Just installed the HYPERPACK BUNDLE from TST industries. I have to say, this is by far the best kit I have seen on the market for this bike. It looks incredible, easy to install (thanks to all the TST install videos), and for a very affordable price!! I wold 100% recommend getting this kit, you will not regret it!!
I know what I'll be doing in a couple weekends from now. Can't wait to get this and all my other stuff from you guys, Nate and Ben helped me out BIG TIME today! Epic customer service skills.
Glad you have plug and play now. Had to solder the R3 version for mine. Looks so nice in smoked version! The blink mode really adds visibility. I like the mustang style indicators too
We actually have had the plug and play as soon as we advertised the MT03 specific light. Did you perhaps order the R3 version before we advertised the specific one?
Lol you can tell just how excited Bart is at 19:23 onwards. Waiting for mine too come in the mail btw. Great videos and I'm glad they are doing it on a smaller bike just like mine! Keep it up TSTindustries!
Wow what a time to get into the best lifestyle in the world!! Bikes these days are lightyears ahead of the carbureted junk that was in this price range during my early days!!
The little bikes are cheap and some additional cheap modifications extend their performance by big percentages. It is really a good time to get back in. I wish more people were getting back in, and the millenials just got it in the first place. I hope that there is a revival on the horizon, otherwise this awesome thing will die.
I bought that stop and it has not been possible to put the sequential turn signals to work since I do not know where the flasher is located to replace it or what other option I have so that the turn signals of that stop can work
If by any chance I installed the way you show in the video, and everything work’s fine, when the motorcycle is off but when you turn it on the lights stop working just blinks ones. What may be wrong..?
@@TSTindustries I have followed this video but when the machine turns off normally if the engine is running the turn signal turns off try making a video of the engine running Is the turn signal normal?
The relay on this bike is a convoluted one and nobody makes a replacement because it is only used on this bike. It is around the battery area and has 6 or 8 wires going to it (dont remember exactly at this moment). I figured out a way to circumvent the relay using one of pur 2 pin relays and make it work but its a cumbersome workaround so i didnt make the video installation for that.
Where is the flasher relay? I added the license plate led light for the fender delete and. And can’t find a video where the flasher relay is. Led caused my turning singles to blink stupid fast. All I found was the r3 flasher relay video. I bought the flasher relay thinking mt03 flasher relay would be the same and it doesn’t look like it is
We do not sell a replacement flasher relay for the MT03 because that particular component only exists on the MT03, and our current signal lamp offerings do not trip up the stock one. It was not worth it to pursue all the R&D to serve one bike model in some edge cases where another company's LED signal caused an issue with the signaling system. If you are purely asking because you want to find it, then it is a relay roughly 2"x2"x0.5", with a connector that houses 8 pins (this is from memory....may be 6 pins). It is located aft of the tank, in front of the battery, under the driver seat or on the frame rails just under the seat.
I bought the blue mt-03 2023 today, and recently I sent you an email asking for more information about the HYPERPACK BUNDLE FOR YAMAHA MT-03 2020+. As they don't deliver directly to Brazil, you asked my cousin to buy it for me, she will buy it at the beginning of June, which is when she comes here. I also sent a message on instagram, but I didn't get a response, I hope everything works out.
Our UA-cam response team cannot help you in this regard. You will have to contact customer service. If you are trying to have an order placed in your name using your credit card, but being sent to a different address, your order will be cancelled to protect our company against fraudulent transactions.
@@TSTindustries my cousin lives there in the united states for a long time, she will buy with her credit card and bring it to me as a gift. Thanks for the answer.
Sounds like you unplugged some other connectors along the way. The tail light and signaling circuits are 100% isolated from any circuit used for engine and FI control. Look in your trunk compartment. There is an ECU communications connector in there that has another connector with only one wire plugged into it. If this is not connected then please connect it back in. It looks like the tail light main connector but the housing is black. If you connected your tail light to this place then you need to unplug it, watch the installation video again, and then connect the the correct plug more forward on the bike.
@@TSTindustries nevermind you are correct, the two black connectors weren’t connected in the back housing. Thank you so much! Will absolutely be purchasing merchandising from TST, incredible company, quality, and service!
Please contact our support department. You can also track your shipment. In todays climate the shipping companies often experience delays. We ship all orders within one business day of order receipt.
Hola. Instale el producto de la manera correcta. Cuando la motocicleta está apagada las luces del dispositivo funcionan bien. Pero cuando el vehículo se pone en marcha, las luces de giro solo encienden una vez y se apagan. Que es lo que esta pasando?
Sorry but I do not speak Spanish well enough to be able to help you. From what I understand your signals flash only once and then shut down. I would need more information about your bike and other aftermarket equipment installed on it to be able to make a better assessment.
