The radio says antenna warning, because suddenly the radio is having a problem? The antenna warning means you need to check the antenna. The warning keeps you from burning up the output of the radio. But now you adjusted the radio so the warning doesn't work. And you still have an antenna problem......
Never adjust the internals components of a cb unless you know exactly what you are doing. The warning indicator is letting you know that your swr is hi. This can be an issue with your coax, with the antenna, or it may be a bad connection. None of these will require you to open a radio and work on it. Look for videos about adjusting the antenna, and checking the coax.
@@moonchildofficial6918there can be several reasons for this issue. It can be an intermittent connection issue, the coax may have gotten water in an unsealed end, or the antenna may need tuning.
@@sprrwprnts making adjustments or changes, especially when you don't know anything about electronics, is not permitted to be done by an unauthorized end user.
@truckergal when I bought my Volvo the antenna it had was way to short. I knew for a fact it wasn't a factory antenna. When I plugged 8n my CB i had the same antenna warning. I have the same exact cb. I did what she did in this video and then tuned it, and it worked perfectly. I went ahead later on and bought a new antenna, mount, and copper coax, and redid the whole system. Works like charm.
I owned and operated a radio shop for 20 years plus back in the 80's and 90's at Tiger Truck stop on I-10 in Grosse Tete , La. There is something wrong with your antenna system , 3 things can go wrong , the antenna itself is bad or needs retuning [ SWR ] , the coax or the stud that the antenna screws into.... You cannot set the SWR [ Standing wave ratio ] at the radio itself , you can CHECK the SWR with the built in SWR meter ..... That VR you turned with your knife is just an adjustment meant for a service technician ..... I reopened a small shop in Eunice, La...... Looking for a bigger building with Truck access ....
I don't know why ppl mess with stuff they don't understand. I've been watching alot of videos and the best solution is to take it to a tech who knows what they are doing.
@@danielseghers8214 I remember them well , back in 95 i think it was the female tiger gave birth to 2 cubs ...... I had 1 of them spoiled ....... Sadly when the owner finally lost his battle with whomever , and the tigers went to some kind of fenced in area refuge , lost interest in the truck stop business and sold everything ....... You would not recognize the truck stop today ...... Google map it and you will be shocked ...........
I think you just need to recalibrate it. My whip broke off one time and it said antennae warning too. I put a new antennae on, recalibrated it and it stopped saying it after awhile. I don’t think you need to take it apart.
Bad SWR. If channel 1 is higher than channel 40 lengthen the antenna. If channel 40 is higher than channel 1 shorten the antenna. Swr Should be under 2 ...1.2 would be great. You might have to install your own coax and antenna.. the factory ones Will not work well
Also, another comment i would like to make a point of...thank you for being a Truck Driver, and getting our commodities, whatever you are hauling from point a,to point b, because just like Military,First Responders,and Truck Drivers,is part of the reasons for our country to stay alive and very well, because we need them to live each day of our lives... Peace and Blessings to you all 👍🙏💯😎
The radio is telling you your antenna is messed up. A new antenna will take care of that. Turning screws in the radio will get the radio all out of tune. I have a radio just like yours. It is best to use a SWR meter to check your antenna. To get your radio back in adjustment you will have to take it to the shop. If you keep talking on it you will blow the finals in it.
I check SWR first and maybe adjust at antenna. I’ve heard stock antennas aren’t the best and the antenna is 90% of the signal. And I take a Cobra to CB shop and get it peaked and tuned.
Hope your Radio worked after this... Next time it happens... Do Not go into the Radio... Check your Antenna adjustments... Let us know how it turned out...Im a Radio Guy and am interested how you made out .... Enjoy the channel Thank You
You need to go to a cb shop and have the radio tuned and buy new antennas and new coax and have them set the SW yours on the new antennas and coax. That’ll fix your problem.
Your Antenna Warning is On OUTSIDE Antenna on Truck , It's Not inside of your Cobra CB Radio Either . Yes Re-Cal your Cobra SWR Meter to Solve the Issue . and Hand-Held SWR Meter Works Better Than a Inside Cobra CB Radio Cal. Meter . For SWR Waves ..Cal..
