Heck yeah! That guy's job is a cake walk compared to how we gotta break down our farm tractor tires... pry bars, cheater pipes on the pry bars, sledge hammers and blocks of wood to beat around the bead of the tire, and even setting the tire down on the ground and driving my 4x4 truck up a 2x6 board that's laid on the bead of the tire and then often having to sledge around the bead!!! I just can't imagine what even the cheapest model tire machine would cost that can do these large tires :-O
Like the Pizza cutter wheel at the end. Some find these videos boring, me, I find them fascinating the ingenuity that is used to design the machine is amazing. Actually no recycling at all just tyre removal.
I did the same thing on my Corgi with a sawzall. OMG I won't do that again! I like your cutting attachments. That's what I'll make next. Nice Job!! Those negative comments? You have not done this job before! Better to been seen and not heard!
I have worked in the foam filled tire industry for over 15 years. We had to do this all with a forklift press plattern. Sawsalls The "Foam is 100% recyclable also" Cut it in chunks and put in another tire that will be foam filled. This kind of work destroyed my body. I wish to all mighty that we had a machine like this. My back has no discs left in it. The foam fill industry was made up after the MFG of these tubeless rims. A 2 piece rim is a tube type tire A 3 piece rim Has a O ring and locking flange 1 piece rims are tubeless and [need no tube] Tube repairs are far more costly then "plugging" the hole in a reg air tire.
Bet the famers and etc love this machine, saves a fortune, and reuse the foam. I can see the machine is used and used and used and used. Tires are 350 to 500$ sometimes not including the foam and set time. But the tractors and such make big money per hour. Thanks.
What a great machine, this is really interesting. Quite therapeutic to watch, too. With the tyre removed the foam filling just looked exactly like a 1950 Dinky Toy tyre!
Hell of a lot quicker than the way I used to do it. Using a knife to cut the tyre and then hack away at the foam filling, to rescue the rim. Used to take me about 30 mins for a 12.5-16.5 solid filled bobcat tyre.
Most of the commenter don't even realise, that this wheel is filled with solid rubber and can weight more than 400kg. They have already seen a bicycle tyre, so they know better everything.
I wonder why they don't use 2 piece wheels (bolted together in the center) on these? Removing the beads around the 7:00 minute mark reminded me of peter griffin driving the forklift hahaha.
Not a split rim, a two piece wheel bolts the left side to the right side, a split rim just has a split ring that keeps the bead on, two different types of rims, split rims are also extremely dangerous to mount, lots of guys have been killed by them over the years, that's why they are no longer used.
A 2 piece rim will not work that tire with foam weighs over 1000 pounds and the application of tire is for heavy duty equipment. A 2 piece rim will flex to much causing bolts and nuts to come loss . A safety ring rim or 3 piece is extremely dangerous
Seems awfully involved - and I bet wasn't cheap. When I needed new tires for my Bobcat 7753, I just used a sawzall and cut off my bald, solid rubber filled tires and they made some heapin' smoke signals on our bonfire that night! Rims cleaned up like new - then refilled again for their 2nd life!
I like machinery but I don't know what is the purpose of this job. Could you explain to me in couple of words? What people do with the result of this job? Tx!
The video shows the initial process of recycling a tire whereby removing the tread and the inner foam filler which will later be used to make other things, and now a new tire can be reinstalled onto the rim. Tire treads are often turned into small chips and then used to make things like "welcome" mats that you would lay outside of your door, but unlike what another commenter said, I personally have never heard of the foam filler being reused whereby putting them back into another tire.... although they may actually do this now, what I have experienced is after a new tire is put onto the rim, it is refilled through the valve stem with new foam. I only know this because I own a couple Cub Cadet garden tractors and a Ford 9n, 8n, and a 3600 and 2 of them have foam filler because I was frustrated with getting flats... my grandpa who owned this property before me had a very questionable knack for tossing broken bottles and used nails in the back yard :o/
Well , it's like this,they are removing the old tire and the rubber that's inside because the tire is no good anymore so what They do is clean the rim add a new valve stem mount a new tire and foam fill it .
The 40% got a whole lot ATE UP running the machine and , making the machine, maintaining the machine...But if one insisted, I would think a big ol ban saw could cut the whole friggin affair in HALF in about 30 seconds...done and DONE
I ididn't ge tthe idea of this video. So you recycle the rubber and what of the steel wire core? Why cut the tire in the first place and spend 8 minutes doing so when you can just take of the tire and replace it with the same amount or even less time spend. So taking of the layers -> for recycle? Only reason i would do that. Tho we don't even need to do it here since theres far more effective ways to do that.
