Thank you jin I've learned new thing from you today. Thank you for the detail and instructions now i have a clear understanding. It's great when people like you exist because it helps us to see our mistakes and improve our skills. ❤❤❤❤❤❤❤ And hugs thank you. God bless you
Hello thanks for your videos. I’m totally starting from scratch on my sewing journey. Do you have any recommendations where I should start dirt before I dive into pattern making because I don’t fully understand how to use my sewing machine besides sewing in a straight stitch. But I’m learning through the manual first
Gracias Jin, yo no sé inglés pero utilizo el traductor, tus enseñanzas son valiosas. 2 preguntas. Cómo hago cuando se mide el talle delantero y espalda pero no son iguales. 2. Como obtengo la medida para la profundidad de la sisa
While drafting a wide square neck from the basic bodice, where should i place the neck width point on the shoulder line, So that the shoulder straps doesn't droop?? Also thank you for this tutorial.❤️
Hello, Jin I hope you're good. I have a question concerning the darts on the waist: I understand how you got the difference of 4" but what I don't understand is how you distributed/took in along the waist and darts. You demonstrated two methods on how you can take in the waist and darts but when I calculated these figures they were over 4" which was the difference between the chest & waist. Please explain how you got these figures used in your example, and how are they distributed along the waist. I hope I'm sense 🙈
If the difference between the chest and waist is 10”, you need to take out 5” because it’s half of the body. Then I’d take out 1.5” at the side seam, 1.75” at the front dart, and 1.25” at the back dart, and 0.5” at the center back. This is not the fixed rule. The idea is that the front dart would be the biggest for the bust shape. You can take out 0.5” maximum at the center back. Then the back dart will be the smallest. Hope it makes sense.
Hi Jin. I'm not at the level where I want to self draft yet, but I enjoy your videos. Dumb question: Does this bodice block work for knit? As I understand, knit bodice block is for slim-fitting clothes. If one makes loose-fitting t-shirts and sweaters, then they can use this basic bodice block?
Hello Jin, I successfully made a bodice using your instructions. It gives a nice fit. What should I do? My armhole seems a bit tighter. I made use of 8 because I wanted a close fit. Looks nice on my Ankara fabric, but doesn’t feel very comfortable
@jessicainnocent2519 You mean 8 inches? You said "tight", so see where need to be increase. Is it armhole depth? Or the curve should be scooped deeper? Evaluate where to increase and alter the pattern accordingly.
Hi, if you are making a pretty fitted bodice block for any kind of woven tops, then I would say YES. And you can transfer or remove when you draft design patterns. But if you're making loose fit blouse bodice block, you don’t have to.
Hello miss. Can we cut and close a dart by paper block, after draw a pattern to clothes by use a block if don't stitch this shoulder dart to dress no? Is it correct?🤔
@@PatternStudio101which means we have to minus the 1/2 “ taken for the shoulder dart and from the 3/8” below, have to take 1/2” inside to shape the Armhole curve, right? Am gonna try your Bodice block 👍
There are many types of basic bodies block, no dart bodies, waist dart bodies, waist and bust dart bodies and the bodies you drafted - with waist, bust and shoulder dart, can you clarify where we can use each of them. Its very confusing for me.
You can make bodice blocks without darts only for knit fabric. Other than that you need darts for the shape. It doesn’t matter where the darts are. You can choose the one easier for you. And you can transfer the darts as your design.
@@kinnyjohnston1805 If you want to have a shape, yes you need a dart. If you don’t want to have a dart, then accept a little bit of excess fabric around underarm. That would be okay because it’s stretchy fabric.
Hello Jin, firstly, I would like to thank you for sharing your wisdom. I would like to ask: where all those formulas came from? I am trying to understand the drafting of patterns and this question is following me all the time and I just can not find the answer. And I am even more confused because almost everyone has different formulas for pattern drafting. Thank you very much for your help.
