I am amazed by your skill, imagination and the way you can see how so many things in your minds eye. Each video shows off your skills to the max. Very enjoyable.
I'm a canadian watching from the philippines i used to travels through your neck of the country all the time i drove truck for 35 years in canada in america tired in the philippines
Brent I enjoy watching your work I’ve learned so much and your laughing all the time gives me peace of mind I’m a tiny bit jealous over YOUR WISDOM. Your choice of words is SMART AND FUNNY. So Thank You Sir for the content most pleasurable!!!!
Every time I watch one of these vids I feel like I'm learning something even though this stuff is way over my head. Having said that, nobody has a sound track as cool as the music I hear on these vids. I dig it.
The square body gm trucks have always been my favorite, especially the 73-79 square nose! Now with a LS set up and a 5 spds that is ideal. And this 74 c10 is in pristine condition. Perfect build! Im very happy youre doing this ❤
Lol…. Grey dash, bright blue floor paint, dark blue carpet, red seat, grey floor mats. Not sure why I find that amusing😂awesome video 🤟I’m learning a lot about LS swaps. I’ve got an IROC that I bought, with LS sitting in it. I’ve got to hook everything up, and your videos are teaching me a lot!
Clutch'y sitchyation, plazma motor'd mounts, clutch'n da manual tranny, stuff'n da motor n tranny in, headers clearanc'd steer'n too, rad's plumb'd n stuff's mock'd up, da boyz visit'd.
I enjoy this and pickup a thing or two by watching or off the comments. I am by no means at this level, but it sure helps on the few project I do. I think he is going to be happy with this truck.
I'm amazed by how effortless you make each stage of a build look . Thank you so much for having us all in the shop with you , the peace and quiet must help you to accomplish the wonders that make you such a success at your level as a mechanic. Once again thank you , God Bless you and Yours , Stuart in Ontario ..
Almost the same type set up I put in my 49, but auto trans, gonna work great! Sometimes just a drink cup over the tail shaft will work, until you knock it off at least.
Looking good and fits great . I don't like to complain but for some reason you music , which I did like , was a lot louder than the vocal . So I was constantly turning the volume up and down .First time that's happen on here . I did switch over to head phones part way though and that helped because I could just keep my thumb on the volume control .
Wow Brent you make it look easy, i'm sure the man you are doing this for is going to love driving it.. Can't wait to see how "EASY" you do the wiring thing.
Anyone else having problem with the sound? Had the same with the shop pad update. All the narration is mute, not the music. Still as always fun to watch. 😊
great progress Brent, it was kind of easy peasy for you up to now , everything falling in to place ... but like you said "future me problems " will be ...😁👍✔🍺
That’s all working very, very well. We’ve owned three square bodies - one 350/cam and 2 diesels, so your latest project is quite nostalgic. Looking forward to updates on the new shop project!
Brent you got a lot done. Even got Austin involved. Loved the video. Definitely back on top of things. Looking forward to your work always. Thanks for sharing 💯👍👊❤️
Great video, love the install on a square body. I wish I had the LS knowledge like you do, it looks so easy when your doing it. Thanks for the latest video, keep up the great work.
Hope to see how you install the line lock,and how its used. Im not familiar with them at all. Been a mech all my life but never played much with the zoomie stuff. Oven cleaner, yup. Will discolour aluminnium though. Pine-sol works pretty good too.
This is going to be quite the nice ride...this one has seemed really easy with the rad and all just working. As always I will be waiting on the next one...later
Excellent video Brent :) , Pablo :) , Buddy Supervisor Dogs 🐕 Lol and yes got lots accomplished today on that 1974 truck with 5.3 V8 and 5 speed Manual transmission! Have ideas for Brent so transmissions in Automatic and Manual leak would could use one each on old not used for final in tail stock take out when don't hang wall label one for Automatic and Manual ones grap when need and when done hang up again till needs them ! That what do at my work ones For old and new transmissions and labels on wall so grab say need Automatic Turbo 700SR 4speed Overdrive , Turbo 350 or 400 3 speed Automatic, 200 Power Glide , plus labels say for GM , Ford, Dodge and many others makes plus models ! Hope that help out for future try to sometimes and save time!
