Awesome to hear!!! I guess at the end of the day, the plates are on the way out, but with decent fluid and proper operation of that cluth lever, they will keep going for while.
I used sand blasting on my FZ6 and i entirely lost my clutch, the disk were so grabby that it doesnt slip at all, and they eat my clutch fibers in about half an hour. I thinkg you should stick to sand paper or a less abrassive as possible medium, you just want to take out the brightness. I ended up changing the disks and the fibers altogether to fix the sandblasting damage.
@@cyberkiller83 The act of irreversibly going all out in some act regardless of consequences. Sand blasting discs instead of using fine grit sandpaper on a flat surface. You got rid of the glazed spots but ended up going to far.
@@aaron___6014 yes you are right, in fact i ended up with steel discs that looked more like grinding dics, so naturally they eat the clutch discs like butter. I will try do the opossite, like polishing. I am doiing this experiments because i have a autoclutch, so i want to see what is the combination that gaves me the best performance.
david get some hylomar m its a form of rtv made by rolls royce it is the best gasket maker and really good for leaky bimmers it is water fuel and oil resistant and sensor safe and it is sold in australia cheers glenn
@@thechosenkiwi7871 improper use could kill a clutch in 30 seconds. So it’s possible it’s worn. Could have the wrong oil in it? Heaps things could have finished it already. When we used race, lucky to get an hour from a clutch.
Lovely Video! My gear shifting on 2019 Suzuki V-Strom 250 becomes very hard after about 15 minutes of riding. You think I need clutch plates after 8000 miles?
nice video. i put an different brand in the bike and started slipping, i am planning just to replace the to a better one as Motul mineral oil JASO MA2, as i know the the JASO MA2 helps to avoid that. what are your thoughts? THANKS
thanks lot for the expeeiences-hendrix scale u still got zxr250*ha?Nice but i git Z900(its 2017 model released after 45 yrs of Z900 anniversary of Z900 model are.
Hell yeah finally more bikes pls would love to see some bike reviews maybe some bike dragy runs? These slow cars are getting old 😉😂 Let me know when your down in Brisbane lads let’s go for a ride
We had to get rid of all that equipment when we moved out of the shed last year. It sucks, so much of that gear would be immensely helpful with all the stuff we've been doing lately haha
I have a Suzuki gsf1200 bandit and it quit pulling I think my clutch went out but really don't know if anyone could help others opinions would be gratefully appreciated
Hey buddy, just got a 99 bandit and my clutch is fucked, let me know if you get it figured out? I’ve been trying to research so I can order a kit and replace but oof
Man thanks, I still got a lil slip but u was on point
Nice fix 👍🏻 more variation in content as well, you guys are hard workers!
Thanks John!
Super interesting!!!!! Well done👍✊
Mine hydrologic clutch when i kick down doesn't go into gear , just making like a rattling sound do you think the lever has come loose?
"in a change to our regular broadcast......bikes" Yes lads it's about time 🔥🔥🔥
Well in that case, there will be more to come!
You Just safe me money. this was my probleme in my 2014 r1 is solved. i Almost order a new clutche. Big thanks from belgium 🙏🙏
Awesome to hear!!! I guess at the end of the day, the plates are on the way out, but with decent fluid and proper operation of that cluth lever, they will keep going for while.
howd it turn out?
I used sand blasting on my FZ6 and i entirely lost my clutch, the disk were so grabby that it doesnt slip at all, and they eat my clutch fibers in about half an hour. I thinkg you should stick to sand paper or a less abrassive as possible medium, you just want to take out the brightness.
I ended up changing the disks and the fibers altogether to fix the sandblasting damage.
you sand blasted the metal discs, full send!
@@aaron___6014 Full send?
@@cyberkiller83 The act of irreversibly going all out in some act regardless of consequences. Sand blasting discs instead of using fine grit sandpaper on a flat surface. You got rid of the glazed spots but ended up going to far.
@@aaron___6014 yes you are right, in fact i ended up with steel discs that looked more like grinding dics, so naturally they eat the clutch discs like butter.
I will try do the opossite, like polishing.
I am doiing this experiments because i have a autoclutch, so i want to see what is the combination that gaves me the best performance.
I've always thought that might work. Thanks for the confirmation.