My new 29 ltd nightwatch only does this when the truck is running. I tried running a power straight from the battery and it still only does it when the engine is running. Any ideas?
good music, and although I did this on the radio. I think I started with a driver and then I started with all the transistors. In the end I had to change the radio. I'm still trying to calibrate my radio. I think I'll take it to big rig radio. Thanks for the idea anyway. you also have nice hair
Just so you know, by doing this all you are doing is adjusting the threshold for the warning light and not fixing the problem. You would do just as well with putting tape over the light. If you are not tuning the antenna system, you are not fixing the problem. Changing the antenna or antennas will not fix the problem. You are just putting on another untuned antenna. Most reputable CB shops will adjust the antenna to a usable SWR. No your radio is not going to immediately blow up but high SWR will shorten the life of it and effect the range of transmit and receive.
Have a cb shop help you. You adjust antenna or antennas, never from inside radio. Those are great radios and can last very long time. It has built in radio check in menu, and calibrate button on the left. You just need to be taught. Good luck with it 👍
I have a radio for you that will treat you well and I'll show you how to calibrate your antenna properly. 🤣 Thanks for your hard work. Wire isn't right or antenna is too short or too long
Not ! Your SWR's need recalibration there's no need to open up the radio you've turned a $20 job into possible $50 job leave well enough alone find a C.B shop 😊
You got to recalibrate it on your screen put it in calibrate stopping at the first little line about 3/4 of the way over and try that that's what I do with mine I got the same radio
ooof. People. Don't do this. This is not the way. Ohm out the coax, then ohm out the s0239 ends on each side of the truck. If those are good then your antennas are broken or out of adjustment(wrong length for the frequency being transmitted on because they have broken coil/wire/whip)
I say people are not cooperating I've been trying for days and days to get my cobra up and running no response to radio check I think people just think it's cool to have antennas hanging off their truck and CB radios for looks they think it's cool but they don't use them
Pleas tell me that you went to a CB shop and the fixed the issue? The antenna warning is that the SWR on the antenna is not set correctly. What you did when you adjusted the core in the load next to the antenna jack was change your output ever so slightly. You need to have a shop set your SWR and re-align the radio.
First thing you should check like another person posted was get an swr meter and check, that the radio your using has a built in way to chk, not a substitute for a good meter but it helps. drove Volvos before most new trks have what’s called a multiplexer usually driver side antenna is cb and passenger side is your am/ fm the multiplexer splits signal. May not be anything wrong with radio might be coax, multiplexer, or antenna
Hmmmm, my cobra was saying the same thing when I was driving a Kenworth long nose truck, then I went back to being a driver for a company and a different truck, and now when I use my cb radio, it doesn't say that anymore 🤷♂️
Got a question for you, you probably get it all the time, and it's a "just wondering" question, no disrespect intended in the slightest. But, you ever consider making an onlyfans page? Again, just wondering, have a great day!
Good video. Allow me a suggestion, enable the CC icon at the bottom of your video. Some folks have hearing difficulties; by clicking the CC icon now they can read what is being stated. When we click your video CC icon, or just move the mouse over the CC icon, it reads Subtitles/closed captions unavailable. Thank you.
Had the same problem and found after replacing the antennas it fixed the problem. Cheap factory antennas. Also just picked up a new 2023 T880 and it came with a bad radio. That’s what you get today after spending 200k
I'm a self owned 2018 Kenworth w-900L/ 346" wheelbase..I'm very much at home while driving her from all four corners of the United States, this year will be my 41st anniversary! As a trucker. Yes" I'm old school when it comes to CBs I use a Cobra 29 LTD classic with dual 2000 Wilson antennas because when im driving in between canyons and mountains I couldn't have better interception, if you buy a setup like this be sure to tune your CB with your antennas... Great video my friend be safe!!....
Hey not sure what kind of antennas you’re using Francis antennas work great You need to get your swr as low as you can almost to nothing You should have a calibration setting on it on one of your knobs That warning was because of the swr was too high Get your antennas as high as you can also away from the body of the truck if at all possible Those Francis antennas are all fiberglass and work great for that. No adjustment needed . Get you a road king 66 mic 🎤 also Will make your radio sound completely different as it’s a noise canceling mic Some get a kit and have the antennae mounted with new wiring that really does a good job and will make your radio sound amazing. Be safe Up here loading back for Arkansas then back to Arizona Be safe always Much love ❤️
An old driver could do some serious trucking with a simple old skool radio and a firestik antenna. Not anymore, most drivers don't communicate that way today. But it sure is nice to key up and get some info.