Reckon to date that 74 squarebody LS swap is most easiest or so you make it seem Grant ...but good on you man nothing gets the better of you and LS swaps
I use the same headers but never use the gaskets they send. Always reuse the factory ones. Sometimes I have to resurface the flanges but good results for the money.
Your knowledge is amazing. Please though, never use oven cleaner on an engine. I'm not a mechanic, but many will say that oven cleaner on an engine may damage seals and gaskets. Please don't.
I thought Canada was miles instead of kilometers. Miles here in UK and kilometers in Europe, but if you forget while in Europe and think they are years ahead or stupid when you see the speed limit is 50 in built up areas, like I did in spain and france, I didnt remember it was kilometers and thought, 50 mph was good for built up areas. lol. I saw the speed limits and done them in mph instead of kph. Even on motorways. Thinking they were ahead of time at 100 on a motorway, instead of 70mph back home. lol Luckily enough, I was never caught for speeding.
I am amazed by your skill, imagination and the way you can see how so many things in your minds eye. Each video shows off your skills to the max. Very enjoyable.
Hell I panic when my battery is flat lol.
On a side note happy Labor Day to all.
Brent, you keep building back better one step at a time! The new shop, retooling, projects etc. It's truly impressive and fun to watch! Congrats!
Brent " wiring won't be a problem" normal guy AAAAHHHH lol ! You're flying through this ! Godspeed!
WoW ! I never realized you had Chapters if one opens the description completely. How Kool.
Dude built a car on a scissor lift! Frickin' animal!
Brent is always happy on camera 🎥!!!!!!!!
I'm a canadian watching from the philippines i used to travels through your neck of the country all the time i drove truck for 35 years in canada in america tired in the philippines
Brent I enjoy watching your work I’ve learned so much and your laughing all the time gives me peace of mind I’m a tiny bit jealous over YOUR WISDOM. Your choice of words is SMART AND FUNNY. So Thank You Sir for the content most pleasurable!!!!
Love it when you do your psycho laugh. So nice to see a clean engine.👍🏻👍🏻👍🏻👍🏻👍🏻👏🏻👏🏻👏🏻👏🏻👏🏻⭐️⭐️⭐️⭐️⭐️✅✅✅✅✅
Every time I watch one of these vids I feel like I'm learning something even though this stuff is way over my head. Having said that, nobody has a sound track as cool as the music
I hear on these vids. I dig it.
You make hard work look easy, I find the one man show always works better!
Shouldn't be a problem famous last words.😊
Brent for the win!!!
That thing will be running in no time! Thanks for the Pablo footage!
The 74 Chevy Truck with the 5.3LS motor and 5 Speed Trans will be a Cool Ride when finished. Cool Pablo taken a boot with u at the end..
I love this build. This is what's hot right now the owner of the truck should give you extra when he drives it. Beautiful truck.
It's crazy how much stuff just worked from one generation on another.
Nice video Brent!.your grandson is very lucky to have you teaching him about cars and trucks
We all know its not but dam Brent you make this look so easy . Good to see the boy back helping out ,
The square body gm trucks have always been my favorite, especially the 73-79 square nose! Now with a LS set up and a 5 spds that is ideal.
And this 74 c10 is in pristine condition.
Perfect build!
Im very happy youre doing this ❤
An all the room under the hood a fella can ask for.
You are one happy dude today. Nice to see it.
Lol…. Grey dash, bright blue floor paint, dark blue carpet, red seat, grey floor mats. Not sure why I find that amusing😂awesome video 🤟I’m learning a lot about LS swaps. I’ve got an IROC that I bought, with LS sitting in it. I’ve got to hook everything up, and your videos are teaching me a lot!