Because you reuse the old rim, a new skid steer rim is over a hundred bucks, and that one was twice the size, throw a new tire on it and refill with rubber. saving probably over 200 bucks.
then change the settings to watch it in a faster speed. I just checked and youtube still has that option...just click the gear icon that's located directly under the video screen in the right hand corner. Different browsers may have it located somewhere else close to the video screen
I still have split rims on an old(1960) grain truck but most shops won't touch them today. I certainly do not blame them because even with a tire cage there's no guarantee ;-0)
Yea on a pneumatic split rim the air pressure holds the lock in place so long as it seats properly in the rim. There are bead lock rims that use a bolt-on lock ring that is much safer and I bet would great for these tires.
WTF? Just send a Person over to grab the Foam Tube. WTF? This is some serious shit!!!! LMFAO - Man, this is STUPID and I agreed with most People here !!!!
avery, you asked "what was the point of this video?" orbit replied with an obvious answer of how it's "in the title dummy" you replied to him "Orbit, the title is why I ask........point?" ...and so if you still don't get what the point of the video is even after reading the title which CLEARLY says "Foam tire recycling with Corghi tire machine" and then the video showing what the title says, then you must be one of the more clueless people.... the video CLEARLY shows the initial process of recycling a tire whereby removing the tread and the inner foam filler which will later be used to make other things, and now a new tire can be reinstalled onto the rim.
I worked hard, I mean really HARD, for hours and you outwork me in 8 minutes. My hat is off to you, Sir.
Heck yeah! That guy's job is a cake walk compared to how we gotta break down our farm tractor tires... pry bars, cheater pipes on the pry bars, sledge hammers and blocks of wood to beat around the bead of the tire, and even setting the tire down on the ground and driving my 4x4 truck up a 2x6 board that's laid on the bead of the tire and then often having to sledge around the bead!!! I just can't imagine what even the cheapest model tire machine would cost that can do these large tires :-O
Like the Pizza cutter wheel at the end. Some find these videos boring, me, I find them fascinating the ingenuity that is used to design the machine is amazing.
Actually no recycling at all just tyre removal.
Q
I did the same thing on my Corgi with a sawzall. OMG I won't do that again! I like your cutting attachments. That's what I'll make next. Nice Job!! Those negative comments? You have not done this job before! Better to been seen and not heard!
I have worked in the foam filled tire industry for over 15 years.
We had to do this all with a forklift press plattern. Sawsalls
The "Foam is 100% recyclable also"
Cut it in chunks and put in another tire that will be foam filled.
This kind of work destroyed my body.
I wish to all mighty that we had a machine like this.
My back has no discs left in it.
The foam fill industry was made up after the MFG of these tubeless rims.
A 2 piece rim is a tube type tire
A 3 piece rim Has a O ring and locking flange
1 piece rims are tubeless and [need no tube]
Tube repairs are far more costly then "plugging" the hole in a reg air tire.
cloverdale87. Hello what industries or places used the foam filled tyres. What was their advantage over air filled tyre.
Bet the famers and etc love this machine, saves a fortune, and reuse the foam. I can see the machine is used and used and used and used. Tires are 350 to 500$ sometimes not including the foam and set time. But the tractors and such make big money per hour. Thanks.
What a great machine, this is really interesting. Quite therapeutic to watch, too.
With the tyre removed the foam filling just looked exactly like a 1950 Dinky Toy tyre!
I can't believe I just spent 8 minutes of my life watching a tire spin.
Ew Dirt right
we need tire spin ten hours version
Plus 30 seconds to write your comment
Hell of a lot quicker than the way I used to do it. Using a knife to cut the tyre and then hack away at the foam filling, to rescue the rim. Used to take me about 30 mins for a 12.5-16.5 solid filled bobcat tyre.
Nice job there Ricky Nuggets, you with your knife, pistol, chain wallet, shiny blue jeans, biker mustache.
Most of the commenter don't even realise, that this wheel is filled with solid rubber and can weight more than 400kg. They have already seen a bicycle tyre, so they know better everything.
Viktor Szigeti I thought the video said it was filled with foam not rubber
I wonder why they don't use 2 piece wheels (bolted together in the center) on these? Removing the beads around the 7:00 minute mark reminded me of peter griffin driving the forklift hahaha.
Ron Garvin you mean a "split-rim"
Not a split rim, a two piece wheel bolts the left side to the right side, a split rim just has a split ring that keeps the bead on, two different types of rims, split rims are also extremely dangerous to mount, lots of guys have been killed by them over the years, that's why they are no longer used.
