You are the best !!! I have been trying to find how to cut stickers on my M1 for some time now and you have done it !! Thank you soooo much !! I am following you !!
It's the second time I get one of your vids recommended to me by YT. Another great one for sure! I just got an M1 and I am still experimenting a lot with it. Anyway, the white sticker paper is on its way from Amazon... Speaking of it, haved you considered adding some Amazon affiliate links as well? I could only find affiliate links for the illustrations.
Did you manage to get an official xTool sticker paper? I've taken a look and they don't seem to sell it outside of their bundle pack. If you bought another brand, just be aware that the paper may have a slightly different thickness so you may need to test first before committing to a big cut. And yes, we will definitely add Amazon links that are relevant. The only reason we didn't link to the sticker paper is because we couldn't find the xTool brand and we didn't want to recommend a sticker paper that we haven't tried yet.
I think we answered you on our other channel but will just repeat it here in case you didn’t see it. I don’t think you will be able to cut around stickers you have already printed because you require registration marks to be printed on the paper so the machine knows where to cut. You could ask the company directly however. They may have a better answer.
We used the default settings which creates a kiss-cut. We haven't tried cutting right through which means I don't have exact settings for you. I would think that the cut pressure setting would need to be increased slightly. It would mean doing some small tests and increasing the pressure each time until you get the cut you desire. You could contact xTool directly and see if they a setting that you could use. (And by the way, we also received your question on our Alanda Craft channel so we will add this same response to there as it may help others as well.)
Did you use the default setting on the pressure/speed for the cut? Mine cut clean through the first attempt and the 2nd was better but still went all the way through in a few spots.
We haven't tried cutting 120lb card stock with the xTool M1. I feel like it would cut that thickness BUT you really should check first with xTool directly. They would have tested on a variety of products and will be able to let you know if it will work.
Sounds like your machine might be out of alignment. The crosses in the corners on the sticker sheet are registration marks which tells the machine where to cut so it should work close to accurate. The only suggestion I have is to give the camera lens a clean. It could have dust on it. Otherwise, you might want to contact xTool directly and see if they have any ideas.
I love how how your lessons are short and one at a time. Thank you very much for sharing your knowledge
Thank you! I prefer tutorials that are short and to the point myself so want to make the same for this channel.
You are the best !!! I have been trying to find how to cut stickers on my M1 for some time now and you have done it !! Thank you soooo much !! I am following you !!
Awesome! Thank you! Glad I could help.
Oh, this is great, it is like the silhouette registration marks
Yes, exactly. We have the ScanNCut and it does the same.
Thank you! Just got my M1 yesterday! Gonna get some sticker paper today!
Excellent, I hope you love it as much as we love ours. It does such a great job with stickers.
Very talented lady, thank you made it look so easy to someone who uses a hammer for erverything 🙂
Thank you! 😊
It's the second time I get one of your vids recommended to me by YT. Another great one for sure! I just got an M1 and I am still experimenting a lot with it. Anyway, the white sticker paper is on its way from Amazon... Speaking of it, haved you considered adding some Amazon affiliate links as well? I could only find affiliate links for the illustrations.
Did you manage to get an official xTool sticker paper? I've taken a look and they don't seem to sell it outside of their bundle pack. If you bought another brand, just be aware that the paper may have a slightly different thickness so you may need to test first before committing to a big cut. And yes, we will definitely add Amazon links that are relevant. The only reason we didn't link to the sticker paper is because we couldn't find the xTool brand and we didn't want to recommend a sticker paper that we haven't tried yet.
Does anyone have a problem when it cuts out the sticker and the cut is in the wrong place on some areas
Try cleaning the lens of the camera. If that doesn't work then I would contact xTool directly.
Hi, please could you tell me, do you know if I can use the machine to cut out my printed images that I have already printed? Thank you.
I think we answered you on our other channel but will just repeat it here in case you didn’t see it. I don’t think you will be able to cut around stickers you have already printed because you require registration marks to be printed on the paper so the machine knows where to cut. You could ask the company directly however. They may have a better answer.
What would be the settings to have the stickers completely cut out like die cut stickers
We used the default settings which creates a kiss-cut. We haven't tried cutting right through which means I don't have exact settings for you. I would think that the cut pressure setting would need to be increased slightly. It would mean doing some small tests and increasing the pressure each time until you get the cut you desire. You could contact xTool directly and see if they a setting that you could use. (And by the way, we also received your question on our Alanda Craft channel so we will add this same response to there as it may help others as well.)
Did you use the default setting on the pressure/speed for the cut? Mine cut clean through the first attempt and the 2nd was better but still went all the way through in a few spots.
We have all the settings used for this on our website. Here's the direct link: golasergo.com/cut-stickers-xtool-m1/
Thank you!
Hello, do you cut cardstock 120lb?
We haven't tried cutting 120lb card stock with the xTool M1. I feel like it would cut that thickness BUT you really should check first with xTool directly. They would have tested on a variety of products and will be able to let you know if it will work.
Please what kind of printing did you use, like inkjet lazer or uv
This was an Inkjet Printer - Canon G6065.
@@golasergo ok thanks
Hi please tell us llightburn cut and print version
I'll add it to the list.
Please buy a siluette portrait 3 :)) @@golasergo
i handled print and cut made stickers its awesome@@golasergo
Is there a trick to get the stickers to cut where it should? Mine always seem to be a little off
Sounds like your machine might be out of alignment. The crosses in the corners on the sticker sheet are registration marks which tells the machine where to cut so it should work close to accurate. The only suggestion I have is to give the camera lens a clean. It could have dust on it. Otherwise, you might want to contact xTool directly and see if they have any ideas.
What degree blade did you use?
We used a 45 degree blade.
Do you need to put the protective sheet back on the mat when done or is it meant to be thrown away? Thanks!
Always keep your protective sheets. They protect the mat and keep the dust and grime off.
@@golasergo Thanks!