CABLE REPAIR on headphones JBL Quantum 100 (How to)
Вставка
- Опубліковано 5 лют 2025
- In this video we explain how to repair the cable of wired headphones. In this case it is the JBL Quantum 100 headphones.
When one or both sides of the. headphones stop playing music, then the problem is often withe the cablecliose to the aux jack connector. The small cable tend to break at this location first.
In order to repair our cable, we remove the original jack by cutting the cable about an inch away from the jack.
Then solder the single cables onto a new audio jack. Make sure to solder the wires onto the correct ports inside of the new connector.
Thank you very much for this one! I hacve soldered headphones for 30+ years, but had never seen these with 5 cables in the plug! 😲Owing to your tutorial, I successfully repaired my daughter's headset, niiiice!
Thanks a lot, I have repaired my quantum 100, and all work, sound and microphone. 👍
Amazing saved me money from buying another set 💯
Hey Just repaired my headphones thanks to ur tutorial 😁👍
Glad to hear! Thank you for your feedback 👍
Great idea, i need to get a soldwring iron first!
Спасибо тебе большое я смог починить их когда узнал что они стали стоить 5000 :)
Great, thanks! What kind of colored cables are inside? There is no isolation to be removed before solding - as in the past?😅 The isolation is removed by the high temperature? Cheers, Ben
Late reply but yes, the soldering temp did away with the insulation - I guess you can remove it by yourself to test, that's what I always do before applying heat.
i have a question. the on/off button still working ? how about the left and right balance ? still ok ??
how to change the whole cable my cable is cut in the middle because of my cat and if I do this method the cable will be to short
I have the same issue exactlu with my JBL quantum 100, thanks for the video
i have a question. the on/off button still working ? how about your balance left and right still ok ??
@@arqcv1062I'm not sure if my headphone has any on/off button but there is a button to switch on/off the micro. The balance is ok but juste the jack connector doesn't work properly
Sure. The micro on off button still working??
@@arqcv1062 I suppose that the on/of button is working, the left/right is correct too. my problem is the common problem of the bended shape JBL quantum jack connector; It works only if you press on it
Thanks for your information 💁♀️ 👍
the cord is loose where it goes into the earpiece on mine, you can wiggle it and the other side works. Any recommendations?
I DONT HAVE A SOLDERING IRON IS THERE ANY OTHER WAY.
PLEASE RESPOND.
It is required and honestly if you want to repair things it's the minimum you should have
Do one thing take a sharp knife with Very sharp top point heat it up on the flame and use it to heat the soldering wire(mild steel) and repeat
microphone on/off working ?
i send to repair , and now the botton not working . idk it's normal , hou ?
That is why I won't buy JBL wired headphones again. Always the same problem. The wires always breaks on the same spot after half a year.