Hi, first of all, there's no perfect formula that exists. There are a lot of different formulas for different fabrics, different fits, and different designs. But you still need some kind of starting point. Formulas are for just starting point if you have no idea where to start. And it's important to understand where those ideas are from. Then you will get better understanding with practice. Thank you!
@@PatternStudio101 I really would like to understand pattern drafting and fitting to exact body. What would you recomend to do? Is there any possibility to learn it from some book or someting... like theorethical way or it is thing of practise? Because I was trying to draft pattern, than cut it out of fabric, then stitch it, try it on, didnt fit so fix some mistakes, stitch it again, try it on, didnt fit and do this all over again and again. And it was kind of frustating for me and I was wondering if there is not some advise, some rules that when you do it it will work. Because after all those hundreds of years of people sewing and drafting patterns I just dont believe that pattern drafting kind of alchemy which you somehow need to learn by practice and there is no real guidance of how to draft pattern so it will fit anybody perfectly.
@tatianatakacsova I can feel your frustration. But let me tell you. I am a professional pattern maker for more than 20 years. Pattern maker's job is fitting & pattern adjustments most of time. If there's formulas for perfect fit, I don’t think the world needs pattern makers any more. 😆 People have all different body shapes. Fabric reacts in a different way. Each design requires its own fit. If you're not a professional pattern maker, I think you can purchase patterns and start from there. Do the fitting and revise patterns for the fit you want. That's a little easy way. If you want to learn pattern making properly, give yourself enough time to learn and practice. And start with pattern block making. Decide one area. For example, learn pant pattern first. Or focus on blouses first. There should be good books out there to learn it. But I don't know very well because the books I learned were mostly Korean and it was a long time ago. And I have an online course that teaches pattern block making and fitting. Take a look at my website, if that's what you want.
@@PatternStudio101 Thank you very much for your answer. So it seems like there is a loong jurney in fron of me. I was wondering if it will not be easier learning in CLO 3D in virtual world? Do you have any experience with that?
Teacher I'm from sri lanka. Can you help me? My customer chest circumference is 43 inches.chest÷4 - 1/2 = 10 .25" . Under arm line to shoulder line gap too much big? What happen teacher?
Thank you so much for your response. I am always confused about dart width and dart length. Please make a video on darts. How to put dart on shoulder dart and french dart?
![How To Make Men’s Dress Shirt Pattern_Body [Pattern Making Tutorial]](http://i.ytimg.com/vi/vd2YimhQOSM/mqdefault.jpg)
![How To Make Men’s Dress Shirt Pattern_Body [Pattern Making Tutorial]](/img/tr.png)
![How To Calculate Cup Size & Bust Dart Width for Bodice Block [Pattern Making Tutorial]](http://i.ytimg.com/vi/M4Oh7JOhamI/mqdefault.jpg)
I love your teaching style. Plain and simple. Thank you 🥰🦋
You're very welcome 😀
You are a gem. Thank you. May your business thrive beyond measure.Blessings.
Thank you so much!!
Thank you jin I've learned new thing from you today. Thank you for the detail and instructions now i have a clear understanding. It's great when people like you exist because it helps us to see our mistakes and improve our skills.
❤❤❤❤❤❤❤
And hugs thank you.
God bless you
Thank you so much Catherine. I just emailed you 😊
I’ve been waiting for you to do a tutorial on drafting the bodice sloper for so long thank you so much!!! ❤❤❤🙏🏽
There you have it 😉
I like the way you explain its plain and is plain and simple
Thank you 😊
You are great with your teaching. Thanks.
Thank you so much 😊
i want to learn more from you ms. Jin. you are ao good in your field. thank you for sharing.
Thank you for your kind comment. Join my email list, I send you emails with tutorials.
Hello thanks for your videos. I’m totally starting from scratch on my sewing journey. Do you have any recommendations where I should start dirt before I dive into pattern making because I don’t fully understand how to use my sewing machine besides sewing in a straight stitch. But I’m learning through the manual first
Thank you for this great work (pattern studio 101 ) 🤩🤩
My pleasure! Thank you 😊
Thank you so much.