Micro Machine تصليح تركته
في
Micro Machine
A 2 piece rim will not work that tire with foam weighs over 1000 pounds and the application of tire is for heavy duty equipment. A 2 piece rim will flex to much causing bolts and nuts to come loss . A safety ring rim or 3 piece is extremely dangerous
Did you guys make the blades for this yourself? Great work by the way.
It last longer then being aired up you can run over rebar and it won't go flat.
Voted- The Most UN-imaginative Machine Of All Time !!!!!
А непроще сразу снять покрышку целиком. Зачем такие сложности?
Вот это дебилизм!
а для чего такая процедура
Seems awfully involved - and I bet wasn't cheap. When I needed new tires for my Bobcat 7753, I just used a sawzall and cut off my bald, solid rubber filled tires and they made some heapin' smoke signals on our bonfire that night! Rims cleaned up like new - then refilled again for their 2nd life!
I don't know what they are doing. What is the end result.
Very labor intensive process.
Vu le temps qu'il faut pour un pneu et vu le nombre de pneus qui se réforment, y a intérêt à fabriquer des machines de démontage.
What does Jerry Bentwell have to say about this operation?
awesome! that would of taken ages by hand.. imagen trying to get that off with a crowbar and flathead screwdrivers!
Guix6gl,.,hkigkivtu k c,.😹😖
Believe it or not it's faster doing it by hand. You need a sawzaw, tire bar, and a forklift
Tell me I didn't hear you whistle at a work colleague? I see no dogs.
I like machinery but I don't know what is the purpose of this job. Could you explain to me in couple of words? What people do with the result of this job?
Tx!
The tire is foam filled instead of air filled so it doesn't have flats. Once the tire is worn out the only way to get it off is to cut it off.
+Cristi C They put the foam into a new tire and mount it on the wheel...
The video shows the initial process of recycling a tire whereby removing the tread and the inner foam filler which will later be used to make other things, and now a new tire can be reinstalled onto the rim. Tire treads are often turned into small chips and then used to make things like "welcome" mats that you would lay outside of your door, but unlike what another commenter said, I personally have never heard of the foam filler being reused whereby putting them back into another tire.... although they may actually do this now, what I have experienced is after a new tire is put onto the rim, it is refilled through the valve stem with new foam. I only know this because I own a couple Cub Cadet garden tractors and a Ford 9n, 8n, and a 3600 and 2 of them have foam filler because I was frustrated with getting flats... my grandpa who owned this property before me had a very questionable knack for tossing broken bottles and used nails in the back yard :o/
Well , it's like this,they are removing the old tire and the rubber that's inside because the tire is no good anymore so what They do is clean the rim add a new valve stem mount a new tire and foam fill it .
Why not cold cap the tires ...
Sure beats a pry bar and a sledge hammer.
What a long Process for one tyre
Very cool.
Непонятен смысл этих движух, Покрышку порезать?
I can’t imagine how much it cost them to fill that enter tub with foam.
Super 🇦🇿🇹🇷🇦🇿
I have to start reading ng the comments before watching the video.
where do you get them filled and how much does cost howard county arkansas
advantagetires in chino California
where did this machine get
Sucesso. Ai no canal
Apna number sand karo
What you make at the old poly fill?
why am i watching this.
because you chose to click on and watch it ;o)
Wtja.gjp
Det var nok den mest langtrukne måde at få et dæk af.
Ya iventen una llanta, inponchable para,autos y motocicletas.
Я бы болгаркой разрезал быстрей в 2 раза и не поперек а в Доль
Сколько дисков знаешь, ушлобы пока ты поперёк только резал?
Это, похоже, не пневматическая шина. Вместо воздуха какой то компаунд
На диске штуцер-ниппель присутствует.
Хрень какая то
hell of a machine
why not just disassemble the tire?
И нахуя такие сложности, мне бы понадобилось уголок, кувалда и две мантировки
Это апарат для страдателей хуйней
What a slow process...
Nice boy
Very good
Impressive 👍🏻
Waha youTube 12 years lod video suggest me
that is the biggest waste of time and a lot of energy ever
It takes 40% more energy to make a new tire. Might as well recycle it.
Moron.
The 40% got a whole lot ATE UP running the machine and , making the machine, maintaining the machine...But if one insisted, I would think a big ol ban saw could cut the whole friggin affair in HALF in about 30 seconds...done and DONE
Doug Chaney Oh I forgot, new tires dont require machines to be made.
Fucking idiot.
