Lenovo Ideapad 3 Touchpad Not Working Fix - Ideapad Slim 3 FN Drivers

Поділитися
Вставка
  • Опубліковано 10 лис 2024

КОМЕНТАРІ • 14

  • @dazzp2
    @dazzp2 Рік тому +2

    Gotta add,if you've no Keyboard access because of ANY TOUCHPAD issue , Try HARD RESTART 1ST,,,,,unplug all your peripherals , and ESP POWER CABLE , SHUT DOWN if possible normally , then Hold your finger on the start button exactly 60 seconds , don't take it off , then power up ,,. 9/10, personally I've always in a way Discharged the CMOS / slight jolt to the Bios and it's done ,the amount of crooks out there who'd charge 50 Quid for a Primary School bullet point IT class fix is crazy ,,,great video m8

    • @urirknme4172
      @urirknme4172 Рік тому

      Im going to give it a try
      I've tried everything else to get the touchpad working again after windows 11

  • @marekkowalski3814
    @marekkowalski3814 2 роки тому +1

    I have a question? I have a problem with the Lenovo IdeaPad Gaming 3 15ARH05 laptop
    After starting the laptop, a white LED lights up to indicate that the laptop is working.
    The fans turn on for a moment, and after a while the fans turn off.
    The laptop screen is black.
    What do you think might be damaged in the laptop?

    • @nori6237
      @nori6237 Рік тому +1

      Usually it's RAM if the power LED on but only black screen.
      Try reseating the RAM first or if you're on dual channel, then try plug one stick at each slots.
      Also don't forget to reset the CMOS battery.

    • @marekkowalski3814
      @marekkowalski3814 Рік тому

      @@nori6237 When I turn on the laptop, the fan turns on for a while then turns off

    • @nori6237
      @nori6237 Рік тому

      @@marekkowalski3814
      Only fan turns off or the laptop rebooting?
      If it's only fan that turn off, then you need to reset the CMOS battery.
      Remember use only one SODIMM RAM first, unplug CMOS battery, unplug the battery, press power button for like 2 minutes.
      See if the laptop enter the phase of constant rebooting or not, if it's rebooting, wait for several minutes to see if it could boot to windows or not.
      If it didn't rebooting (fans turn on then only fans turn off yet blank screen and the power led still on), then try reseat your SODIMM to the other slot first.
      If it's still the same then do CMOS reset again, after that turn on the laptop.
      In case it's still on blank screen at other slot, try it with your second SODIMM RAM.
      That's what happened at my unit when i tried to upgrade it with different timings RAM.

    • @dazzp2
      @dazzp2 Рік тому

      @@marekkowalski3814 that's your Bios not set right , check your clock speed

    • @dazzp2
      @dazzp2 Рік тому

      Arrr,if it's onboard soldered Ram try your Quick keys , WINDOWS KEY + Q you may have Hot Keys and not realised , I know on the Ideapad i3 15.6' it always boots sadly in the mode you set it to unless you Adjust it in the Firmware

  • @MrAkrobertboss
    @MrAkrobertboss 4 місяці тому

    Thank You it works

  • @TheLivingTribunal
    @TheLivingTribunal 10 місяців тому

    no working man ...