Its easy guys just follow a video tutorial. Its really not that bad. I did it for the first time the other day and was done in an hour and a half . I took my time but u can do it faster. I replaced the whole shell i felt like a tech guru
Phenomenonal video, poured a little bit of coffee on my DS Edge n the R1 became sticky after a while, this was a great help, instant sub' to your channel!
4:01 What is the name of the part that presses the button behind the controller? This plastic part with a magnet for the pedal broke. I want to find this part, but I don’t know what it’s called.
You mentioned providing a link to the module for the rear paddle at 4:39 but the only links provided are for analog stick replacements, not the board you're pointing to.
I went to the description to find the link for the back button module in hops to find a link to the mechanical part removed at 3:50. mine keeps breaking and i just want to get a few to have on hand. However no link were there.
@How-FixIT please could you tell me where can we find the metal part with a magnet that you remove in your video at 4:01 please it's urgent I have one that broke and I don't want to buy a new controller just for that. please thank you for your answer
@@eeesawk I couldn’t find where to put them so I just left them out mate, no dramas so far and have been using it for around 6-7 days pretty consistently. I kept them in a zip lock just incase I find a video or explanation on where they are meant to go
Those two plastic sheets are from the tigger switch. They should be fixed inside of the back panel. Make sure to put them in the correct position so when you put back the front part of the controller, you won’t damage the plastic sheets with the trigger switch. Hope that helps.
Esas laminas se rompen con facilidad, al romperse no cubriría la garantía, sabrían que el mando se ha abierto. Alguno sabe donde conseguir piezas del mando?
Hello, I would like to know if it's safe to remove the vibration motor from the dual sense edge, or if I remove it will not work as should. Someone can help me with that please
Would the silicon pads from a regular Dualsense fit in the Edge? Asking because on mine the buttons feel much more mushy than the one the console came with so I'm wondering if I could just swap the silicon button pads to retain the feel.
Most dualsense edge are like that or worst, i have replaced like 3 controllers andsome are worst, he mentioned in this video that he put a link for the rubber buttons thing in the description but its not there. Im trying to fix mine, did you fix yours? Amazon does sell the conductive rubber pads but its specified for dualsense so i dont know if it works on the edge. Someone on reddit said he had to cut the rubber from the dualsense to transfer it to the edge
where can I find that mechanical elements left back paddle? I broke mines @4:01. please help me. not trying to buy a new remote thanks in advanced. @How-FixIT
Please help at the part of 31:53 I can't get this piece to click back into place everything else has slotted back fine but this piece won't go back please help!
Does anyone know how to fix the stick module error cause I’ve tried everything and my controller has been bugging and due to the controller stick module error which a lot of people have been having problems with
is anyone else having problems putting the back cover back on? the one that has the serial number on it? i cannot for the life of me get that back on properly...anytips would be appreciated i tried lining up the bottom tabs first then pushing it around evenly but one side or the other wont fully click in & it stops the back buttons from being properly used since the distance is not the same
@@victorcantu1014probably too late, but maybe it helps someone else. You need to slightly squeeze the hand grips together and begin inserting the mic jack portion first. Seat the bottom and the rest snaps in nicely.
I’ve tried doin this however now my microphone mute button is super stiff and also the touchpad is almost as if it clicks twice when i press it somebody please help
The buttons should be as easy to swap out as the joysticks. My x button was working fine, I turned my ps5 off to make a run and come back to it not working. To have to do all of that for 1 button is ridiculous.
Hello! My back buttons are not working anymore.. and when a button is assigned for example to X, the regular X button also does not work. However, when I change to default profile, the normal X buttons works again. Do you maybe know what the issue could be?