I’m just loving how you laugh it up and then if its a little bunk you laugh it out must be cause you’re doing what you’re loving to do 🎉😅
For a small shop, you can accomplish a lot , nice job 👍.
Clutch'y sitchyation, plazma motor'd mounts, clutch'n da manual tranny, stuff'n da motor n tranny in, headers clearanc'd steer'n too, rad's plumb'd n stuff's mock'd up, da boyz visit'd.
Good one Brent....good to see Buddy & Pablo keeping an eye on you and this project...music was great..
Take care & be safe..👍😎
Man you make it look easy!! I know it’s not as I have done several myself!! Nice work Brent!!
Awesome job Brent. It's nice to see your grandson working with you.
I liked the let's get going eyes and expression. 4:56 to 4:57 ish
I’ve always been able to visualize anything and draw it out and make it seem easy and happen we must have a pictorial memory 😂
I enjoy this and pickup a thing or two by watching or off the comments. I am by no means at this level, but it sure helps on the few project I do. I think he is going to be happy with this truck.
That garage kept truck is In great shape music to the ears when doors closes lol
When God made Multitasking he broke the mold when you signed up !
LOVE YOUR SHOW !!!
You are reliably inspired and inspirational.
Minty !
Thank You for sharing your video, and letting us hang out .
Later ...
Thank youb Brent for Another interesting update video. Your laugh is telling me that things are golden with you. Take care.
You got quite a bit done this time. Your knowledge and skills are amazing.
Brent I am very glad to see that you are feeling much better. You are definitely back on your game. That's some jive 40s music.👍
I'm amazed by how effortless you make each stage of a build look . Thank you so much for having us all in the shop with you , the peace and quiet must help you to accomplish the wonders that make you such a success at your level as a mechanic. Once again thank you , God Bless you and Yours , Stuart in Ontario ..
I love to see the grand kids helping grandpa and learning at the same time....
Oven cleaner does an amazing job. I found no name brand works even better than the brand name at less than half the price.
Super how well things are fitting. Reminds me of "the old farm truck" from that show where they drag all the time...
It was good to see them young hands in there with the ole G paw. Hi Ester. Be well.
Every video has some thing in it that will help me out with my projects.
Almost the same type set up I put in my 49, but auto trans, gonna work great!
Sometimes just a drink cup over the tail shaft will work, until you knock it off at least.
this build is really interesting and informative, thank you for sharing Brent and explaining the LS swap process ...👍🍺🍺
Looking good and fits great . I don't like to complain but for some reason you music , which I did like , was a lot louder than the vocal . So I was constantly turning the volume up and down .First time that's happen on here . I did switch over to head phones part way though and that helped because I could just keep my thumb on the volume control .
Brent you make everything look so easy great job that truck is goin to be one of your best keep on keeping on
Love watching you do your LS conv, it's neat & stock looking!! 👍 wish I could do 1, ,lmfao.
Wow Brent you make it look easy, i'm sure the man you are doing this for is going to love driving it.. Can't wait to see how "EASY" you do the wiring thing.
MamaCard here, watching faithfully
I also love that you can do or draft up anything that works well ❤
I think it’s good you’re passing on the knowledge
Brent, the most upbeat guy on the TUBE!
Anyone else having problem with the sound? Had the same with the shop pad update. All the narration is mute, not the music. Still as always fun to watch. 😊
And 12 hours later it seems to be working. 🤷♂️
Coming along well Brent Nice job on the mounts
Been waitin for a straight up clean clean square body ls swap, thanks so much. Cheers from The Pine Tree State
great progress Brent, it was kind of easy peasy for you up to now , everything falling in to place ... but like you said "future me problems " will be ...😁👍✔🍺
Awesome project. You make it look too easy. Can’t wait to see her running and driving. Great video thanks for sharing
That truck must have been really lowered at some point. Don’t know why else those caps would be on the inner fenders. Gonna be a clean installation!
That’s all working very, very well. We’ve owned three square bodies - one 350/cam and 2 diesels, so your latest project is quite nostalgic.
Looking forward to updates on the new shop project!
