Link to UGreen USB 3.0 Cable : www.shorturl.at/empzJ Note: you can change between game categories (on Usagi and Kriss) by pressing the OPTIONS button on your cabinet! Facebook Groups: Neo Geo Hacks: www.shorturl.at/esAO2 The Neo Geo MVSX Fan Page: www.shorturl.at/tyDU7 Neo Geo Cabs & MVS Collectors: www.shorturl.at/yGIOS Neo Geo MVSX Official: www.shorturl.at/pzEU1
Great clear and concise video. I would add that none of this hacking harms built in onboard MVSX system and can be easily undone by resetting to Factory Defaults. And that accidentally running this option will undo all previous hacking quickly so all steps will have to be done again from scratch to get it to where it was. Been there, done that and back again :D
Yup! I just wanted to make a simple video for new MVSX user, so they can get started right away without the hassle. You can't brick the MVSX in any way with these OS'es and ROMS.
I'm kind of confused. So I can't put everything onto one flash drive??? ... I currently have HyloX, but I wanted to add the Omega and some genesis ganes.
I am not too technically adept so had a few newbie questions on the USB stick. Could the increased graphics in games such as Street Fighter Third Strike cause the original board to overheat? If I wanted to dedicate this to only Neo Geo only games could I just delete the other ROMs on the USB stick? Thanks!
It would not, as the program running the ROM has failed in protection running across while the game runs. There is a method of deleting specific roms, but you need to manage the text file and delete the roms carefully.
That is a personal choice i guess. The only thing a Pi4 will do for you, is replace that mobo and show the Pi on the LCD panel. I reckon you have to also provide a USB input for the buttons and sticks to the Pi. I want to keep this cabinet as non-bloated as possible, so i'm good with the packs. Personally, if i want to have a Pi4 running on this cabinet, i would've built a Pi4 cabinet instead of buying the MVSX.
@@fistbumpbros My MVSX is in bits at the moment. I installed an X-Arcade encoder, so it is switchable between RPI4 (batocera) and console (Dreamcast currently) via adapters. (Dreamcast is also going through TORO and Framemister, so it look and runs great). It works very well, but it’s a big job to get it looking as if it’s stock original. Im hoping to get it all fired up with one on/off button. As that is what I liked about the original MVSX. I’ve installed shelves in the stand, but will need to drill holes in the back for cabling, and make my own controller wiring harness. I’m starting to think it’s not worth it….. or beyond my skill level. The concept does work though.
Demon Front is overall slow due to the limits of the mobo. Adding the new cable is a must, even on the latest cabinet. From what I've read in the FB groups, Unico never changed the slow cable even on newer cabs.
Just changed it . Don’t notice the games any faster but I guess it might speed up the loading maybe and make it more stable I’m assuming .was easy anyway ta
The USB cable didn't work for me. I bought the same one in the video. Really sucks because it is very unstable. I will try plugging the USB stick directly into the unit and bypass the back connection.
Weird. I heard that there are two versions of the MVSX cabinet. One is a flawed version, so people are sending it back (also has problems with the LCD screen) so that might be it. Should just work. Let me know if inserting right into the mobo works better.
hi have the Kriss_Pack3'plusAlpha2Turbo. but in the readme i see ( To use this pack, you must first have installed Pack 1 and Pack 2 on your MVSX. ) i can't find pack 1 and 2 🙄
@@AluccardX I'd choose Usagi instead of OMEGA. Usagi has the original MVSX games + the rest of the NEO GEO catalogue, Classic Arcade games and the Megadrive set. OMEGA only has the advantage of having better scanlines.
Hello friend, I have Omega and in game selection you can choose from M to Z but then you can't go back, it's a failure or it's normal, if I restart it's fine again thank you
Link to UGreen USB 3.0 Cable : www.shorturl.at/empzJ
Note: you can change between game categories (on Usagi and Kriss) by pressing the OPTIONS button on your cabinet!
Facebook Groups:
Neo Geo Hacks: www.shorturl.at/esAO2
The Neo Geo MVSX Fan Page: www.shorturl.at/tyDU7
Neo Geo Cabs & MVS Collectors: www.shorturl.at/yGIOS
Neo Geo MVSX Official: www.shorturl.at/pzEU1
Can any one direct me on how to get the mega drive🙏🏽
Install Usagi and go to options to select the MD games.
How do u instal it tho
@@triggnastyflats I suggest watching the video again, I explain it in detail
Can you please post a new link to purchase the cable?
Great clear and concise video. I would add that none of this hacking harms built in onboard MVSX system and can be easily undone by resetting to Factory Defaults. And that accidentally running this option will undo all previous hacking quickly so all steps will have to be done again from scratch to get it to where it was. Been there, done that and back again :D
Yup! I just wanted to make a simple video for new MVSX user, so they can get started right away without the hassle. You can't brick the MVSX in any way with these OS'es and ROMS.
I'm kind of confused. So I can't put everything onto one flash drive??? ... I currently have HyloX, but I wanted to add the Omega and some genesis ganes.
Nope. Each OS has to be on a seperate drive.
Can you do an update vid installing Usagi3 Unitedv2?
I am thinking about it, i need to finish another video first and then dive into this 👊
Hello, does the USB port on the screen is in 3.0, more ? or less ? THX
It's a 3.0 port, but Unico provided a 2.0 cable in there. Maybe a cost issue thing.
Great video, thanks!
No problem, hope it helped!
Hi,
What is the game your playing at 6:50 timestamp?
Great video!
Thanks
Hi, it's called Demon Front!
I seem to be having random issues where sometimes the game just goes black and freezes, this is both plugged in directly and using a usb 3.0 cable.
Might wanna check and re-softmod the cabinet again, looks like a corrupted file problem.