The back button internal piece broke on my controller. After 4 hours of trying to contact support for my warranty they tell me to ship it to them and I have to pay for shipping.. 200 dollar controller and they don’t give me a box and make me pay to get it repaired smh. Still waiting on it to return now .. that piece should not be plastic. It’s like extreme rate first generation when it was plastic and now it’s metal, they need to update it
@@JackTheReaper758 doesn’t matter how much u used it if u dropped it he can still break depends the angle u dropped it at how high u dropped it, it only takes one time
Your telling be i have to remove everything just to get to the buttons 😐
I see we both are fucked😢
Its easy guys just follow a video tutorial. Its really not that bad. I did it for the first time the other day and was done in an hour and a half . I took my time but u can do it faster. I replaced the whole shell i felt like a tech guru
Phenomenonal video, poured a little bit of coffee on my DS Edge n the R1 became sticky after a while, this was a great help, instant sub' to your channel!
Had something under one of my buttons that was making it sticky. This video was such a great help. Thank you so much! 🎮
You saved my laptop with the battery and now you save me with my controller
this is great thank you!! fixed my Square!
4:39 @how-fixit I don’t see a link to purchase this LB replacement module?
In the video description 👆
No actually there is only a link for the joy stil module @DONTCRY_Coops
Thank you very much. The video is very helpful for me.
amazing work man!
you are an absolute godsend. liked and subscribed 👍🏽
I cant see a link for the back button module
4:01
What is the name of the part that presses the button behind the controller? This plastic part with a magnet for the pedal broke. I want to find this part, but I don’t know what it’s called.
Lograste conseguir la pieza con imán? Yo tengo el mismo problema y nada q la consigo?
@@kalawey1627 Hello, were you able to find this part? because I have the same problem, I have one that broke
You mentioned providing a link to the module for the rear paddle at 4:39 but the only links provided are for analog stick replacements, not the board you're pointing to.
My new Edge came with a sticky D-pad and all four face buttons sticky as well.
WOW! Very impressive!
Where are you getting all the replacement parts the link only send to the stick modules
..I need ribbon replacements ... just about all of them
I went to the description to find the link for the back button module in hops to find a link to the mechanical part removed at 3:50. mine keeps breaking and i just want to get a few to have on hand. However no link were there.
Hello, were you able to find this part? Because I have the same problem, one of the two has broken. Thank you for your response
@@ManyChaw i found them on amazon " extremerate back paddle replacement magnetic module kit"
@How-FixIT please could you tell me where can we find the metal part with a magnet that you remove in your video at 4:01 please it's urgent I have one that broke and I don't want to buy a new controller just for that. please thank you for your answer
Their is a Little black sheet of plastic where is it from?
Any luck on finding where it’s from mate ? I also have two small black sheets of plastic and they look as if they are from the L1/R1 buttons
@@skillzz_hd8310found myself in the same exact position haha
@@eeesawk I couldn’t find where to put them so I just left them out mate, no dramas so far and have been using it for around 6-7 days pretty consistently. I kept them in a zip lock just incase I find a video or explanation on where they are meant to go
Those two plastic sheets are from the tigger switch. They should be fixed inside of the back panel.
Make sure to put them in the correct position so when you put back the front part of the controller, you won’t damage the plastic sheets with the trigger switch. Hope that helps.
Esas laminas se rompen con facilidad, al romperse no cubriría la garantía, sabrían que el mando se ha abierto. Alguno sabe donde conseguir piezas del mando?
Do I have to take all of the little ribbons and stuff off or can I go directly to the face button layer
Is it possible to replace the rubber pads on the interior of the controller? The ones your finger tips rest on.
Hello, I would like to know if it's safe to remove the vibration motor from the dual sense edge, or if I remove it will not work as should. Someone can help me with that please
Where I can found the back buttons module? Mine has broken 😞
Same 😞
Would the silicon pads from a regular Dualsense fit in the Edge? Asking because on mine the buttons feel much more mushy than the one the console came with so I'm wondering if I could just swap the silicon button pads to retain the feel.
Most dualsense edge are like that or worst, i have replaced like 3 controllers andsome are worst, he mentioned in this video that he put a link for the rubber buttons thing in the description but its not there. Im trying to fix mine, did you fix yours? Amazon does sell the conductive rubber pads but its specified for dualsense so i dont know if it works on the edge. Someone on reddit said he had to cut the rubber from the dualsense to transfer it to the edge
@@scarecrow03 i like to know too.
where can I find that mechanical elements left back paddle? I broke mines @4:01. please help me. not trying to buy a new remote thanks in advanced. @How-FixIT
Why do you to do completely take the thing apart to get to the stupid botton that is sticky. This is insane.. like actually f-in insane.