❤❤❤❤❤
God Bless you. ..
You are a Great teacher. ..😊
Thank you so much 😊
You are the best Jin
Thank you 😁
Very good lesson thanks
You’re welcome ☺️
Gracias Jin, yo no sé inglés pero utilizo el traductor, tus enseñanzas son valiosas.
2 preguntas.
Cómo hago cuando se mide el talle delantero y espalda pero no son iguales.
2. Como obtengo la medida para la profundidad de la sisa
Thank you very much
You're very welcome 😀
Thank you miss. ❤❤❤❤ If you can teach us underwares patterns making. It's very usefull. 😊
I’ve never worked underwear pattern making. So I don’t think I’m the right person to teach it.
While drafting a wide square neck from the basic bodice, where should i place the neck width point on the shoulder line, So that the shoulder straps doesn't droop?? Also thank you for this tutorial.❤️
If your side neck point is less than half way of shoulder line, I think it’ll be safe. Maximum half way.
Thank you very much simply explain.
My pleasure 😊
Do you have a video on how to combine the bodice block to the skirt block to make a fitted shirt up to the hips with just waist darts?
Hi, I don’t combine the bodice block and skirt block to make a long bodice pattern. Simply add the hip line under the waist.
@@PatternStudio101 thank you
Thanks so mục
You're welcome 😊
Hi, I didn't understand how did you take the apex point? I mean length wise from the high shoulder point ..
You take the measurement from the body.
Such a great lady love from Pakistan🇵🇰🇵🇰🇵🇰❤❤❤ great job great work
Thank you!
Thank you! Best teacher❤
Thank you so much 😊
Thank you best teacher ❤❤❤❤❤
Hello, Jin I hope you're good.
I have a question concerning the darts on the waist: I understand how you got the difference of 4" but what I don't understand is how you distributed/took in along the waist and darts.
You demonstrated two methods on how you can take in the waist and darts but when I calculated these figures they were over 4" which was the difference between the chest & waist. Please explain how you got these figures used in your example, and how are they distributed along the waist. I hope I'm sense 🙈
If the difference between the chest and waist is 10”, you need to take out 5” because it’s half of the body.
Then I’d take out 1.5” at the side seam, 1.75” at the front dart, and 1.25” at the back dart, and 0.5” at the center back. This is not the fixed rule.
The idea is that the front dart would be the biggest for the bust shape. You can take out 0.5” maximum at the center back. Then the back dart will be the smallest. Hope it makes sense.
@@PatternStudio101 Thank you very much - I understand 👌
Thank you for this. Can this be used to make a dress block?
@@XxmisskjxX Yes, you can!
Another great video.
Thank you 😊
Thanks a lot
You're welcome 😊
Hi Jin. I'm not at the level where I want to self draft yet, but I enjoy your videos. Dumb question: Does this bodice block work for knit? As I understand, knit bodice block is for slim-fitting clothes. If one makes loose-fitting t-shirts and sweaters, then they can use this basic bodice block?
I don’t think you want to have a dart on your knit garments. I have videos on T shirt pattern making. I think that’s closer to what you want. 😁
@@PatternStudio101 Thank you so much!
Hello Jin, I successfully made a bodice using your instructions. It gives a nice fit.
What should I do? My armhole seems a bit tighter. I made use of 8 because I wanted a close fit. Looks nice on my Ankara fabric, but doesn’t feel very comfortable
Hi, I don’t understand "I made use of 8". Can you temm me what that means?
@@PatternStudio101 for my armhole depth
@jessicainnocent2519 You mean 8 inches? You said "tight", so see where need to be increase. Is it armhole depth? Or the curve should be scooped deeper?
Evaluate where to increase and alter the pattern accordingly.
