small-engine-EFI-Kit conversion
Вставка
- Опубліковано 25 чер 2011
- Ecotrons small engine EFI conversion kit..
An 150cc bike is converted from carburated to fuel injected, with Ecotrons' EFI kit.
This EFI kit has below features:
• Electronic fuel injection (EFI)
• ECU controlled ignition system (via CDI)
• Plug-aNd-Play (PNP) with an O2 sensor
• Dual fuel maps selectable by a manual switch (Performance Switch: ECO vs. RICH Mode)
• High fuel efficiency and low carbon emissions
• Decel-fuel-cut-off
• On board self-diagnosis with a MIL lamp
• Performance tuning for advanced users
• On-the-fly calibration
Parts:
1.ECU
2.Harness (including the connectors)
3.Throttle Body and Intake manifold Assembly
• 24mm/28mm Throttle body (including TPS sensor)
• Intake manifold (GY6 only)
• Fuel injector (38/60/80/120/200g/min)
4.Fuel pump assembly
• Fuel pump (compact size:38mm diameter) (comparative low power: 2A current) (Flow rate: 25L/h)
• Fuel pressure regulator(2.5bar)
• Fuel filter
• fuel hoses and clamps
5.MAP sensor (1.05bar)
6.Engine temperature sensor
7.Intake air temperature sensor
8.CDI - for ECU controlled spark advance (optional, NOT included)
9.Oxygen sensor and bungs (INCLUDED)
10.Serial communication cable (to a computer)
11.Serial to USB converter (optional, NOT included)
12.CD - free tuning software (also downloadable) - Авто та транспорт
Hi everyone,
Sorry for not responding to your questions. We are not monitoring the UA-cam comments most time.
Please send an email to info@ecotrons.com and you shall be answered in one day.
This efi kit installation in 1985 Royal Enfield 350 it's possible
Can we do the opposite?
HOW MUCH ??? Please give a PUBLIC PRICE (same for evrybody!!!)
what ever finaly I M not french I m Indian so it s not the same price ?!?
@Amit Joshi Thank you 👍
informacion por favor
I want to buy this and then buy the turbo that is offered there. Not sure if I can fit the turbo on my Dr200 but I definitely want to make this work so bad
can you adjust the air/fuel for this system to run on ethanol or e85?
I bought it for turbo use, with a 2.5 bar map sensor and the 34 mm TB works fine! easy takes about 3 hours to get it working, and another 2 horurs and a lot off tie wraps to hide the wiring, but i dont complain for the money it is a great set!!
Thai Parts brother i want to install it on my motorcycle 78cc single cylinder cdi will it work plz let me know can i contact you on whatsapp or email my contact are
muhammadhassan1179@gmail.com
+923066447091
How much was the entire system?
If the ECM can be reduced to the size of a cigarette pack... like the one Painless Wiring uses with some of their plug-&-play/drop-in engine harness kits... then we'll more likely see EFI on production small-engines.
seems to run very smoothly..would you recommend it?is it still working?
How fuel economy have changed after such a good modification? And what about top speed?
Yes, there is a video of this kit on Honda GX35, search it in UA-cam
@MrEcotrons hey how is this kit actually working is it working great so for do u see any improvements is it better than your carb
hi, this is possible kit for motor Two Stroke Direct Injection in yamaha RD 350cc and YPVS year 91? thank you
I have question ; is it possible to convert a 1982 Suzuki gs1100K carburater to a EFI system using this kit or one like it? Pls get back to me
badass
Hi I have a 86 Honda la custom 250 twin bike. I am very intrested to know will I be able to convert the bike to a efi..pls advice will this systems work
hey how is this kit actually working is it working great so for do u see any improvements is it better than your carb
do you modified the magneto pickup or just plug n play?
so do you need to weld a nut to your exust for exust sensor
Quick question. Is there a kit for a 2007 Suzuki S40 Boulevard? how much would it be and do I need to get an expert to install it? (I know only very basic mechanical work)
is the normal air intake system is sufficient with this EFI conversion??? or have i to provide a performance airfilter to provide more air intake to the throttle bodyy????
i could have done without the music for sure
My question...can this kind of efi can be install on small car like 850cc 3 cylinder?
I have same with this bike how to order same on the video and how much it cause,tanx
I was woundering would this work or would have a kit that work on 1982 Suzuki gs1100g
Please help me with a good tune to try. I installed this kit to my GY6 Ruckus using the biggest throttle body Ecotrons had to offer and cant seem to get it running correctly. I runs fine if i make it super pig rich but doing that it idles quite high at stop and idle doesnt seem to be consistently stable. sometimes idles great but most of the times will idle high.Please let me know if you have a good map i can try please,. Thank you .