We’re can I find r1 r2
An there is no back button module replacement link an can't find em anywhere
Please help at the part of 31:53 I can't get this piece to click back into place everything else has slotted back fine but this piece won't go back please help!
It was pain in a** fixing it
please help i disassembly my controller but my paddles arent working what to do
Is it me or are L3 and the R3 buttons not as responsive as the ones on the original controller??
i realized that too
@@njo3188 weird right ? Maybe because they're removable
Does anyone know how to fix the stick module error cause I’ve tried everything and my controller has been bugging and due to the controller stick module error which a lot of people have been having problems with
Is there a shell replacement link
is anyone else having problems putting the back cover back on? the one that has the serial number on it? i cannot for the life of me get that back on properly...anytips would be appreciated
i tried lining up the bottom tabs first then pushing it around evenly but one side or the other wont fully click in & it stops the back buttons from being properly used since the distance is not the same
Did you find a way to put the back cover? Having the same issues, does not sit flush as it was.
@@victorcantu1014probably too late, but maybe it helps someone else. You need to slightly squeeze the hand grips together and begin inserting the mic jack portion first. Seat the bottom and the rest snaps in nicely.
I’ve tried doin this however now my microphone mute button is super stiff and also the touchpad is almost as if it clicks twice when i press it somebody please help
Today my back button seems to have fallen out of that silver bracket and sunken in. Now it won’t press down. Idk what to do
Did you found a fix? I’m having a similar issue
My left back button broke and sunked in ,where can i get a replacement
Same here. I guess, I'll have to replace it myself using this guide. Just gotta buy the replacement
I can’t get the back on to save my life. It is an extreme rate shell if that makes a difference
The buttons should be as easy to swap out as the joysticks. My x button was working fine, I turned my ps5 off to make a run and come back to it not working. To have to do all of that for 1 button is ridiculous.
I see it happening to every one… my x button stopped working out of the blue… 200$ and only lasted 4 months sick!
@@bluownz69 it was some type of glitch. I figured it out.
@@str8swish538what did u do bro. I need help really bad
My LB button is stuck. Literally just pressed it to hard in a match dropshooting & now it’s not sturdy.
What’s lb you mean l2
@@Demnosta LB are one of the back paddles. There’s an LB & RB.
Just change the paddles
Hello! My back buttons are not working anymore.. and when a button is assigned for example to X, the regular X button also does not work. However, when I change to default profile, the normal X buttons works again. Do you maybe know what the issue could be?
OMG I figured it out. I had the ribbon cables connected upside down🙂🙃
@@jeroenlammersma3772 ribbon cabbles what does that mean
crazy i have to remove everything from the controller JUST to unstick my options button
My fn button is on how do i fix this please
wow👏
Dónde puedo comprar el módulo del botón de retroceso 5:11
can you remove the rumbles in them?
Oh God you're one of those
I can’t get those screws 2:28
The back button internal piece broke on my controller. After 4 hours of trying to contact support for my warranty they tell me to ship it to them and I have to pay for shipping.. 200 dollar controller and they don’t give me a box and make me pay to get it repaired smh. Still waiting on it to return now .. that piece should not be plastic. It’s like extreme rate first generation when it was plastic and now it’s metal, they need to update it
I made a makeshift repair with a rubber band from the paddle to the headphone cord to keeping from moving forward. It works well enough
Just tutorial didn’t help it just broke my controller more
skill issue
My lb paddle keeps activating before even pressing it down
Same how dif u fix it
@@JackTheReaper758 I haven’t yet but something probably chipped or broke inside the controller
@@ExerBtw i barly used it
@@JackTheReaper758 doesn’t matter how much u used it if u dropped it he can still break depends the angle u dropped it at how high u dropped it, it only takes one time
@@ExerBtwno bro it literally never fell down EVER
Disabled conceptor, worse gamepad ever, fuck Sony
This video is no help at all I just wanna make a button unstick this is ridiculous
and this is literally how you do that lol