I see you trying to fix your CB box, 🚛🚚hope you can get it up and running 🙏👍Shelia 🚛🚚with prayer and luck 10/4 you can do this dear , my faith is with you 🙂🚛🚚take care be safe 🚚🚛👍🌹dear .
I was just wondering when you would have an opening for an appointment to check out my CB, lol 😂. If your radio was working, I can't understand after hearing that voice coming over the airwaves , seems like radios would be keying up all over the area 🤗 IMO could possibly be an antenna problem or calibration issue 🤷 Hope you got it working and having a great day 💞🙏
There’s a cb radio shop in Grand Island Nebraska at the pilot. Resteraunt vape shop massage and tattoo parlor in the same building. With like 20 showers. Love that truck stop. There’s also one in Gary Indiana at that pilot to. I just picked up the same radio today and having the same issues. Thank you for the video!
It will need too be recalibrated ( your running an all digital radio, if you were running one of the older styles with the meter already built in that wouldn't happen. But you should be able to pickup a calibration meter and take care of it. Or stop by any CB shop they should be able to take care of it pretty quick.
Calm me partial, but I've had the Cobra 29/ LTD Chrome radios the last 10 years. Since I'm in a 2021 Freightliner that lacks a descent roof antenna, I installed (hid) an 18' coax cable running to a 4' antenna on the passenger-side. I just make sure to calibrate it every week. Glad to see you "have" a radio!
@@truckergal an swr meter, you can find in many truck stops, is a simple little small meter that goes between the radio and the antenna to allow you to adjust it for maximum power maximum range.
@@truckergal they're very simple to use very inexpensive to buy. Or you can have someone at a CB shop put one on and get things adjusted for you. Won't you have everything set then take the meter back off and put it away until you need it again which probably wouldn't be for a couple of years
Looking for a new ELD device. What do you all recommend??? What do you use Sheila? TIA❤
Merx has us on Motive. It's wayy easier than the people net device I used previously. Imo 👍I'm curious to hear what others think too 🙏
Keep trucking
Motive formally known as Keep Trucking is probably the best one.
No! complaints here.. good "choice"..
The radio says antenna warning, because suddenly the radio is having a problem? The antenna warning means you need to check the antenna. The warning keeps you from burning up the output of the radio. But now you adjusted the radio so the warning doesn't work. And you still have an antenna problem......
You're exactly right. Her swr are extremely high and is going to cause the radio to burn out.
😂 women
@@maskedfisherman333 what an uncalled for reply.
Never adjust the internals components of a cb unless you know exactly what you are doing. The warning indicator is letting you know that your swr is hi. This can be an issue with your coax, with the antenna, or it may be a bad connection. None of these will require you to open a radio and work on it. Look for videos about adjusting the antenna, and checking the coax.
So what if it’s not a connection issue?
@@moonchildofficial6918there can be several reasons for this issue. It can be an intermittent connection issue, the coax may have gotten water in an unsealed end, or the antenna may need tuning.
Adjusting the varistor is advised by the manufacturer, the directions can be found on Cobra's website.
@@sprrwprnts making adjustments or changes, especially when you don't know anything about electronics, is not permitted to be done by an unauthorized end user.
You have to tune your antenna properly and the light will go off without needing to bypass anything inside of the radio
Cobras won’t calibrate with that warning mine didnt
You have a Standing Wave Ratio problem in your antennas. Not the CB. Get an SWR meter to adjust you antennas
It's good to go brother 👍 thank you though 🙏
@@truckergal Roger that be safe out there
Be safe too brother 🙏
Does the radio still work?
@truckergal when I bought my Volvo the antenna it had was way to short. I knew for a fact it wasn't a factory antenna. When I plugged 8n my CB i had the same antenna warning. I have the same exact cb. I did what she did in this video and then tuned it, and it worked perfectly. I went ahead later on and bought a new antenna, mount, and copper coax, and redid the whole system. Works like charm.
I just watched her wreck her CB. Next time just check the calibration and SWR. Your antenna probably just wasn't grounded properly.
I owned and operated a radio shop for 20 years plus back in the 80's and 90's at Tiger Truck stop on I-10 in Grosse Tete , La. There is something wrong with your antenna system , 3 things can go wrong , the antenna itself is bad or needs retuning [ SWR ] , the coax or the stud that the antenna screws into.... You cannot set the SWR [ Standing wave ratio ] at the radio itself , you can CHECK the SWR with the built in SWR meter ..... That VR you turned with your knife is just an adjustment meant for a service technician ..... I reopened a small shop in Eunice, La...... Looking for a bigger building with Truck access ....
