How to make KEYWAY on the LATHE
Вставка
- Опубліковано 29 вер 2024
- As some of you may know I have milling machine (in fact this is a big drill press which resembles a milling machine...) ,but unfortunately it doesn't have automatic feed. Milling keyway with my drilling/milling machine is very difficult, that's why I decided to make this tools.
There are the links to videos below which were very helpful.
• Keying a shaft with a ...
• keyway jig for lathe.wmv
• Quick and easy shaft k...
Some tools I use in this video:
Self made:
Belt grinder 2x48 - • DIY Belt Grinder 2x48"...
Vise - • Super Strong Hydraulic...
Drill press STAND with COOLANT SYSTEM - • Drill press STAND with...
and
Welder IDEAL Tecnomig 200GD
LATHE Cormak 330x770
Evolution RAGE 4
--------------------------------------------------------------------------
Videos that you may like:
• Making MOTORIZED Plasm... - MOTORIZED Plasma Cutting Track
• Making simple Power Fi... - Simple Power File DIY
• Chain Saw HACK 7 - Dri... - Chain Saw HACK 7 - Drill Attachment
--------------------------------------------------------------------------
Social media:
FB: Made in Poland
Insta: made_inpoland
--------------------------------------------------------------------------
Music by UA-cam library :
Never Sleep
Cold Rise
--------------------------------------------------------------------------
That's close enough for horse shoes and hand grenades !!! Excellent job. I watched this video enough times to make my own. Works excellent.
Pure genius...and versatility with the tools available.
Cheers!
Well done Mate! ... I have great respect for ingenuity ... and you've got plenty. You're a clever lot you Poles.
Greetings from Australia.
Liczba mnoga dla "man" brzmi "men" :)
Oby tak dalej! Inspirujesz ludzi!!! Pozdrowienia z Warszawy.
Awesome idea man
Just a couple of points that are worth watching out for.
New endmills are ground to an exact nominal diameter and most three jaw chucks rarely run exactly true which means that the finished keyway will end up slightly over width. Use a two fluted slot drill instead as it's manufactured to a couple of thou less than it's stated nominal diameter and is also the correct cutter to use for cutting keyways.
Also if you grip the hardened shank of a milling cutter between hardened chuck jaws, it's likely to slip and work it's way back into or even out of the chuck. I find that using a bit of thin wall aluminum tube over the shank of the cutter prevents this.
Love your idea for holding the workpiece though.
Did you notice that his key fit snug as fuck?
@@johnfritzel9833Not only does he know which corners to cut, but also how to do it without sacrificing functionality.
As always, thank you from the 🇺🇸
Cool! Greatings from Brazil!
Thanks for sharing your idea, i related this kind of technics, soppurt machine world from Philippines may God guide us
Mais rápido do que na plania essa chaveta Belo trabalho
You are a brilliant man! Well thought out and built. Top job mate. Thanks for your vid.
Nice to see improvements since I made mine back in 08 good show
Pomysł świetny, ale przy obróbce zauważyłem błąd w sztuce. Frezem nie powinno zaglebiac się pionowo w materiał jeżeli wykonujesz rowek otwarty powinieneś zacząć od drugiej strony, zjechać poza materiałem na głębokość i dopiero zacząć fezowac, przedłuży to zdecydowanie żywotność narzędzia. Pozdrawiam 😉
Doskonale, Excellent 👌.
A real machinist
AWESOME idea Darek!!! As always, Too Kool my friend!!! 👍👍
Nice idea made through Lathe m/c. Instead use milling m/c or Shaping .
Original key way suppose to go like this without make relief hole.
Milling m/c suppose to End mill cutter.But this method removed Tool post made some fabrication by clamp system to hold the Shaft.
Good finishing key way with tight key fitted.
By the two men, nie ma czegoś takiego jak mans.
L. poj - man
L. mnoga - men
Tylko chciałem naprostować, nie czepiam się, a build świetny jak zawsze :)
Superb job like always, no sztos co tu dużo mówić ;)
Быстро чётко.предмет для размышления.
Brilliant idea mate. Might make something like this myself!
Its not perfect, but its truly awesome.
Ładnie wykonane 😉
Amazing work very nice 👌
У каждого токаря должен быть друг фрезеровщик !
И сварщик
szacunek za robotę leci łapka.
عمل ممتاز جدا جدا ! اشكرك .
ولله العظيم علينه احنه العرب ننشر اكل ومندي واحد ياكل خمس دجاجات ولله عيب انشر هاذا العمل الهندسي الذي يستاهل النشر
Co Polskie to jednak polskie, zastanawiało mnie jak wykonać taki klin na wał silnika, dla napędu paskiem. Dziękuję :)
I really liked the solution
Great machining and inspirational!
But hate the music and would prefer just machining sounds.
Thumb up!
Really clever!
Amazing idea
Keren banget...👍👍👍
I love your channel. You're so inventive in the shop. I subscribed. Keep the awesome vids coming!
Que Deus abençoe sua inteligencia amigo
Superb !
Great
🔨🔨👌👌👌👌👍👍👍🔩🔩🔩🔧🔧. Saludos.
Top brasil🇧🇷🇮🇹
Nice...
Tu est chef .
you're a genious! great tip! thanks!
Nice my fevert job
Wonderful
Nice
The best
Good
super
Thanks, very helpfull
Nice!!!!
Sure beats having to have a mill .. I think I'm going to build one for my projects ...
This item iam sailing whear is the shop
u r fire bro👌
Jakiej tarczy używasz do swojej przecinarki? To jest specjalna do metalu czy do aluminium?
Be easier and quicker to do it on a milling machine 😃
Yes 👍 this is nice method but long processing..
wow
Nice job! But you always test fit before you take your work piece off the machine!
