THANK GOD FOR YOU! I am a 56 year old lady with just a screwdriver to work with. But you where able to walk me through the "Co" error code (Master reset?) Or what ever its called. I was able to follow along with your video opening up the control board thing and using a jump wire . after I connected the jum to the ground, it clicked and came to life again, the propane igniter lit up and everything's back to normal again. FIXXED! Thank you so much. If I can do it, anyone can. If they follow your easy instructions. THANKS
I wouldn't say it if it went true! I did want to add that the next day I got to the bottom of the issue and found the cause for the code was because rodents had gnawed on some wiring under the trailer. I fixed up the wires and no more trouble with anything! But your video, saved me. Thank you The handyman from heaven lol
IT WORKS! I cant thank you enoughf! Istarted having other electrical issues later that day tho and found a bundle of wires up front that mice had stripped. Fixed them and everything's been running perfectly since! Just check the wires by your battery's also, just in case...
Just purchased a 2002 Winnebago Journey 36c. The refrigerator does not work on AC or LP. I looked at the board outside which has no cover. I don't reallyknow what i'm looking at. All i found was there are two red wires disconnected that go to this little valve that states 12 volt where the wires come out. I can see it was plugged in and the glass fuse looked good.
Great video. I for the first time encountered the "no co" code on my Norcold N843 fridge. Not working on either AC or LP. Your reset procedure did the trick....thanks!
Hello I have the exact same fridge and the mother board has some wires disconnected. It has the 12v disconnected and I have no idea where the wires go. My wife and I just bought this allegro bus and I need to figure this out to celebrate my wife’s birthday. I can not find the schematic and it does not have the safety recall shutoff. Please help me. Thank you.
www.manualslib.com/manual/112570/Norcold-1200xx.html#product-1200LRIM Check this manual out. Should be helpful! But if it’s the same exact fridge, the wires should go in the same places as you can see on mine in the video.
@@jackmaness202 I had same symptoms as you I fixed by replacing the blown out 5Amp glass fuse. Just hope its an old fuse that just happened to go bad and not a sign of an underlying issue like a bad fan or heating element. Of course, after correcting NO AC now I'm getting NO CO which led me to this video.
If anyone is trying this and their power board has a different layout. Mine has a section called ‘P2’ located top left on the power board. I put the wire in the 5th hole (second to last) and grounded it to the metal case of the fridge. Heard the click, turned the fridge on and off again. Problem solved.
I’m sorry, but you’re going to have to be a little more specific. Is it giving you a code? Maybe the door is slightly open? I know with mine, it was finicky, and sometimes it said it was “open” so I would have to push on the left door and it would stop.
THANK GOD FOR YOU! I am a 56 year old lady with just a screwdriver to work with. But you where able to walk me through the "Co" error code (Master reset?) Or what ever its called. I was able to follow along with your video opening up the control board thing and using a jump wire .
after I connected the jum to the ground, it clicked and came to life again, the propane igniter lit up and everything's back to normal again.
FIXXED! Thank you so much.
If I can do it, anyone can. If they follow your easy instructions.
THANKS
I appreciate your kind words!
I wouldn't say it if it went true! I did want to add that the next day I got to the bottom of the issue and found the cause for the code was because rodents had gnawed on some wiring under the trailer. I fixed up the wires and no more trouble with anything! But your video, saved me. Thank you
The handyman from heaven lol
IT WORKS! I cant thank you enoughf!
Istarted having other electrical issues later that day tho and found a bundle of wires up front that mice had stripped. Fixed them and everything's been running perfectly since! Just check the wires by your battery's also, just in case...
It worked I couldn’t believe it!!! Thank you so much saved our camping trip… trying to figure out how to thank you !!!
That’s awesome! Paying it forward! An RV mechanic told me about it over the phone, saved me a lot of money! God bless!
Thank you it worked perfectly and the fridge is working properly again. Great video.
Awesome!
Worked exactly as shown. Thank you for the video ...
Heck yeah!! That’s awesome!!!
Thank YOU.....I did it and it worked on My refig...:)
That’s awesome ! Thanks for sharing
Thanks for sharing
You’re welcome! Thanks for watching!
Just purchased a 2002 Winnebago Journey 36c. The refrigerator does not work on AC or LP. I looked at the board outside which has no cover. I don't reallyknow what i'm looking at. All i found was there are two red wires disconnected that go to this little valve that states 12 volt where the wires come out. I can see it was plugged in and the glass fuse looked good.
Is the fridge the same brand and model as this one? And you’re getting the same error message?
The model is1201LRIM and getting same code for AC and LP code no flow@@VitosFix
Yeah, I apologize, but if the back doesn’t look like the one in my video, I’m not sure how to help with that one.
Followed your steps works 2000 Fleetwood Discovery
Awesome!
Great video. I for the first time encountered the "no co" code on my Norcold N843 fridge. Not working on either AC or LP. Your reset procedure did the trick....thanks!
That’s awesome to hear! A guy told me how to do it, saved me a lot of money! Glad it worked for you as well!
Hello I have the exact same fridge and the mother board has some wires disconnected. It has the 12v disconnected and I have no idea where the wires go. My wife and I just bought this allegro bus and I need to figure this out to celebrate my wife’s birthday. I can not find the schematic and it does not have the safety recall shutoff. Please help me. Thank you.
www.manualslib.com/manual/112570/Norcold-1200xx.html#product-1200LRIM
Check this manual out. Should be helpful! But if it’s the same exact fridge, the wires should go in the same places as you can see on mine in the video.
My Norcold 121 starts up on propane but will not throw a flame more than like a pilot flame, ac setting works as it should, what’s up?
Haven’t seen this one. How long did you wait? Is the refrigerator already cold or is it warm?
Thanks for great help and video
Very helpful! Thank you so much.
no AC code is on but have lights inside the fridge? Hummm?
Same, keep watching. I was saying that if “it didn’t have lights on.”
@@VitosFix the lights are on but still got the “No AC” code. What’s wrong you think? Jack.
I figure it’s like having to reset a computer. Did you watch the entire video? It shows how to reset it, and hopefully fix you problem.
@@jackmaness202 I had same symptoms as you I fixed by replacing the blown out 5Amp glass fuse. Just hope its an old fuse that just happened to go bad and not a sign of an underlying issue like a bad fan or heating element. Of course, after correcting NO AC now I'm getting NO CO which led me to this video.
Thanks
Just to confirm the ground is the connector not the bolt to the right of it
Correct.
Norcold mentions touching the bolt head but hey same difference
The reset trick works for a couple days, then bam it goes off again. Any clue why?
Is the RV being moved after the reset? Are you trying to have the fridge run on LP while driving?
My ports don’t look exactly the same. Is Port 15 significant in any way it can I jump to ground in any empty port?
I would look a little deeper. If they don’t look the same, it might be a different model.
If anyone is trying this and their power board has a different layout. Mine has a section called ‘P2’ located top left on the power board. I put the wire in the 5th hole (second to last) and grounded it to the metal case of the fridge. Heard the click, turned the fridge on and off again. Problem solved.
Thanks!
How do I stop alarm from beeping
I’m sorry, but you’re going to have to be a little more specific. Is it giving you a code? Maybe the door is slightly open? I know with mine, it was finicky, and sometimes it said it was “open” so I would have to push on the left door and it would stop.