I don't know why ppl mess with stuff they don't understand. I've been watching alot of videos and the best solution is to take it to a tech who knows what they are doing.
Miss the tigers at Tiger truck stop!
@@danielseghers8214 I remember them well , back in 95 i think it was the female tiger gave birth to 2 cubs ...... I had 1 of them spoiled ....... Sadly when the owner finally lost his battle with whomever , and the tigers went to some kind of fenced in area refuge , lost interest in the truck stop business and sold everything ....... You would not recognize the truck stop today ...... Google map it and you will be shocked ...........
I think you just need to recalibrate it. My whip broke off one time and it said antennae warning too. I put a new antennae on, recalibrated it and it stopped saying it after awhile. I don’t think you need to take it apart.
Bad SWR. If channel 1 is higher than channel 40 lengthen the antenna. If channel 40 is higher than channel 1 shorten the antenna. Swr Should be under 2 ...1.2 would be great. You might have to install your own coax and antenna.. the factory ones Will not work well
You might need to give the flux capacitor, a quick twerk that should help chica 😊
Also, another comment i would like to make a point of...thank you for being a Truck Driver, and getting our commodities, whatever you are hauling from point a,to point b, because just like Military,First Responders,and Truck Drivers,is part of the reasons for our country to stay alive and very well, because we need them to live each day of our lives... Peace and Blessings to you all 👍🙏💯😎
The radio is telling you your antenna is messed up. A new antenna will take care of that. Turning screws in the radio will get the radio all out of tune. I have a radio just like yours. It is best to use a SWR meter to check your antenna. To get your radio back in adjustment you will have to take it to the shop. If you keep talking on it you will blow the finals in it.
I would look into using an SWR meter or antenna analyzer. I've seen lots of times where the coax cables for dual antennas goes bad.
You have to adjust your antennas with a swr meter your swr's are to high
Yep your stuff needs to go to a cb shop. Never have I ever heard a lady ask for a radio check and not have 100 pluse male truckers come back with one
I check SWR first and maybe adjust at antenna. I’ve heard stock antennas aren’t the best and the antenna is 90% of the signal. And I take a Cobra to CB shop and get it peaked and tuned.
Awesome 🤗 thanks brother 🙌
hahaha
Buy yourself a Connex or Stryker radio and a good antenna. Those little radios do ok but you get what you pay for
😂 calibrate my $hit!
Hope your Radio worked after this... Next time it happens... Do Not go into the Radio... Check your Antenna adjustments... Let us know how it turned out...Im a Radio Guy and am interested how you made out .... Enjoy the channel Thank You
I'm afraid of your knife skills... thanks for the troubleshooting vid!
You need to go to a cb shop and have the radio tuned and buy new antennas and new coax and have them set the SW yours on the new antennas and coax. That’ll fix your problem.
Your Antenna Warning is On OUTSIDE Antenna on Truck , It's Not inside of your Cobra CB Radio Either . Yes Re-Cal your Cobra SWR Meter to Solve the Issue . and Hand-Held SWR Meter Works Better Than a Inside Cobra CB Radio Cal. Meter . For SWR Waves ..Cal..
My new 29 ltd nightwatch only does this when the truck is running. I tried running a power straight from the battery and it still only does it when the engine is running. Any ideas?
I think you blew past coax, antenna& SWR meter and straight into surgery 🤣🤣
good music, and although I did this on the radio. I think I started with a driver and then I started with all the transistors. In the end I had to change the radio. I'm still trying to calibrate my radio. I think I'll take it to big rig radio. Thanks for the idea anyway. you also have nice hair
Just so you know, by doing this all you are doing is adjusting the threshold for the warning light and not fixing the problem. You would do just as well with putting tape over the light. If you are not tuning the antenna system, you are not fixing the problem. Changing the antenna or antennas will not fix the problem. You are just putting on another untuned antenna. Most reputable CB shops will adjust the antenna to a usable SWR. No your radio is not going to immediately blow up but high SWR will shorten the life of it and effect the range of transmit and receive.
