Cj7 Jeep steering gear box M.O.R.E. mounting bracket replacement on a 1985 cj7 Jeep part .3
Вставка
- Опубліковано 5 вер 2024
- I had way to much play in my steering on my Jeep, I noticed a bolt missing and another bolt was stripped and loose from the steering gear box mounting bracket. Looked like they tried fixing it by welding it to the frame but, they did a horrible job. Upon further inspection I also noticed the original bracket was cracked. No bueno señor! Since these frames are boxed for extra strength I had no way of accessing the nuts to replace the missing and stripped bolts. Inside the frame. After looking around to see how I could get to them, I had no choice but to cut my way to them. This was the last thing I wanted to do but, had to be done if I wanted to fix this problem the right way. I decided to cut a 1-1/2”x 1-1/2” hole in the crossmember and then welding it back on after. I took 2 grade 8 nuts and welded a 1”x1” flat stock piece on to them (so they wouldn’t spin when I tighten the bolts.) and inserted them through the hole I cut on the crossmember. Worked out good I was able to install the new heavy duty bracket I purchased from M.O.R.E. (Mountain Off Road Enterprises) which works great, only complain about it is that the bolts they sent to mount the gear box onto the bracket are about 1/2” to short. I had to go get 2” instead of 1-1/2” long bolts, not a big deal. Everything came out good well, so far no problems.
Thanks for the video, you just solved a huge problem for me and my son! We have been battling the same problem with our CJ steering gear! Awesome and Thanks!
Glad to the video help out! I had been looking for a way and couldn't find much
Love the lil tab's you made for the nuts 💪💪.tell shady I said what's up.
TANTAN Racing had to get a lil creative to make it work que no
@@mrbogie4392 yes sir
Right on, Big Thumbs Up! 👍
Mudnut59 thanks brother!
Good video looking at getting one of these took mine off. To upgrade to power steering. Does the 3 bolts on the bottom thread into the nut certs in the frame from the factory? Tks
Negative they screw into the top of the bracket, I also put some lock washers and nuts.
I can verify and send you some pics if that would help.
Thay would be awesome if you dont mind tks
@@lissandavegreen no worries. Want me to email them?
@@mrbogie4392 sure ford78david@aol.com
Shit goes faster with 2 hands hahahahaha. Keep on wrenching
Desmadre15 that’s right play boi! Keep on keeping on!