Used rubber from destroyed tires cannot be used to make new tires ... the rubber can only be vulcanized once.
I use a Saws-all
I feel it would be cheaper and easier to just retread the tires
Towards the end ...
I started getting "tired".
I was tired after watching this.
É por isso q as coisas são caras😐
На фиг Я это смотрел 😂
Да не говори 😁😁😁я тоже так думаю какого хрена я посмотрел
Тоже зачем
casi amanece y aun no sacan la llanta...muy lento
You don't have to sweat going to work now,
Cut, cut, cut, after 5.5 minutes take away the tube (0.3 kg) by forklift. In a busy day this way make a nice quarter money :D
U
И в чем блять суть этого видеооооо????
i need that machine
nano ini?
this is not an inflatable tire
آموزنده
хорошо что мне так не меняют резину на машине.
Strange video....turned a 2 min job into a 8 minute job
Ser this machine give me
Fantastic thanks
Save money and time, shave and retread the tire no new foam to buy no expensive corgi machine just bring it to a retread outfit
I ididn't ge tthe idea of this video. So you recycle the rubber and what of the steel wire core? Why cut the tire in the first place and spend 8 minutes doing so when you can just take of the tire and replace it with the same amount or even less time spend. So taking of the layers -> for recycle? Only reason i would do that. Tho we don't even need to do it here since theres far more effective ways to do that.
Because you reuse the old rim, a new skid steer rim is over a hundred bucks, and that one was twice the size, throw a new tire on it and refill with rubber. saving probably over 200 bucks.
Nice but too slow
then change the settings to watch it in a faster speed. I just checked and youtube still has that option...just click the gear icon that's located directly under the video screen in the right hand corner. Different browsers may have it located somewhere else close to the video screen
Yeah why not pass a law that that they HAVE manufacture these rims as TWO PIECE...what a big DUHHHH! no?
Doug Chaney it's called a "split-rim"
And the locking ring of the split rims took so many a tire changers life, that they dumped that idea.
2Truth4Liberty yep it would take ya head clean off if wasn't done right
I still have split rims on an old(1960) grain truck but most shops won't touch them today. I certainly do not blame them because even with a tire cage there's no guarantee ;-0)
Yea on a pneumatic split rim the air pressure holds the lock in place so long as it seats properly in the rim. There are bead lock rims that use a bolt-on lock ring that is much safer and I bet would great for these tires.
До чего обленился народ
How is this profitable ???
Sir,Know more information in
whatsapp:+86 15107149073
tired
Lots of work for scrap rubber. I suspect that this process does not make viable economic sense.
So what Now.you put on a new tire with the foam back in.
اكل خرة
Very pad
and ?
Why would you put garbage on you tube
cheaper to take the trire to the dump
Whatsapp me:+86 15107149073
Es vien
What is the point of this video?
ακόμα κι αν σας κατάλαβα καλά
I have to recycle some foam filled tires.
Please contact me at 763-420-2100 I will help you with that.
Shawn J Leuer Westside Tire
So slow , who build this michine so slow for one tyre.
Bought a heavy duty wheel lately? $$$!
Machines
WTF? Just send a Person over to grab the Foam Tube. WTF? This is some serious shit!!!! LMFAO - Man, this is STUPID and I agreed with most People here !!!!
That "foam tube" weights about 600 lbs. Not going to just grab that and walk away with it.
C
I think I could have done that with a pair of fingernail clippers in that amount of time....
Sir,Know more information in
whatsapp:+86 15107149073
what was point of this video?
In the title dummy
Orbit , the title is why i ask ........point?
avery gentry they're demounting a foam filled tyre so the rim can be reused
avery,
you asked "what was the point of this video?"
orbit replied with an obvious answer of how it's "in the title dummy"
you replied to him "Orbit, the title is why I ask........point?"
...and so if you still don't get what the point of the video is even after reading the title which CLEARLY says "Foam tire recycling with Corghi tire machine" and then the video showing what the title says, then you must be one of the more clueless people.... the video CLEARLY shows the initial process of recycling a tire whereby removing the tread and the inner foam filler which will later be used to make other things, and now a new tire can be reinstalled onto the rim.
Postmatom
zafar bux .
What a joke. Process does not work
holy hell what a time consuming process.
ى ر ل
Apna number sand karo
I'm faster when I'm doing it the right way
It's a "to stupid to watch" video
gotta be something faster
Tyre ki cutting kahan sele Karen
Plz send party contact no.
Sir,Know more information in
whatsapp:+86 15107149073
😂😂😂😂😂😂😂
اهقنقغهصغصص ياسر العمر