Have a cb shop help you. You adjust antenna or antennas, never from inside radio. Those are great radios and can last very long time. It has built in radio check in menu, and calibrate button on the left. You just need to be taught. Good luck with it 👍
I have a radio for you that will treat you well and I'll show you how to calibrate your antenna properly. 🤣 Thanks for your hard work. Wire isn't right or antenna is too short or too long
Not ! Your SWR's need recalibration there's no need to open up the radio you've turned a $20 job into possible $50 job leave well enough alone find a C.B shop 😊
You got to recalibrate it on your screen put it in calibrate stopping at the first little line about 3/4 of the way over and try that that's what I do with mine I got the same radio
Thanks Mike! 🤗🌸
@@truckergal You're welcome. You know your stuff. 🚛😁
ooof. People. Don't do this. This is not the way. Ohm out the coax, then ohm out the s0239 ends on each side of the truck. If those are good then your antennas are broken or out of adjustment(wrong length for the frequency being transmitted on because they have broken coil/wire/whip)
OR you can just do an SWR check and correct the problem. You are going to blow your finals out kid....
Buy a better microphone
No inside adjustment. You need to adjust the swr by lowering or raising your antenna length
I say people are not cooperating I've been trying for days and days to get my cobra up and running no response to radio check I think people just think it's cool to have antennas hanging off their truck and CB radios for looks they think it's cool but they don't use them
“Breaker 1 9 radio check” no response cause nobody has CB radios anymore. To many steering wheel holders in flip flops.
When working inside your radio use plastic
Pleas tell me that you went to a CB shop and the fixed the issue? The antenna warning is that the SWR on the antenna is not set correctly. What you did when you adjusted the core in the load next to the antenna jack was change your output ever so slightly. You need to have a shop set your SWR and re-align the radio.
Independent woman has know clue what shes doing, you need antenna work not going inside the radio .
Hottest real lady trucker I’ve seen! Git it gurl!
First thing you should check like another person posted was get an swr meter and check, that the radio your using has a built in way to chk, not a substitute for a good meter but it helps. drove Volvos before most new trks have what’s called a multiplexer usually driver side antenna is cb and passenger side is your am/ fm the multiplexer splits signal. May not be anything wrong with radio might be coax, multiplexer, or antenna
Can you change channels
Yeah maury is on at 3
Hun you just need to buy a new one I know you independent but you drive truck 🚚 go treat yourself
Wait so if there are hot truck drivers do they need male lot lizards?
So Real ... Not editing the mistakes .. cool.
It's your antenna.
Thank you so much 🙏 💕
Just NO. That's not how it works at ALL.
The swr is high. You either need to get a new coax cable, or your antennas are bad and need to be tuned
আপনি কেমন আছেন বোন
Heck ya! Hopefully it worked out for you 🤙🏼 sometimes antennas just need recalibrated if it doesn’t. Keep the shiny side up driver!
i think new coax and new antenna should fix iuess Trucker Gal
Love your videos your the real deal ❤
you got to just the annual upor down on the truck ok love ya
Big rig radio shop in Arizona is the best for fixing cb radios
Someone get this girl a cordless drill
i like your barb wire ta.t thats cool.
Best fix for a cobra is to throw it out the window
Look i got a connex 3300 I'll sell ya
All you need to do is lower your swr
Wow, this is totally wrong.
Hi trucker gal 🇲🇽 🇲🇽🌷🌷
u are beautiful :)
Hope that you got your CB fixed and had a nice weekend Shelia be safe
You ought to do a talke CB video.
Maybe SWR
What kind of mic is that
Nice
Hi honey
Cute trucker!!
,🥰😘🤩toooo cute
Your sounding good from this side of the screen lol
Thanks brother 🤗 lol
@@truckergal 10-4
Hmmmm, my cobra was saying the same thing when I was driving a Kenworth long nose truck, then I went back to being a driver for a company and a different truck, and now when I use my cb radio, it doesn't say that anymore 🤷♂️
Got a question for you, you probably get it all the time, and it's a "just wondering" question, no disrespect intended in the slightest. But, you ever consider making an onlyfans page? Again, just wondering, have a great day!
Handy
Good video. Allow me a suggestion, enable the CC icon at the bottom of your video. Some folks have hearing difficulties; by clicking the CC icon now they can read what is being stated. When we click your video CC icon, or just move the mouse over the CC icon, it reads Subtitles/closed captions unavailable. Thank you.
