you!
@Steve W What sort of power adapter are u referring to. Standard Usb 3 type chargers are rated for 5V DC output.
Wtf man im Better off buying a new charger
😂