Fantastic how you make a build come together. Wonder if you lay awake thinking about your builds. Great work.👍👍
Another outstanding job Brent!
4 on the floor and a fifth under the seat from back in the day.😊
Brent you got a lot done. Even got Austin involved. Loved the video. Definitely back on top of things. Looking forward to your work always. Thanks for sharing 💯👍👊❤️
That was a great watching video and you do make it look so easy. thanks again Brent. God bless
5:17 A little tip.
If you loosen the screw and lift the boom up by hand and then tighten the screw again, you don't need to pump as many times. 😉
That's the way I do it but I don't loosen the screw so the next time I will try it that way .
Great video, love the install on a square body. I wish I had the LS knowledge like you do, it looks so easy when your doing it. Thanks for the latest video, keep up the great work.
Awesome Brent - you are a trooper! Brilliant progress.
Love a square body thats a perfect fit in the engine bay looks tidy
Another great educational video from the best on UA-cam. Can't wait till you get your new shop up and running, take care.
you just are like that energizer bunny rabbit !
I been waiting for your videos today Brent
Hope to see how you install the line lock,and how its used. Im not familiar with them at all. Been a mech all my life but never played much with the zoomie stuff.
Oven cleaner, yup. Will discolour aluminnium though.
Pine-sol works pretty good too.
Like 130. All good !
This Truck is Super Clean🦾🔥🔥🔥
Party on dude😊
Universal Joint Rear Moog 372C is the one I've had to use many times. Got 2 of um in my 56 chev pickup.
This is going to be quite the nice ride...this one has seemed really easy with the rad and all just working. As always I will be waiting on the next one...later
Always watching
Excellent video Brent :) , Pablo :) , Buddy Supervisor Dogs 🐕 Lol and yes got lots accomplished today on that 1974 truck with 5.3 V8 and 5 speed Manual transmission! Have ideas for Brent so transmissions in Automatic and Manual leak would could use one each on old not used for final in tail stock take out when don't hang wall label one for Automatic and Manual ones grap when need and when done hang up again till needs them ! That what do at my work ones For old and new transmissions and labels on wall so grab say need Automatic Turbo 700SR 4speed Overdrive , Turbo 350 or 400 3 speed Automatic, 200 Power Glide , plus labels say for GM , Ford, Dodge and many others makes plus models ! Hope that help out for future try to sometimes and save time!
always enjoyable to watch and learn.
Reckon to date that 74 squarebody LS swap is most easiest or so you make it seem Grant ...but good on you man nothing gets the better of you and LS swaps
Jerry @ Ugly truck experience has some great videos on LS Squarebody swaps
There is always a way you always seem to make it look easy one problem at a time great watch 👍👋🇨🇦
Music is killer awesome
I use the same headers but never use the gaskets they send. Always reuse the factory ones. Sometimes I have to resurface the flanges but good results for the money.
A man of many talents 🎉🎉🎉🎉🎉
Your knowledge is amazing.
Please though, never use oven cleaner on an engine. I'm not a mechanic, but many will say that oven cleaner on an engine may damage seals and gaskets. Please don't.
Thanks for the video Brent. Always a treat.
Looks like it belongs in it... nice job!
Perfect co pilot
Thanks for the video. Appreciate team Halfass more than you know. Take care.
I'm sure it'll turn out groovy.
Good ideas on all counts for how you did all that .😊😊😊
The eyes has your back🤣🤣
Magic hands!!!
Another awesome video. Keep up the great work.
I thought Canada was miles instead of kilometers. Miles here in UK and kilometers in Europe, but if you forget while in Europe and think they are years ahead or stupid when you see the speed limit is 50 in built up areas, like I did in spain and france, I didnt remember it was kilometers and thought, 50 mph was good for built up areas. lol. I saw the speed limits and done them in mph instead of kph. Even on motorways. Thinking they were ahead of time at 100 on a motorway, instead of 70mph back home. lol
Luckily enough, I was never caught for speeding.