Unleash the True Potential of Your 1/6 RocHobby Willys MB Jeep: Part 2 Overview

We found that these modifications significantly improve both the performance and look of the stock 1/6 MB Scaler Jeep from RocHobby / FMS . The forward battery placement gives a better weight distribution and stiffer chassis. The leaf spring mod look s great and actually improves the ride. Full lighting, sound and other simple scale mods also enhance the model too.
3D parts (printed in PETG - similar properties to ABS, very strong and durable) can be purchased from us at [e-mail]. Prices entirely based on printing time - £4/$5 per hour postage and packing free in the UK and US. Minimum order £8/$10. Prices subject to change over time.
We intend to produce more videos in this series. Including full building instructions and hardware listings.
Some (paid for) affiliate links. Additional hardware (nuts and bolts etc were used, but will be covered in upcoming videos). Buying items using these will help us to keep the channel going to bring you more content:
UK links
Stock 1/6 Jeep model : amzn.to/3S8kJDH
Stock 1/6 Trailer, 1/4-ton, 2-Wheel, Cargo, Amphibian : amzn.to/3QlQMib
Radiolink RC8X 8 Channels 2.4G RC Transmitter : amzn.to/3M05o3R
Radiolink 2.4G R7FG 7 Channels Gyro Receiver : amzn.to/3Q2RvTI
Hard Leaf Spring Suspension Steel Bar for 1:10 RC Rock Crawler D90 Axial SCX10 (x2 sets) : www.ebay.co.uk...
2pcs Spring Shock Absorber, Aluminium Alloy Shock Absorber Damper Fit 102mm for RC Crawler( 2 pairs) : amzn.to/3FhGIjQ
HOBBYWING QUICRUN WP 1080 G2 Brushed 2-3s ESC : amzn.to/46RXz8v
Holmes Hobbies CrawlMaster Sport 12T (we used 15T in this truck, 12T a little faster
0 550 Brushed Crawler Motor : amzn.to/3Skye3h
USA - United States Of America Hand Waving Flag 6" x 4" inch : amzn.to/46NePeY
4 Pin Waterproof Electrical Connector 24AWG IP65 Male Female Connector : amzn.to/3QlrgJR
CW1308 Solid Copper Telephone/Broadband Extension Cable : amzn.to/3Q38ANs
ORX GT Power SMART 1/10th Scale Realistic RC Car LED Lighting System amzn.to/48OxEQS
DasMikro TBS Mini Programmable Engine Sound Unit : www.ebay.co.uk...
ON/OFF/ON Mini Miniature Toggle Switch Car Dash Dashboard 3 position SPDT : amzn.to/3QiJI5Q
1K Logarithmic 16mm Potentiometer : amzn.to/3PYmpwK
600pc Stainless Steel Screws Nuts Assortment Kit Set M1 M1.2 M1.4 M1.6 Very Small : amzn.to/3S9KqU2
RC Remote Controlled AUX on/Off Electronic Switch : amzn.to/498a0iC
RC Receiver RX Controlled ON / OFF Switch For LED Lights : www.ebay.co.uk...
Antenna, Black Metal Decoration Accessory : amzn.to/3M3VjmI

[@Del350K4]

Frankly, I'm practically speechless - these are a list of eminently well thought-out modifications.
Some, such as painting the light reflectors, take more time than money and offer a huge 'return' for that time.
Others, such as the 3D printed longitudinal roof bars for the canvas tilt, are a triumph of ingenuity.
And where you have put money into the Jeep, such as the leaf-spring conversion, you've spent that money wisely.
Good work all around!

[@RCModders]

Thank you Del. I’m pleased with the changes I made to this. And surprisingly it actually performs better (in our view) than the stock 4-link suspension - which felt all kinds of wrong to us 😂🤣

[@Del350K4]

@@RCModders I remember being into full-size Suzuki SJ410s, and, despite their tremendous ability, yearning for coil springs. Yet now I deplore the fact that my WPL and MN Models FJ40 and 45s all have coils. It really is wrong! I love the 1:12 FMS Series IIA Land Rover.

[@iggy954]

You and Hal have done it again with these upgrades Pete. Very well done guys👍🏽

[@RCModders]

Many thanks!🙏😁

[@MysticRiverRC]

Very nice scale mods and performance improvements. Bravo!

[@carloshnunez]

Very nice upgrades is very realistic now
🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵

[@RCModders]

Many thanks for your kind comment. 😁

[@michelpremieux4916]

Très belle modification BRAVO ou on peu trouver des pièces des personnages pour faire ses modif la batterie devant excellent merci

[@anthonysimpson5801]

That's the first time I have seen a realistic looking suspension set up for this model. Mine is an SAS version however so needs a very soft suspension to simulate the very heavily loaded SAS jeep. Is there a suitably soft shock that looks the same? I would also highly recommend fitting a micro servo into the figures chest, mounting the head directly into the spindle and connecting it with a 'Y' lead into the steering wheel servo. You will need an in line reversing unit as well. The difference the head turning with the steering wheel makes is significant and always gets the most comments.

[@2Geek2bChic]

I'm so happy to see someone do an under axle leaf spring conversion for a change! It looks like you had to make some custom hangers for the leaf springs, is there a way to purchase these? 🤓

[@mikeymike3240]

If I asked you nice enough would you please print me all of your 3D printed parts and I will pay you for your work. The willys jeep is my all time favourite vehicle, even up to today 😊
Ps……you’re 3D printed parts are amazing 😮 you have great talent.

[@RCModders]

Thank you. If you drop us a line at [e-mail] I’m sure that we can sort you out. If you get stuck before the build videos we can help too. 😁👍

[@MidnightVisions]

Where did the low profile seat mod come from?

[@RCModders]

I don’t think this requires any parts. Just trimming. If you email us at [e-mail] we can send pictures we took while we this via WhatsApp. This allows the drivers head height and seating position to be a lot better.