Very nice ❤️
Hi miss jin.. I just want to ask if it necessary to put dart on shoulder when you do bodice block? Tia and god bless
Hi, if you are making a pretty fitted bodice block for any kind of woven tops, then I would say YES. And you can transfer or remove when you draft design patterns. But if you're making loose fit blouse bodice block, you don’t have to.
Hello miss. Can we cut and close a dart by paper block, after draw a pattern to clothes by use a block if don't stitch this shoulder dart to dress no? Is it correct?🤔
If you want to remove the shoulder dart, you can transfer to waist, or cut out at the neck & shoulder by half the amount.
Mam, where to join the side seam ? Is it waist /4 or should we also add the dart allowance.
Sorry, I don’t think I understand your question properly. Can you explain again?
It's really great. How do you make it👍
Thank you 😊
Hi Jin. Should the front armhole length be shorter than the back armhole length or equal?
It is a good starting point, but depending on the person’s posture, front armhole depth can be higher thanks to the back one.
Thank you
Thanks
My pleasure 😇
Please can you do a tutorial on how much side bust dart is needed for various bust cups
I'll make a chance to explain it.
Yes, I was about asking the same question but had to check the comments incase anyone had asked. Thanks for your clear and insightful lessons.
@@lya.raiment You're welcome!
Why do we need a shoulder dart Jin?
Hi, it's to make a shape for the back. When you picture a spine, you need a curve to the shoulder.
Are there any lectures with Korean subtitles on your website?
I don’t have anything Korean on my website, but all my UA-cam videos have Korean subtitles!
Hi, thank you for the tutorial but can i remove the shoulder dart?
Yes, you can. Don't make a dart from the beginning.
@@PatternStudio101which means we have to minus the 1/2 “ taken for the shoulder dart and from the 3/8” below, have to take 1/2” inside to shape the Armhole curve, right? Am gonna try your Bodice block 👍
@@marinadi532 Yes, from the CB, half of the shoulder width. Then 3/8” in for across back.
thsnks more
You’re welcome 😁
If chest circ and waist circ are only 5 cm btween them
I can cancel waist dart at back and front and keeb other darts ??
And i can't find vedio
How to measure guide on ur website
Yes, you can keep the back shoulder dart and the side dart.
Join my email list. Then I send you all the guides.
Hello Jin, I know I’m late but can’t seem to find this on the website
Hi, what are you looking for? Once you join my email list, I send all free resources by email.
It´s not easy but I manage. tks
Repeat several times! It will get easier 😁
Hello mam ,when u say chest isit high bust or full bust measurement.
It’s full bust!
Thank u mam
Mem I am Indian my blouse back neck depth 10 inch
Problem shoulder fall
Plz solve my problem
Hello… my sholder width is 8’ and chest is 33 and i am confused to use your calculation
I don’t think the shoulder width is right.
There are many types of basic bodies block, no dart bodies, waist dart bodies, waist and bust dart bodies and the bodies you drafted - with waist, bust and shoulder dart, can you clarify where we can use each of them. Its very confusing for me.
You can make bodice blocks without darts only for knit fabric. Other than that you need darts for the shape. It doesn’t matter where the darts are. You can choose the one easier for you. And you can transfer the darts as your design.
@@PatternStudio101 THANKS A LOT.
@@PatternStudio101do I need dart for stretch fabric?
@@kinnyjohnston1805 If you want to have a shape, yes you need a dart. If you don’t want to have a dart, then accept a little bit of excess fabric around underarm. That would be okay because it’s stretchy fabric.
@@PatternStudio101thank you for your reply. Is the chest circumference is under the armpit or same as the bust?
do you add seam allowances?
No I didn’t add seam allowance.
Deep nack blouse cutting. Like front is 7"" deep and back nack is 11" deep
Please can u do in cm aa wwll.
@@mariammoola2651 even if I explain with inches, you have centimetres on the screen 😊
Hello Jin, firstly, I would like to thank you for sharing your wisdom. I would like to ask: where all those formulas came from? I am trying to understand the drafting of patterns and this question is following me all the time and I just can not find the answer. And I am even more confused because almost everyone has different formulas for pattern drafting. Thank you very much for your help.