If you purchase the tail light through the product page specific to this bike then you will receive the tail light with the smaller connectors terminating the tail light harness, and then two sub-harnesses that convert the connection to the proper electrical connector. If for some reason you purchased the tail light through a product page for the R3 or MT07 then the tail light comes with bno sub harnesses.
@@TSTindustries sorry the connector just looked like it didn't fit at a glance but the light is working perfect and looks amazing alongside the tail today I order from you guys and the halo running lights. I hope you guys restock some of the exhaust systems soon. Can't wait to order
Hello sir! Ok so I install mine but Now every time I turn on the bike it won’t stay blinking I have to turn off the bike for it to stay blinking any ideas?
It is a toggling logic. Kinda like having a folder for each brake mode, with three signal modes available within that folder. Assuming you are starting with standard brake, standard signal this is what each press of the button would get you: 1. Standard brake, sequential signal 2. Standard brake, pulser signal 3. Strobe alert brake, standard signal 4. Strobe alert brake, sequential signal 5. Strobe alert brake, pulser signal 6. Pulser brake, standard signal 7. Pulser brake, sequential signal 8. Pulser brake, pulser signal 9. back to standard/standard
@@raymundpapa647 are you in the USA ? This response assumes an MT03 with the American market electrical system. There is no plug and play method yet as we have not made all that kid of harnessing with the newer Yamaha connectors. The USA version of the bike has the new sealed connectors. The harness converters for the rear of this version bike are CVY02. The same connectors are on the tail light signal leads so now you have two female sides but only one male side on the bike harness. We have not released a Y splitter harness yet as there has not been much demand for that. So your best bet is to hook up the regular signals through a CVY02 and then cut off the connectors from the tail light signal leads and wire those into the positive side in each CVY02 (yellow). This is the easiest and the crudest way but will get the signals in the tail light and your external signals working simultaneously. If you've got some skill, patience, and tools you can make a better setup where everything plugs together without wiring. All in how much work you want to put into it.
Those do not have a flasher relay. The flash controller is integrated with other electronics. The good news is that our lighting is compatible with the stock flash controller
We do sell external signals that you can use so you don't have to be concerned about the spacing. In fact we have Y-splitters that make connecting an integrated tail light and external signals all plug and play so you can have both.
It's not legal § 699. Turn Signal Lamps. 13 CA ADC § 699 BARCLAYS OFFICIAL CALIFORNIA CODE OF REGULATIONS Front and rear turn signal lamps on motorcycles shall be at least 23 cm (9 in.) apart, except that front turn signals on motorcycles manufactured after January 1, 1973, shall be at least 40 cm (16 in.) apart. Turn signal lamps on other vehicles shall be spaced as far apart as practical.
Are you serious? Everything in this TST Industries video is produced by TST Industries. This is why we make the videos as instructions for our products.
Just installed the HYPERPACK BUNDLE from TST industries. I have to say, this is by far the best kit I have seen on the market for this bike. It looks incredible, easy to install (thanks to all the TST install videos), and for a very affordable price!! I wold 100% recommend getting this kit, you will not regret it!!
Glad you enjoy it! Thanks for the amazing comment.
I know what I'll be doing in a couple weekends from now. Can't wait to get this and all my other stuff from you guys, Nate and Ben helped me out BIG TIME today! Epic customer service skills.
I really appreciate the effort you take on showing us the little details
Glad you have plug and play now. Had to solder the R3 version for mine. Looks so nice in smoked version! The blink mode really adds visibility. I like the mustang style indicators too
We actually have had the plug and play as soon as we advertised the MT03 specific light. Did you perhaps order the R3 version before we advertised the specific one?
Lol you can tell just how excited Bart is at 19:23 onwards. Waiting for mine too come in the mail btw. Great videos and I'm glad they are doing it on a smaller bike just like mine! Keep it up TSTindustries!
Well, this tail light is like one of my babies. I created it and it went out into the world and made many people happy. Got to be excited about that.
Mannnnn that rear end looking right!!
We agree!
Wow what a time to get into the best lifestyle in the world!! Bikes these days are lightyears ahead of the carbureted junk that was in this price range during my early days!!
The little bikes are cheap and some additional cheap modifications extend their performance by big percentages. It is really a good time to get back in. I wish more people were getting back in, and the millenials just got it in the first place. I hope that there is a revival on the horizon, otherwise this awesome thing will die.
just wonderful Yamaha
I installed mine including the front turn signals with the halo and I love the look of my bike lol
Thanks for the support!
i loved!! trying to buy mt03 this year... Greetings from Brazil.
Good choice!
Awesome video and product!
I bought that stop and it has not been possible to put the sequential turn signals to work since I do not know where the flasher is located to replace it or what other option I have so that the turn signals of that stop can work
If by any chance I installed the way you show in the video, and everything work’s fine, when the motorcycle is off but when you turn it on the lights stop working just blinks ones.