Hey
Had the same problem and found after replacing the antennas it fixed the problem. Cheap factory antennas. Also just picked up a new 2023 T880 and it came with a bad radio. That’s what you get today after spending 200k
I'm a self owned 2018 Kenworth w-900L/ 346" wheelbase..I'm very much at home while driving her from all four corners of the United States, this year will be my 41st anniversary! As a trucker. Yes" I'm old school when it comes to CBs I use a Cobra 29 LTD classic with dual 2000 Wilson antennas because when im driving in between canyons and mountains I couldn't have better interception, if you buy a setup like this be sure to tune your CB with your antennas... Great video my friend be safe!!....
Short in the coax, if you can here ppl talk great u just can’t talk till the coax is replaced. When I did my truck I used a good antenna and coax
Hey not sure what kind of antennas you’re using
Francis antennas work great
You need to get your swr as low as you can almost to nothing
You should have a calibration setting on it on one of your knobs
That warning was because of the swr was too high
Get your antennas as high as you can also away from the body of the truck if at all possible
Those Francis antennas are all fiberglass and work great for that. No adjustment needed .
Get you a road king 66 mic 🎤 also
Will make your radio sound completely different as it’s a noise canceling mic
Some get a kit and have the antennae mounted with new wiring that really does a good job and will make your radio sound amazing.
Be safe
Up here loading back for Arkansas then back to Arizona
Be safe always
Much love ❤️
An old driver could do some serious trucking with a simple old skool radio and a firestik antenna. Not anymore, most drivers don't communicate that way today. But it sure is nice to key up and get some info.
I'm sorry to hear about that. I hope they give you a new or DIY. Whatever works for you. Stay Safe Shelia👍👍💪💪💕💕❣❣🌹🌹🙂🙂
I see you trying to fix your CB box, 🚛🚚hope you can get it up and running 🙏👍Shelia 🚛🚚with prayer and luck 10/4 you can do this dear , my faith is with you 🙂🚛🚚take care be safe 🚚🚛👍🌹dear .
My radio did the same thing and I had just bought it brand new. I bought a 6 gauge ground wire and that fixed it.
❤
I was just wondering when you would have an opening for an appointment to check out my CB, lol 😂. If your radio was working, I can't understand after hearing that voice coming over the airwaves , seems like radios would be keying up all over the area 🤗 IMO could possibly be an antenna problem or calibration issue 🤷 Hope you got it working and having a great day 💞🙏
There’s a cb radio shop in Grand Island Nebraska at the pilot. Resteraunt vape shop massage and tattoo parlor in the same building. With like 20 showers. Love that truck stop. There’s also one in Gary Indiana at that pilot to. I just picked up the same radio today and having the same issues. Thank you for the video!
It's good to know there's a fix. I have an old unit sitting in storage that this might help fix. But boy stuff? Really?
It will need too be recalibrated ( your running an all digital radio, if you were running one of the older styles with the meter already built in that wouldn't happen. But you should be able to pickup a calibration meter and take care of it. Or stop by any CB shop they should be able to take care of it pretty quick.
Thanks for the information 👍 by the way I didn’t see your dog in the trip 😊
What her handle
Do she ever shoot any skip land I am a base station operator PaPaBear unit 63 in texas
Calm me partial, but I've had the Cobra 29/ LTD Chrome radios the last 10 years. Since I'm in a 2021 Freightliner that lacks a descent roof antenna, I installed (hid) an 18' coax cable running to a 4' antenna on the passenger-side. I just make sure to calibrate it every week. Glad to see you "have" a radio!
I would think you'd need to put an SWR meter on it and get it tweaked
Like troubleshooting?
@@truckergal an swr meter, you can find in many truck stops, is a simple little small meter that goes between the radio and the antenna to allow you to adjust it for maximum power maximum range.
@@truckergal they're very simple to use very inexpensive to buy. Or you can have someone at a CB shop put one on and get things adjusted for you.
Won't you have everything set then take the meter back off and put it away until you need it again which probably wouldn't be for a couple of years
I was thinking I had to go to a cb shop
@@truckergal you can but may not need to. They'll put an SWR meter on it to troubleshoot it.
Check some videos about using an SWR meter
Most truckers use dual antennas because the trailer causes dead spots.
Tweaking the pots...haven't done that in a long time. Glad to see you got the issue locked down.
Keep up the good work and be safe.
Thanks you just saved me some money.
Also it could be coax or antenna also
is ur sdwr ok less than 2?