How to Fix Spot Lock | Minn Kota Boat Scale
Вставка
- Опубліковано 1 жов 2024
- Is your I-Pilot Trolling Motor over correcting?
Or is it doing the opposite and not responding quick enough?
Learn how to fix this by adjusting your Boat Scale Setting.
Check out our channel for other Quick Tips, Repairs and Reviews.
Thanks for Watching!
If this video was helpful, remember to give it a like and please consider subscribing!
**New videos coming soon on other repairs, maintenance and tips**
Website: trollingmotorp...
Disclaimer:
Due to factors beyond the control of TrollingMotorParts.com,
We cannot guarantee against improper use or unauthorized modifications of this information. TrollingMotorParts.com assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. TrollingMotorParts.com recommends safe practices when working on motors, boats, wiring and or with tools seen or implied in this video. Due to factors beyond the control of TrollingMotorParts.com, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result.
All do-it-yourself projects entail some risk, it is the sole responsibility of the viewer to assume this risk.
Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not TrollingMotorParts.com.
#minnkota #ipilot #boatscale
That 2as actually freaking great info for most of us that doesn't read the entire manual. Thank you 😂
Man I can't thank you enough I'm sitting out here on the Upper Mississippi and my trolling motor was going nuts I thought I was going to go into the into the water. This was very helpful and it is much smoother now. I can't thank you enough man.
Thank you!! Mine was almost throwing me overboard. It was on +2... 😆
Super helpful. Really appreciate the up close screen view! 👍🏼🇺🇸👍🏼
Good stuff! Super helpful. Had no idea why my trolling motor would "seem to freak out" on spot lock. Now I know why.
how can i adj system if my terrova has a micro remote
I have the 24v 80lb on a Tracker 175 and I saw this and looked at my remote and it was set on +2 lmao!!! This video could have saved my life...not even kidding.
And it works to......
Why does my spot lock suddenly keep turning off? It was working fine for three hours.
Check you battery. Maybe it's almost dead.
Good day is there a way to boat scale to a older terrova 24 volt
By setting +1 or +2 will that eat alot more out of your batteries?
I have a 2016 terrova. My remote doesn't look like either of them. Can I do this and if so what button opens the setting to change it?
Good video, except I am experiencing the same problem with my 2016/17 ulterra, my remote is similar to yours but not the same button configuration ( not as many buttons ) my up and down buttons are on the side and no "home" button, can't seem to find a "system" page? Any help would be greatly appreciated ....
I have the previous remote terrova. How am I able to adjust this?
I have a previous remote as well. I cannot find any information on how to adjust it. Im guessing we cannot
@@jerrycroner9221
Previous previous terrova you do not have this feature. I called minn kota and asked. I guess the new stuff is pretty good on the old stuff is not as good as the new stuff.
Thank you very informative clip, can pre 2017 model terrovas have these offset features mate?
Last week I got my riptide BT and I link upgrade from from yall. And it was fast shipping and easy to upgrade for everything thank yall. And this weekend I went out 25 miles offshore and the spot lock worked great. The only thing I could tell differently was the trolling motor was running and spin around more. But it stayed dead on. With the regular I pilot wo/ bt and no link it didn't seem to spin around as much. I calibrated the heading sensor maybe thats normal. Thanks
esto es justo lo que necesitaba encontrar. En el modo fondeo el motor me acelera demasiado, quisiera limitar en cierta manera todas estas subidas de revoluciones y que el proceso sea un poco mas lento
This video might have saved me $2700…thank you!
My spot lock will not come on when you mash the button, any suggestions? Minn kota ultrex 80lb.
I am a new prescriber vantastic video fantastic job on the up close video explaining what you were doing on the remote control thanks
Awesome video
Hmm mine is older can't scroll up or down and no check mark
What if it won't give you an offset reading or tells you the offset is too large when you face the head forward??
This was helpful, thank you
Great tip. Just received the I-pilot upgrade for the old riptide from you guys. Great service and product. The best.
Good to know for sure!
I must have the older terrava. My remote is not like those in video.
Does minkota make a upgrade kit for the older motors? Im sure its all in the board in the head and the remote.
Running into the same issue
my Minn kota wont pair to heading sensor when i turn the heading sensor on the blue light starts flashing but when i push the pairing button it does not beep and then the flashing light on the heading sensor goes out can you help
I assume at this late date you have the problem solved. However, give Minn Kota support a call and they should be able to talk you through it all. I am thinking that first time I had to fiddled with it but finally got it to connect. Humminbird and Minn Kota support has been very helpful on various learning curve of these fancy devices, so they work for us. Good luck!
mine over corrects and slow to respond
Just what I needed. Great info. thanks.
spot lock does not work under bridges cant get the gps signals
Put it on legacy mode, that will help a bunch under bridges
Thanks, Great job
Just askin
AWESOME
Great video.. just purchased a Minn Kota ulterra on the recommendation of my local boat dealer.. but after reading many negative comments, I’m having second thoughts.. did I make a good choice?
It’s not a bad motor. I only recommend them if you actually need the automatic stow and deploy though, because that is where the majority of their issues are.
I've had mine for 3 years with absolutely no problems, except what he covered in this video. I was able to find this on my own but it was frustrating until I did.
Best thing you will ever buy
My spot lock will not work and. No one seems to be able to help?.
@@haroldcarling63 did you try calling Minn Kota? I've had really good luck with their customer service.
Thanks, Rob !
Thanks
Thank you!
Nice!
How do you stop the cord from getting tangled in spot lock?
Yeah I’m currently dealing with that Also it’s like strangled almost breaking
They need to make it better some how
I call it the python when it happens and smh 🤦🏽♂️
My motor is on a kayak. When on anchor mode it goes all the way up to 10 and starts turning all directions ?
Im having the same issue on my boat. Did you get this figured out?
@@jcwessel14 i have not ?
I was told by minn kota it could be a voltage issue or the boat scale setting needs turned down. I haven’t been able to find much online about it
@@jcwessel14 I've tried all those things and still not fixed i just don't use it
So yesterday I finally got my anchor mode to work 🙌
I have the older style tarova How could I make that work with that thank you for any information I appreciate it