This is very important for my project plzzz
Whats the advantage of this over just stock?
do you have any instruction on how to install it .??
what are the dimensions of the finished Engine Fuel Injection Kit - 35cc to 300cc
Hi. I'm from Cape Town I would like to get this kit for my XR 125 Honda. Were can I get one for the best price?
excuse me,May I ask a question?? where did i can buy it??thank you
PAINFUL music ends at 02:09 and bike starts ad runs. Mute till then, then turn volume back on.
hello is that suzuki motorcycle? i think i have the same version but it is 125 cc version suzuki thunder. You think its aplicable for my bike
when you say pricy, what would be the price range sir? i hope its available here in the philippines, is it? thank you so much for replying sir.
Where can i buy that kit?? Please give me information
What's the title of the music in the beginning?
link to buy
Can this be installed in Yamaha Mio Sporty Scooter? How much is the cost for this kit? TIA
Hola , tenes algun link donde comprar ese kit de inyeccion?
I want Fuel pump and Injector pls give a buy link bro for my Zmr 225cc
where can I buy this system
Can you install it on my weed whipper?
How do put crank map sensor etc
Hi would this kit work on a Indian bike brand it's a Baja pulsar 180cc carburetor single cylinder. Please can you explain
Hola amigo donde consigo ese kit
Yo tengo una motocicleta 250
Si me puedes pasar los datos gracias
Is there a conversion kit for yamaha sz 150 cc and how much please?
Hello do you sell a kit for Honda GX 25 and GX35 series engine ? the Engines are for RC aircraft .
Where do I buy this Conversion kit
It failed to explain how a signal of emission of wheel signal or wheel signal (coil
Where is this kit available and how much does it cost?
Is it can fix honda benly 125?
hello how much and how much did this system cost
Hello, Can you share this project?
hola donde lo conseguiste
I want to buy this
Donde puedo conseguir el kit de Inyección electrica
I too would like to know if this would work on a 2007 Suzuki S40, single cylinder 650cc standard cruiser. I saw on the website that there is a kit for I think 400cc-800cc engines but I have yet to hear of anyone putting it on the Suzuki Savage. Also, like Rob C asked, how difficult would this be to install? What are the main benefits of doing this? I spoke to some Suzuki experts and they said the benefits would not be huge as this bike has a great carb, but I think the benefits would be good
What carb do u have on it
where can i but this kit
how much it cost? link to buy that kit?
Like it bro...can it use for hi rev (12K rpm)?
Dónde consigo uno para un 300cc
@adiiibn : yes, max rpm 16k.
@shawnsuperpocketbike
certainly it's better than carb. how could it not?
google ecotrons efi kits, there are some very detialed posts evaluating the kits.
Came for the build. Left because of the ‘music’
HOW MUCH IT COST ? WHERE WE CAN ORDER?
Where did you get the kit
Where can I order this?
where to buy this?
bro ... i want this kit
where should i buy this parts which u mentioned above
www.ecotrons.com
can i use this in honda CB twister cb110 bike ????? reply
Yes, it can be.
Boss ilan po magagasto ko kpag nagpaconvert ako
como quiero una de esos para mi moto
can it be applied to the engine of Honda XL 100? im planning to convert it to EFI to make it more fuel efficiency.
PCVideos In High Definition how ?
how to buy that kit sir?
donde lo consigo
The injector is so blasted far from the cylinder this is basically TBI it seems to me.
Can we do the opposite?
how is it timed though? thats what I was wondering
Magnetic " clips " on flywheel
how hard it is to tune the ecu? planning on buying a kit someday for a turbo project
10 years ago comment nice
@@marcthebarber239 Obama
What is the price
Sir? how much it cost all and all? can this Efi kit fit to any 150cc Carburetor type? like 150cc Underbone?
The kit is $599 total. It can fit to most 150cc single engines. But please send your engine spec. to our support team. They will tell you what kit is suitable.
san nakakabi ng kit na ganyan?
Price?
did you change the magneto?
No, our ECU can read the stock pickup.
What’s with the music? Maybe just explain what we are looking at
Location boss
Yes, we do sell a kit for GX35 gx25 engines. We have made a bolt-on kit for GX35. with throttle body adapter, coil, CDI, hall sensor etc.
You will need solve the 12V power supply, like a 12V battery and charging capability. EFI requires 50W power max.
I want to order how much pls dm me
what injector size did you use on this 150cc?
IGNITUS software.Please upload
hm po pa convert?
????? Eso es todo?
Boss tumipid ba
music sucks video is awsome
Artem Nikitenko make your device silence😂😅
The same kit from alixpress, The make The parts others import them
it would be nice if the kits didn't cost $600 and up! otherwise I'd love to buy one of these
Should have watched with the sound off 😞
Hola
can you email me your efi carburator drawing
group buy for the ninja 250 kit going on now through ninjette.org. check it out!
Unlike normal, this aftermarket FI consume too much battery to run fuel pump, the injector solenoid stuck wityout any reason… shit. Drain battery quickly
fuckin love the music
3A.