Hi, first of all, there's no perfect formula that exists. There are a lot of different formulas for different fabrics, different fits, and different designs.
But you still need some kind of starting point. Formulas are for just starting point if you have no idea where to start.
And it's important to understand where those ideas are from. Then you will get better understanding with practice. Thank you!
@@PatternStudio101 I really would like to understand pattern drafting and fitting to exact body. What would you recomend to do? Is there any possibility to learn it from some book or someting... like theorethical way or it is thing of practise? Because I was trying to draft pattern, than cut it out of fabric, then stitch it, try it on, didnt fit so fix some mistakes, stitch it again, try it on, didnt fit and do this all over again and again. And it was kind of frustating for me and I was wondering if there is not some advise, some rules that when you do it it will work. Because after all those hundreds of years of people sewing and drafting patterns I just dont believe that pattern drafting kind of alchemy which you somehow need to learn by practice and there is no real guidance of how to draft pattern so it will fit anybody perfectly.
@tatianatakacsova I can feel your frustration. But let me tell you. I am a professional pattern maker for more than 20 years. Pattern maker's job is fitting & pattern adjustments most of time. If there's formulas for perfect fit, I don’t think the world needs pattern makers any more. 😆 People have all different body shapes. Fabric reacts in a different way. Each design requires its own fit.
If you're not a professional pattern maker, I think you can purchase patterns and start from there. Do the fitting and revise patterns for the fit you want.
That's a little easy way. If you want to learn pattern making properly, give yourself enough time to learn and practice. And start with pattern block making. Decide one area. For example, learn pant pattern first. Or focus on blouses first.
There should be good books out there to learn it. But I don't know very well because the books I learned were mostly Korean and it was a long time ago.
And I have an online course that teaches pattern block making and fitting. Take a look at my website, if that's what you want.
@@PatternStudio101 Thank you very much for your answer. So it seems like there is a loong jurney in fron of me. I was wondering if it will not be easier learning in CLO 3D in virtual world? Do you have any experience with that?
@tatianatakacsova I've never learned CLO. But definitely, it's a great program to learn.
The shoulder of the Basic Body blouse are not the same please explain to me
Can you explain how different it is ?
Explain that the front and back shoulder are not the same sewing please
So sorry understand thanks
What softwaer is it?
I'm using PAD system.
Teacher I'm from sri lanka. Can you help me? My customer chest circumference is 43 inches.chest÷4 - 1/2 = 10 .25" . Under arm line to shoulder line gap too much big? What happen teacher?
It depends on
1. What kind of garment are you making?
2. If this for man? Or woman?
3. What’s your client height?
Women garment
Please guide for deep back and front nack
I don’t think I understand your question properly. Can you explain more details?
where is measure guide? I couldn't find .Please help
Go to my website and join my email list. Then you'll get email with all the free resources.
What s your software name...?
PAD system
The "How to measure" guide is missing on a website :(
@@MrManGoYou If you join my email list, you will get an email with it.
Thank you!
Jesus loves you!
How to know cup size and sift draft on pattern?
Most of the time, you can follow the bra cup size. And the bigger cup size the bigger dart you need.
Thank you so much for your response. I am always confused about dart width and dart length. Please make a video on darts. How to put dart on shoulder dart and french dart?
@beadsjewellerymaking2786 I'll make a chance to talk about dart. Thanks 😊
❤❤
❤❤❤❤❤❤❤❤❤
💯 👍
Low back nack drafting
Women shirt pattern plz
I’m have a video on men’s dress shirt pattern making and you can apply that method for women as well.
DEAR JIN KIM AM STILL LUCKING BEHIND I NEEDTHAT SOFT WEAR PLEAZ
Talk less and show more specially closer view.
Thank you very much
You're welcome 😊