The blown up version of the wiring diagram is great. I actually had my local printer shop do the same for me and laminate it so I could write on it with a dry eraser marker.
I love my Sniper system but It gets under my skin that you pay four figures for an EFI system and have to pay an additional $60 for a cable which is, IMO, a necessary component for proper tuning.
I agree. My second disappointment was not including an alternator control wire as part of the harness on the LSx type engines so you aren't almost finished wiring the car and suddenly realize your alternator is sitting there looking lonely. Even worse, the tune cable and splitter were out of stock for months when I bought my setup.
Thank you for plugging Monkey Fab Wiring diagram now that I'm FINISHED with my harness!!!! Seriously folks, if you have decided to cut up or ditch the crappy Holley harness completely that wiring diagram is going to be greatly beneficial!!
The very first video I watched from you was your take on the old Tuner Nerd Knock Monitor Pro! I bought it immediately and only used one time because of the hassle of having to set up the laptop like you mentioned. This V4 sounds awesome.
Thanks for your content, Joe. No BS 5 minute intros and blabbin, just excellent info!!! I remember you from the honda tech days and recognize that YOU ARE THE GURU!!! Keep up the great work! Do you have any merch to sell so I can support your channel? Rob
Question.. The optional Holley bluetooth module thingamuhjig ..... Does this it make it possible to velcro a $100 12" walmart tablet to my OSB homemade console and have a complete custom gauge layout?.....
Yea that’s the biggest benefit of a video based course like this. It’s too much information to just remember the first go around. You can go back and watch whatever it is you need when you need it.
That 5” screen doesn’t log, does it? It can play back a log via sd card but last I knew only the pro dash could log. Website description doesn’t say anything about logging either. Hope I’m wrong though!
The blown up version of the wiring diagram is great. I actually had my local printer shop do the same for me and laminate it so I could write on it with a dry eraser marker.
4:13 "If you see any wire nuts, you should probably consider divorce..." 😂😂😂 You're an absolute trip Brother!!!
Big ups to Matt at Sloppy, and his power tap/dial-a-boost harness. Definitely worth the money.
Awesome vid...have used items from Sloppy and Monkey and am a part of the TTT school. Happy to be a part of the group.
I love my Sniper system but It gets under my skin that you pay four figures for an EFI system and have to pay an additional $60 for a cable which is, IMO, a necessary component for proper tuning.
It 100% should be included
I agree. My second disappointment was not including an alternator control wire as part of the harness on the LSx type engines so you aren't almost finished wiring the car and suddenly realize your alternator is sitting there looking lonely. Even worse, the tune cable and splitter were out of stock for months when I bought my setup.
The cable should have ben included unless you purchased it used.
@@StrongForceRacing bought it new. The data cable (which connects to the hand-held screen) is included. The PC cable is not.
@@ML-dl1cp I just bought a new sniper kit not 6 months ago and the data cable to plug into the computer was included.
That knock monitor looks really cool. I'm learning to tune in your course so that may be really helpful with my car
Thank you for plugging Monkey Fab Wiring diagram now that I'm FINISHED with my harness!!!!
Seriously folks, if you have decided to cut up or ditch the crappy Holley harness completely that wiring diagram is going to be greatly beneficial!!
Well worth the $. Joe has done a great job.
Man that "new light" test made me spit my beer out 🤣🤣🤣
The very first video I watched from you was your take on the old Tuner Nerd Knock Monitor Pro! I bought it immediately and only used one time because of the hassle of having to set up the laptop like you mentioned. This V4 sounds awesome.
My wire nuts have gone 10s in my daily driver, thank you.
Get the TTT course- so much info- I am going through it for the second time- lots of nuggets!
Awesome, as always great content!
Thanks for your content, Joe. No BS 5 minute intros and blabbin, just excellent info!!! I remember you from the honda tech days and recognize that YOU ARE THE GURU!!!
Keep up the great work! Do you have any merch to sell so I can support your channel?
Rob
you owe me a monitor.. spit my drink all over mine @1:00
The course is really good. Well worth it to me
If only I were one of those lucky people who receive money vs handing it out for Christmas!! 😂
so many cool new tools! thanks!
Current Performance or Amazon, $28 bucks for the Holley CAN cable.
Tune the Trilogy 👍👍 well worth it. Don’t wait Get-R-Done
Speaking of new Holley products, are they ever going to update the dominator? That thing came out in what, 2012?
SOLID LOL moment @1:00 !🤣💯
Brb gonna try to convince fafsa i need the course
if you see wire nuts you should look for a divorce😂😂😂
Looks like a toxic fab tactical cleaver knife 😊
It is haha. One of the early ones
@@JoeSimpsonAtTempest those are so nice! Wish I bought one before they cost a left nut!
Question.. The optional Holley bluetooth module thingamuhjig ..... Does this it make it possible to velcro a $100 12" walmart tablet to my OSB homemade console and have a complete custom gauge layout?.....
Is the knock feature for Holley not up to par?
Does anyone have a link for that blue anodized deutsch crimper??
When you buy the course can you come back and watch it if need be?
Yea that’s the biggest benefit of a video based course like this. It’s too much information to just remember the first go around. You can go back and watch whatever it is you need when you need it.
Is that a Toxic Fab cleaver?
Yea, a super early one
Rad Cleaver ❤👍
That 5” screen doesn’t log, does it? It can play back a log via sd card but last I knew only the pro dash could log. Website description doesn’t say anything about logging either. Hope I’m wrong though!
It logs to the sd card like the 3.5”
How much to tune a 408 stroker ls stock ecu
🎉
Do you recommend taking your course on a iPad or a laptop?
Doesn’t matter one way or the other. Can watch on your phone if you want to
@@JoeSimpsonAtTempest thank you sir . Logging in now .
Appreciate that @leashelectronics info, hope you get that $400 light work'n. hahahahaha
nitrous dave makes a nice 10 circuit 200 amp relay board real cheap. stinger makes nice solid state control center relays also like msd's but cheaper.