I am not too technically adept so had a few newbie questions on the USB stick. Could the increased graphics in games such as Street Fighter Third Strike cause the original board to overheat? If I wanted to dedicate this to only Neo Geo only games could I just delete the other ROMs on the USB stick? Thanks!
It would not, as the program running the ROM has failed in protection running across while the game runs. There is a method of deleting specific roms, but you need to manage the text file and delete the roms carefully.
Do you prefer HyloX or Omega for playing Neo Geo on the MVSX?
Usagi all the way. It has the original games + more, Genesis games and Arcade Classics.
Do you recommend these MVSX packs over installing a Raspberry Pi4 with Batocera ?
That is a personal choice i guess. The only thing a Pi4 will do for you, is replace that mobo and show the Pi on the LCD panel. I reckon you have to also provide a USB input for the buttons and sticks to the Pi. I want to keep this cabinet as non-bloated as possible, so i'm good with the packs. Personally, if i want to have a Pi4 running on this cabinet, i would've built a Pi4 cabinet instead of buying the MVSX.
@@fistbumpbros My MVSX is in bits at the moment.
I installed an X-Arcade encoder, so it is switchable between RPI4 (batocera) and console (Dreamcast currently) via adapters.
(Dreamcast is also going through TORO and Framemister, so it look and runs great).
It works very well, but it’s a big job to get it looking as if it’s stock original.
Im hoping to get it all fired up with one on/off button.
As that is what I liked about the original MVSX.
I’ve installed shelves in the stand, but will need to drill holes in the back for cabling, and make my own controller wiring harness.
I’m starting to think it’s not worth it….. or beyond my skill level.
The concept does work though.
@@Umtree well it seems you are doing a great job already. Keep going man, and show off your work in those FB groups, highly interested!
If I have the latest mvsx cabinet will adding a new 3.0 cable be of benefit? Demon front for example has a bit of slowdown in parts
Demon Front is overall slow due to the limits of the mobo. Adding the new cable is a must, even on the latest cabinet. From what I've read in the FB groups, Unico never changed the slow cable even on newer cabs.
Thanks for replying :) I’ll add it now then thanks so much
@@andrewmaxwell7831 yes, no problem!
Just changed it . Don’t notice the games any faster but I guess it might speed up the loading maybe and make it more stable I’m assuming .was easy anyway ta
@@andrewmaxwell7831 Yes, loads will be faster and more stable. The used cable was a 2.0.
The USB cable didn't work for me. I bought the same one in the video. Really sucks because it is very unstable. I will try plugging the USB stick directly into the unit and bypass the back connection.
Weird. I heard that there are two versions of the MVSX cabinet. One is a flawed version, so people are sending it back (also has problems with the LCD screen) so that might be it. Should just work. Let me know if inserting right into the mobo works better.
hi have the Kriss_Pack3'plusAlpha2Turbo. but in the readme i see ( To use this pack, you must first have installed Pack 1 and Pack 2 on your MVSX. ) i can't find pack 1 and 2 🙄
They're in the Telegram group, just scroll a bit back, closely 👍
@@fistbumpbros Thank you. The group is Hylostach 2.0 ? if yes, is search pack 1 and 2 but, anything
Yes. It's a bit cluttered, but its there somewhere.
How do u get mk3 working? It was sluggish
Works fine here. I did replace the USB cable though.
What is the game you're playing at 5:35?
Wow, uh. I have to look that up again. There's so many shmups on those packages, hah.
@@fistbumpbros I have an MVSX, the original Hylohack, and the tool to add more games. Are there any 'must play' games you'd suggest adding to it?
Personal preference of course, but I like the games on the Usagi pack the best.
how do we add xeno crisis on hylostick? and the smash tv game etc..
Xeno Crisis is on Usagi, Smash TV as well if you switch to the Megadrive section (also Usagi)
@@fistbumpbros tanks you mister
@@merubin_t2278 no problem!
how to download usagi ? Please
@@merubin_t2278 visit those Facebook groups I talk about in the video 👍
Yesterday I installed hylox hack with pixel scanlines it looks horrible
Yea it's basically the same image options as the original MVSX OS. The only OS that has a better built in image options setting is OMEGA.
thanks I will join the group and download Omega
Random question but what is the game at 6:45? It looks like Metal Slug but the girl has pink hair and a floating bunny.
That's Demon Front! A lot of people ask about that game. It's like Metal Slug and just as cool!
@@fistbumpbros Awesome thanks!
@@AluccardX i think its on the Usagi pack!
@@fistbumpbros thanks. I installed omega last night and I love it. I haven’t looked into usagi yet.
@@AluccardX I'd choose Usagi instead of OMEGA. Usagi has the original MVSX games + the rest of the NEO GEO catalogue, Classic Arcade games and the Megadrive set. OMEGA only has the advantage of having better scanlines.
where can I get USAGI other than from telegram?
It's the only place I'm afraid. You could try Archive.org
where is the video of replacing the control panel with the correct 4 button joystick and raising the panel so your hand dont get smashed in the sides
ua-cam.com/video/VVgj9GaN0U8/v-deo.html
Hello friend, I have Omega and in game selection you can choose from M to Z but then you can't go back, it's a failure or it's normal, if I restart it's fine again thank you
You mean flipping between game titles that start with M till the end? (Z)
Yes friend when you are in Zupapa and you want to go back to 3 count bout, only the titles change not the covers, the restart is normal, thank you
Did you replace the USB 2.0 cable with a newer 3.0 one? Seems like the titles aren't loaded fast enough from the USB drive.
Okkk friend no, I haven't changed it ok I'll buy 1 thanks for everything
Yep, change that and it'll be alright!