I wish I can see the actual wiring done, but overall this video gave me more of an understanding to what I need to do to wire my whips onto my Rzr turbo r 2022
Thanks for the tips! Do you think I can fit some 1” flex conduit in through the center console? So I can run multiple wires at different times to save from having to tear into it multiple times?
Here a link to the plugs I use: Lesiyou 6 Pieces Pulse Power Plug Compatible with 2018-2021 Polaris Ranger XP 1000 RZR RS1 Pro General, Bus Bar Power Harness Pigtail Connector 14 Gauge a.co/d/fIv8RRR
I don’t have a video specifically for that. What you’ll need are some of the pulse bar connectors. The pulse bar under the dash usually has dust covers on them. Remove a dust cover, plug in a pulse bar connector and then connect your wires to the wires on the connecter. There are three wires coming out of the connecter. Mine had black, red and yellow. Black is ground, red is 24hr + power, yellow is ignition power if I remember correctly. But you can verify that with a test light. From there, run your wires to the switch and then to whatever you are trying to power. Hope that helps. If not let me know and I’ll see if I can put together a video on this.
Do you have a video of how you wire into the dash? That’s where I’m confused and can’t find any videos on how to wire into the pulse system
I wish I can see the actual wiring done, but overall this video gave me more of an understanding to what I need to do to wire my whips onto my Rzr turbo r 2022
Thank you for the comment. I’ll make it a point to show more of the wiring the next time I do an install like this. I appreciate the feedback.
I just ordered a pair of 3ft elite gorillas for my ‘22 defender
Great video. I’m picking up my Pro R 4 Ultimate and you will save me some cussing and guessing. Thanks. Lol
Glad you enjoyed the video. Happy to help.
Thanks for the tips! Do you think I can fit some 1” flex conduit in through the center console? So I can run multiple wires at different times to save from having to tear into it multiple times?
Yes, I think it would be possible to install the conduit in there. It might be a little tight near the gear shift assembly though. Good idea.
Where do you buy the plugs for the bus bar?
Here a link to the plugs I use:
Lesiyou 6 Pieces Pulse Power Plug Compatible with 2018-2021 Polaris Ranger XP 1000 RZR RS1 Pro General, Bus Bar Power Harness Pigtail Connector 14 Gauge a.co/d/fIv8RRR
4ft or 5ft?
You need to zoom out more while filming
4ft. Thanks for the feedback. I’ll keep that in mind.
Do you have a video of how you wire into the dash? That’s where I’m confused and can’t find any videos on how to wire into the pulse system
I don’t have a video specifically for that. What you’ll need are some of the pulse bar connectors. The pulse bar under the dash usually has dust covers on them. Remove a dust cover, plug in a pulse bar connector and then connect your wires to the wires on the connecter. There are three wires coming out of the connecter. Mine had black, red and yellow. Black is ground, red is 24hr + power, yellow is ignition power if I remember correctly. But you can verify that with a test light. From there, run your wires to the switch and then to whatever you are trying to power. Hope that helps. If not let me know and I’ll see if I can put together a video on this.