What may be wrong..?
Hi Sir , can I know MT-25 need flasher relay or not if I install TST tail light?
I didn't found where it located?
Try turning on the machine after installing the LED to see if there is an error or not
If the steps shown in this video are followed, there will not be any errors.
@@TSTindustries I have followed this video but when the machine turns off normally
if the engine is running the turn signal turns off
try making a video of the engine running
Is the turn signal normal?
wheres the flasher relay located on this bike ,i am having issues locating the relay ,my turn signals are not blinking,thanks
The relay on this bike is a convoluted one and nobody makes a replacement because it is only used on this bike. It is around the battery area and has 6 or 8 wires going to it (dont remember exactly at this moment). I figured out a way to circumvent the relay using one of pur 2 pin relays and make it work but its a cumbersome workaround so i didnt make the video installation for that.
Where is the flasher relay? I added the license plate led light for the fender delete and. And can’t find a video where the flasher relay is. Led caused my turning singles to blink stupid fast. All I found was the r3 flasher relay video. I bought the flasher relay thinking mt03 flasher relay would be the same and it doesn’t look like it is
We do not sell a replacement flasher relay for the MT03 because that particular component only exists on the MT03, and our current signal lamp offerings do not trip up the stock one. It was not worth it to pursue all the R&D to serve one bike model in some edge cases where another company's LED signal caused an issue with the signaling system. If you are purely asking because you want to find it, then it is a relay roughly 2"x2"x0.5", with a connector that houses 8 pins (this is from memory....may be 6 pins). It is located aft of the tank, in front of the battery, under the driver seat or on the frame rails just under the seat.
I just waiting my new mt-03, you receive to Russia?
I bought the blue mt-03 2023 today, and recently I sent you an email asking for more information about the HYPERPACK BUNDLE FOR YAMAHA MT-03 2020+. As they don't deliver directly to Brazil, you asked my cousin to buy it for me, she will buy it at the beginning of June, which is when she comes here. I also sent a message on instagram, but I didn't get a response, I hope everything works out.
Our UA-cam response team cannot help you in this regard. You will have to contact customer service. If you are trying to have an order placed in your name using your credit card, but being sent to a different address, your order will be cancelled to protect our company against fraudulent transactions.
@@TSTindustries my cousin lives there in the united states for a long time, she will buy with her credit card and bring it to me as a gift. Thanks for the answer.
Hello I installed this exact integrated tail light and got an er-1 code and a check engine light. Any tips?
Sounds like you unplugged some other connectors along the way. The tail light and signaling circuits are 100% isolated from any circuit used for engine and FI control. Look in your trunk compartment. There is an ECU communications connector in there that has another connector with only one wire plugged into it. If this is not connected then please connect it back in. It looks like the tail light main connector but the housing is black. If you connected your tail light to this place then you need to unplug it, watch the installation video again, and then connect the the correct plug more forward on the bike.
@@TSTindustries nevermind you are correct, the two black connectors weren’t connected in the back housing. Thank you so much! Will absolutely be purchasing merchandising from TST, incredible company, quality, and service!
Este hombre es muy minucioso ,qué maravilla.
Is it possible to use both the integrated turn signals, as well as the stock turn signals?
What connector would make that possible?
Thanks!
I second this?
Is this also possible for my yamaha mt03 2017?
Brother can you send me one of this so i can install to my Yamaha Sniper 150 and make a review on my channel...God bless and more power!
Will you need the relay to slow the blinking to stock blinking rate or is there no need for it on the MT-03?
No need for it on this bike.
I made my purchase on your website and I still haven't received my product. What can I do?
Please contact our support department. You can also track your shipment. In todays climate the shipping companies often experience delays. We ship all orders within one business day of order receipt.
Just got mine now I need to install looking for a good exhaust n for this bike as well, you guys do not carry the m4 exhaust thats what I want.
We do not carry M4. We currently have Yoshimura and Toce, and rolling out our offerings of Graves exhausts soon.
Hola. Instale el producto de la manera correcta. Cuando la motocicleta está apagada las luces del dispositivo funcionan bien. Pero cuando el vehículo se pone en marcha, las luces de giro solo encienden una vez y se apagan. Que es lo que esta pasando?
Sorry but I do not speak Spanish well enough to be able to help you. From what I understand your signals flash only once and then shut down. I would need more information about your bike and other aftermarket equipment installed on it to be able to make a better assessment.
How do you program the turn signals?
You toggle through the programs using the button on the black part of the tail light that is accessible from the trunk.
Cheers!! are you still selling this system for the mt 03 2020?