Siemka, jak sprawuje sie ta piła evolution ? I jak ta tarcza sie zachowuje ? Fajny projekt :)
I think I'll be a little bit nervous about welding on I lathe Not very kind to the bearings
woowww
Excelente qual e a marca e modelo desse torno
Legal
와 생각도 못했다
We will do also four jaw
Is that AWFUL muic really necessary ?
And properly explain all slots cut
How to make fixed metal with key I need answer just I will like it
Putting that in a mill seems like it would’ve been a lot easier.
If you have a mill
Super Darek, bardzo pomysłowe i solidnie zrobione. Pozdrawiam
Good
to all people crying because of accuracy: the guy is building electronic wheelchairs, not a lamborghini
If it’s stupid and it works, it’s not stupid
what kind of accuracy are you talking about,? looks ok for the prupose...
You'd think the electronic wheelchair would be more important than a Lamborghini 🤷🏻♂️
@@bluddywulf6796 but tolerances dont need to be that close if you just build something thats a little faster than walking speed
Don't be an idiot, elderly are allot more important than any Lamborghini. And when has any machinest not kept tolerances at least at a couple thousand's of an inch besides?
Muito bom amigo!!!Excelente projeto e trabalho amigo!!!Like!!!Saudações do Brasil!!!
Much better than drilling a hole and hacking it out with a cross cut chisel, lol.
To uczucie kiedy oglądasz film i do ostatnich sekund zastanawiasz się co to kurwa jest.
A może się języków uczyć zamiast tracić czas na YT?
W tytule jak byk jest napisane jak wykonać rowek wpustowy na tokarce, co zresztą na filmie jest dokładnie pokazane.
Co samego do sposobu to nie działa gdy mamy spory, stopniowany wałek.
Kumpel jeśli nie potrafisz wywnioskować co się dzieję to znaczy, że jeszcze dużo życia przed tobą :)
@Marcin Nao. +1
@@marcinnao.314 Być może bez tego filmu nigdy nie dowiedział by się co to keyway a dokładniej key seat bo to właśnie zostało wykonane nie każdemu potrzebny techniczny język.
jak nie wiadomo co to KEYWAY to zawsze wygłoglować można :)
kurrrr .... oglądając film żałuje że nie kupiłem 3 lata temu tokarki :S
Fasza!!!....
Awesome i love this guy ,great ingenuity, exactly what is needed in engineering
Your work is very nice but not useful for heavy duty
Good
leaving comment before this video blowing up and getting like ridiculous amount of views
also great video
Isn't better to move in the stock rather than plunging in and milling out?
As long as it's a center cut endmill, it can do plunge cuts. Most 4 flutes come as center cut now. It used to be only 2 and 3 flute that came this way. It's usually dependant on the job, as well material being machined, as to wether you plunge or start away from the work and go in. Personally I cut keyways on a mill, but this is a great way to do the job with what you have. The only thing I would have done differently is I would have had my RPM up higher (around 700-900 RPM) for that size endmill.
Complimenti x la costruzione di questo accessorio x la torretta; le idee vengono quando ci sono i problemi di lavorazione.
nice idea.
is 300rpm not a bit too slow? i would guessed 600-900 for the 10mm hss endmill.
👍👍👍
good job, Thanks for sharing and best regards from the GUADELOUPE (FWI)
Excellent inventive and great fabrication skills.
I too used my lathe as a mill, prior to finally purchasing one.
Thanks for sharing and best regards from the UK.
Loud music and no explanation (over engineered)
It’s good practice to use an undersized cutter to remove most of the material then finish with a full size cutter with no runout.
Żeby nie było pytań co to za przecinarka, jest wyraźnie opisana markerem :D
U got the real workman skills buddy...hats off😍🙏🙏
Гениально, млять!!! фрезеры шпон пазы перестанут делать
what is your gas mixture and mig wire and also the mig welding machine that you are using for this sir? and the adjustments for gas and wire speed? .thanks in advance . since i am planing to setup a mig welder
I tried to work out how you could do it with a lathe before i watched it, what an ingenious solution! 👍
All that work to hold the part , could've just used a mill....and anyone who says "well, what if you aint got a mill" then I say between, your welding machine, chop saw, angle iron and brackets and ALL the other tools....you spent your money wrong.
Please can you tell me the name of the tool made by you used to make keyway on lathe machine
I want to do a project report on that topic
Or do you have any report on it 🤔🤔
16 Therefore, from now on, we regard no one according to the flesh. Even though we have known Christ according to the flesh, yet now we know Him thus no longer. 17 Therefore, if anyone is in Christ, he is a new creation; old things have passed away; behold, all things have become new. 18 Now all things are of God, who has reconciled us to Himself through Jesus Christ, and has given us the ministry of reconciliation, 19 that is, that God was in Christ reconciling the world to Himself, not imputing their trespasses to them, and has committed to us the word of reconciliation.
20 Now then, we are ambassadors for Christ, as though God were pleading through us: we implore you on Christ’s behalf, be reconciled to God. 21 For He made Him who knew no sin to be sin for us, that we might become the righteousness of God in Him. 2 Corinthians 5:14-21
Possuir equipamentos e ter criatividade é muito prazeroso.
Love the content, not so much the new dance party
Thumbs up always
Cheers
I'm confused. Why he didn't just cut the keyway on the mill where he made his fixture?
We never saw a mill in the video.
Guessing what we did see, was a drill press... (not trying to be a smart-ass)
May his milling is not working, but work is urgent.
I like your channel and the things you are making. Some good ideas. I made Gears on lathe as shon in video #26.
Keep it up.