Any time!
nice touch,save money than only changing brandnew 1
so when the clutch slipped under high RPM, did the engine feel like it was shaking harder then normal?
Is that a slipper/grabber clutch? I never heard of two steels in a row? Seems like that would be asking for slipping.
david get some hylomar m its a form of rtv made by rolls royce it is the best gasket maker and really good for leaky bimmers it is water fuel and oil resistant and sensor safe and it is sold in australia cheers glenn
The spring plate have torque.. u need close them not to tight and not to loose. U need do it with torque tool. Not by feel of the hand.
My bike is new and the clutch is jumpy as I let it out in first gear.
Any idea ?
Could be a clutch break in issue. If it’s new, might be worth speaking to the dealsr
Maaaaate how do you kneel like that for so long I'd never be able to stand up again... ever!!! 🤣🤣 cool change of scenery though 👍
Just had to start drinking WD40 😂
I'm looking at a bike and the guy says that he had to pop the clutch to start it up how do I fix it
look at alternate methods for turning the engine over. Kick start or Starter motor.
My brand new ninja 400 is doing this. I have free play in the lever and it still occasionally does it
Sounds like your clutch is on the way out. Any chance its under warranty?
@@ZeroTo60Tube it has 720 miles theres no way the clutch has already burned out. it only started slipping about 50 miles ago
@@thechosenkiwi7871 improper use could kill a clutch in 30 seconds. So it’s possible it’s worn. Could have the wrong oil in it? Heaps things could have finished it already. When we used race, lucky to get an hour from a clutch.
Bought a ninja 400 also, 1900 miles and the clutch is slipping on mine. Dunno what to do
@@JakeBlake00 getting the stiffer springs and adjusting the clutch cable to leave a little more play got rid of the issue
Lovely Video! My gear shifting on 2019 Suzuki V-Strom 250 becomes very hard after about 15 minutes of riding. You think I need clutch plates after 8000 miles?
nice video. i put an different brand in the bike and started slipping, i am planning just to replace the to a better one as Motul mineral oil JASO MA2, as i know the the JASO MA2 helps to avoid that. what are your thoughts? THANKS
Yesss love bikesss keep it up!!!
thanks lot for the expeeiences-hendrix scale
u still got zxr250*ha?Nice
but i git Z900(its 2017 model released after 45 yrs of Z900 anniversary of Z900 model are.
My Suzuki Burgman 650 recently started vibrating too much. The wet clutch being the culprit
Guaranteed these were not an OEM clutch kit. These ebay ones will fuck up constantly, even after sanding.
I love the bike content
Thanks,I was tearing my hair out .
Hell yeah finally more bikes pls would love to see some bike reviews maybe some bike dragy runs? These slow cars are getting old 😉😂
Let me know when your down in Brisbane lads let’s go for a ride
whats the problem if the clutch slips when i put on high rpm.? I replaced the clutch lining but still slipping.
Is the lever adjusted properly.
my r3 is slipping ( i assume ) when full throttle. engine just revs super high with no power, do you know how i could fix this?
How much did your bike run before this happened?
Nice to have something other than BMW's
Hi, do you have a link for disk for a dct gearbox of 335i , I’d like to fix it
Unfortunately we havent done anything with replacing them on the DCTs
Yeeeeah Dave. Bike sounds 👌👌👌
👍👍👍👍👍
I thoughts you guys had a sand blaster like thing... The one that Woody came to look at?
We had to get rid of all that equipment when we moved out of the shed last year. It sucks, so much of that gear would be immensely helpful with all the stuff we've been doing lately haha
I have a Suzuki gsf1200 bandit and it quit pulling I think my clutch went out but really don't know if anyone could help others opinions would be gratefully appreciated
Hey buddy, just got a 99 bandit and my clutch is fucked, let me know if you get it figured out?
I’ve been trying to research so I can order a kit and replace but oof
@@VoltageFire I figured it out
@@christophertoppings5270soltuion??? Working??
Very cool video
Glad you enjoyed it
Number 1!
🥇🏆
i can settle mya rr ninja 2 strokes n Z9 supernaked slippery now or when needed
I wish i had my draggy when i owned my ZX14......truely is a shame ha ha
Hey mate do you use a torque wrench when you're tightening the clutch springs or just go by feel?
just by feel
@@ZeroTo60Tube Perfect thank you for responding mate