Yes of course
The tailoghr I ordered through you guys has a smaller signaling light wire connector
If you purchase the tail light through the product page specific to this bike then you will receive the tail light with the smaller connectors terminating the tail light harness, and then two sub-harnesses that convert the connection to the proper electrical connector. If for some reason you purchased the tail light through a product page for the R3 or MT07 then the tail light comes with bno sub harnesses.
@@TSTindustries sorry the connector just looked like it didn't fit at a glance but the light is working perfect and looks amazing alongside the tail today I order from you guys and the halo running lights. I hope you guys restock some of the exhaust systems soon. Can't wait to order
mt15 can equip?
Hello sir! Ok so I install mine but Now every time I turn on the bike it won’t stay blinking I have to turn off the bike for it to stay blinking any ideas?
What bike exactly and what else do you have connected to your signaling system?
Press the button 3 times to change the stop light mode and press 1 time for the signal lights mode?
It is a toggling logic. Kinda like having a folder for each brake mode, with three signal modes available within that folder. Assuming you are starting with standard brake, standard signal this is what each press of the button would get you:
1. Standard brake, sequential signal
2. Standard brake, pulser signal
3. Strobe alert brake, standard signal
4. Strobe alert brake, sequential signal
5. Strobe alert brake, pulser signal
6. Pulser brake, standard signal
7. Pulser brake, sequential signal
8. Pulser brake, pulser signal
9. back to standard/standard
@@TSTindustries thank you! Good info.
Hello, can I install this tail light and use the OEM turn lights???
Sure thing. Just leave our turn signal connectors disconnected.
Do you need the 2 Pin LED Flasher Relay from you guys when doing this mod?
Not on the MT03. That bike does not have that kind of a relay, and the tail light does not trip up the signaling system all by itself
-BR
@@TSTindustries Yall are amazing. Ordering today. Thank you!
@@ChaseLancaster you're welcome. Cheers!
-BR
Can you add a turn signal with the programmable tail light on the MT03? If so how do you wire it?
Yes you can. For the most comprehensive instructions on how please direct your questions to our customer service department through our website.
I did but they're saying it wont work. Eventhough i purchased the CVY01 connector that they said i needed.
@@raymundpapa647 are you in the USA ? This response assumes an MT03 with the American market electrical system. There is no plug and play method yet as we have not made all that kid of harnessing with the newer Yamaha connectors. The USA version of the bike has the new sealed connectors. The harness converters for the rear of this version bike are CVY02. The same connectors are on the tail light signal leads so now you have two female sides but only one male side on the bike harness. We have not released a Y splitter harness yet as there has not been much demand for that. So your best bet is to hook up the regular signals through a CVY02 and then cut off the connectors from the tail light signal leads and wire those into the positive side in each CVY02 (yellow). This is the easiest and the crudest way but will get the signals in the tail light and your external signals working simultaneously. If you've got some skill, patience, and tools you can make a better setup where everything plugs together without wiring. All in how much work you want to put into it.
where is the flasher relay located on this bike?
There is no flasher relay.
Why is there Turkey no delivery option? How can I buy?
The Turkish government recently started rejecting entry for our packages.
@@TSTindustries OMG
i'm so sorry
I wanted to buy your perfect products
Where is the flaser relay or mt 03 2020 model?
Those do not have a flasher relay. The flash controller is integrated with other electronics. The good news is that our lighting is compatible with the stock flash controller
gives to the mt 03 2018??
Pre-2020 mt model is different and this part is not compatible with it
Ive so. I will order at ones
Are those legal I heard that the turn signals have to be 9 inch a part
We do sell external signals that you can use so you don't have to be concerned about the spacing. In fact we have Y-splitters that make connecting an integrated tail light and external signals all plug and play so you can have both.
TSTindustries nice have to check that out
I wish i have that kind of motorcycle🙏🙏🙏
get on that
@@TSTindustries no money for that motorcycle😭😭
Sir where is the signal light relay please
There is no relay on this bike.
Sir where can i order?
Frm philippines
Directly from our website.
hallo boss how i get this itme .i am from india
Check description.
Anyone know if this is legal in California?
It's not legal
§ 699. Turn Signal Lamps.
13 CA ADC § 699
BARCLAYS OFFICIAL CALIFORNIA CODE OF REGULATIONS
Front and rear turn signal lamps on motorcycles shall be at least 23 cm (9 in.) apart, except that front turn signals on motorcycles manufactured after January 1, 1973, shall be at least 40 cm (16 in.) apart. Turn signal lamps on other vehicles shall be spaced as far apart as practical.
About making some stuff for the CB300R 😉
We are getting some parts here soon to start the reverse engineering process. We will come out with some parts in the near future.
Easy installation my ASS Guy🤣🤣🤣🤣🤣🤣
Name of the signal light please, ...where can i buy it?
Are you serious? Everything in this TST Industries video is produced by TST Industries. This is why we make the videos as instructions for our products.