Loved it. Thank you! My current bench rifle is an Anschutz 22lr target made in 1986. Has match 56 and I use weaver T36 scope. I shoot Bench in Australia. 18:22 😊
At about five minutes in uou say that you have to match the ammo to the barrel, that is more or less correct. However you can use a barrel tuner to tighten up those 22lr groups
Hallo Gerard. Thnx voor je toffe filmpje en uitleg. On 4:51 What is the name of brand of that velocity meter on te barrel? Ga zo door met zulke filmpjes/keep up the good worm!
I have a gopro 9 black i want to set it in side shot cam Do I have to change the lans in it? Or will the factory run in lans ? Please reply waiting your response.
Hi Gerhard! We are your fan and expecting a new video from FX Pantera! Do you made any ? All of your friend and competitor already made one. We except one from you. When can I see and hear your oppinion about it?
That's not a legal .22lr benchrest set up in the UK for the competition rules here. Nothing can guide the fore stock in the tripod, it has to have at least an inch of clearance either side of the widest part of the fore stock. Also rear bags are not allowed in the rules, the rifle has to be supported by the shoulder, with no contact with the bench. I use a 1963 Anschutz 1413, with a 3" wide Anschutz DIN Rail bench block, Vector Optics 12-60x60, a bespoke barrel tuner, the stock has an adjustable benchrest shoulder fitted to the Butt, and I use Centre-X out to 100 yards (although the range I use is 100 metres), but also shoot 50 metres, and 25 yards. I have a modified Caldwell Tripod with a completely flat surface and the required 1 inch of clearance either side of the bench block. I've only ever shot competition under the above rules, and initially thought you were cheating with that set up, since it looked very much like you could load a round and pull the trigger with a string from the back of the firing point, and that would make the competition all about spending the most money to get the best score, rather than the skillset of the shooter. I honestly bought this rifle for £125, the bench block was £40, the barrel tuner £90, the Scope £400, and the adjustable shoulder butt was about £100, so I prefer the rules here I think. Interesting video though.
SALUDOS AMIGOS ESPERANDO TUS VIDEO MUY MUY BUENOS LOS RIFLES QUE PRESENTAN ME ENCANTAN ESOS RIFLES PCP LAS TIMA QUR AQUI EN NICARAGUA NO HAY MADA DE ESOS ESTILOS DE RIFLE FELIZIDADES HERMANO Y VENDICIONES
More information to follow on the gun setups. 🤓
Loved it. Thank you! My current bench rifle is an Anschutz 22lr target made in 1986. Has match 56 and I use weaver T36 scope. I shoot Bench in Australia. 18:22 😊
Yes, more info on .22lr types. That would be awesome.
Not sure if they export but for the cz 455 in the oryx chassis take a look at anarchy outdoors for magazine extentions etc...
great and very informative video Gerhard!
Where did you get the Weaver fixed power scope
Nice video as always 👌🏻and your bench rifle barrel....😁my guess...Muller or shilen
Well done I liked this weapon
How do you clean the atec wave? It doesn't come apart.
At about five minutes in uou say that you have to match the ammo to the barrel, that is more or less correct. However you can use a barrel tuner to tighten up those 22lr groups
Nice setup. Would be good to know what the full setup is for the last rifle
what would be a good ballistic calculator for scope turret adjustments
Hallo Gerard. Thnx voor je toffe filmpje en uitleg. On 4:51 What is the name of brand of that velocity meter on te barrel? Ga zo door met zulke filmpjes/keep up the good worm!
Thank u👍
Please make a video of how you tune your FX impact M3😮
Like your video. Where can I buy the chronograph you used on this video?
I have a gopro 9 black i want to set it in side shot cam Do I have to change the lans in it? Or will the factory run in lans ? Please reply waiting your response.
Hi Gerhard! We are your fan and expecting a new video from FX Pantera! Do you made any ? All of your friend and competitor already made one. We except one from you. When can I see and hear your oppinion about it?
@18:16...hahahaha
Very interesting even if I didn't understand everything well because I don't know English well..
Time for a new video 👍😉
Mamtap kawan
👍👍
That's not a legal .22lr benchrest set up in the UK for the competition rules here.
Nothing can guide the fore stock in the tripod, it has to have at least an inch of clearance either side of the widest part of the fore stock. Also rear bags are not allowed in the rules, the rifle has to be supported by the shoulder, with no contact with the bench.
I use a 1963 Anschutz 1413, with a 3" wide Anschutz DIN Rail bench block, Vector Optics 12-60x60, a bespoke barrel tuner, the stock has an adjustable benchrest shoulder fitted to the Butt, and I use Centre-X out to 100 yards (although the range I use is 100 metres), but also shoot 50 metres, and 25 yards. I have a modified Caldwell Tripod with a completely flat surface and the required 1 inch of clearance either side of the bench block.
I've only ever shot competition under the above rules, and initially thought you were cheating with that set up, since it looked very much like you could load a round and pull the trigger with a string from the back of the firing point, and that would make the competition all about spending the most money to get the best score, rather than the skillset of the shooter.
I honestly bought this rifle for £125, the bench block was £40, the barrel tuner £90, the Scope £400, and the adjustable shoulder butt was about £100, so I prefer the rules here I think.
Interesting video though.
SALUDOS AMIGOS ESPERANDO TUS VIDEO MUY MUY BUENOS LOS RIFLES QUE PRESENTAN ME ENCANTAN ESOS RIFLES PCP LAS TIMA QUR AQUI EN NICARAGUA NO HAY MADA DE ESOS ESTILOS DE RIFLE FELIZIDADES HERMANO Y VENDICIONES
No shooting 😔
Accent is hard to decipher
Hi I’m interested in a rifle but a good rifle for hunting with camera on the sight if you can help me let me know thank you