Remove door lock without visible screws and stuck latch spindle

This is how to remove a door knob / lock / handle with no visible screws and a stuck latch spindle. You will need to know this in order to remove this door lock. The first is to gain access to the screws which are hidden under the cover plates of the door handle. The second is to remove the latch spindle by removing the o ring which is preventing the spindle shaft from being removed. This will drive people crazy if they dont know....
For more DIY and how to videos LIKE COMMENT and SUBSCRIBE.
Your donations help me to keep helping you .....
www.paypal.com/donate?hosted_...
#DIY #howto #billshowto

[@TwinkleKajaria]

Absolute Legend! been struggling with this for over 3 months

[@billshowto]

You’re welcome 👍

[@FkRoP]

Thank you so much. This is the exact lock we have and could NOT figure out how to get the bl00dy thing off

[@katinkamartin1708]

I was going crazy trying to work out how to remove the spindle - thank you for having the exact video I needed.

[@billshowto]

You’re very welcome 👍

[@MichaelSmith-sh1xr]

I’m so glad I found this video. I tore one of these a part to get it off but had 6 to go - thought there had to be an easier way. You’re a legend!

[@user-bj3mp8ro1h]

We were going crazy trying to work out what to do with a similar door lock we have. Watched endless videos without any luck and then we found this one. THANK YOU!

[@billshowto]

👍👍👍

[@trainingday6858]

Another Aussie posting an unbelievable video that I didn't think would exist. Great stuff! You gotta laugh at how many people would have been really pissed getting that bit off. I did a quick search and bang. Onya mate

[@umarsalah4534]

Had the same problem guys..frustrating🫤🤣 Thanks for the great video mate 👍

[@careyadams1131]

Thank you!!! I couldn't work out how to remove the spindle either.

[@radiotelegram]

Mate, that effin spindle drove me doo lally. Thanks for helping me regain the will to live. I'm now a sub, good on ya.

[@billshowto]

You’re welcome 👍

[@ratrace1272]

Thank you for showing how to remove the spindle - brilliant!

[@MisterKN]

Bill to the rescue once again... 👏

[@james-jq8sk]

Gainsborough Locks, yuk! Good Channel...

[@Kermit8765]

Holy crap you saved me! I was wondering what was wrong with my latch compared to all the other tutorials!

[@parisotto86]

Thanks champ, that damn o-ring had me!

[@mermaidstudio9936]

Really helpful! Really stupid O RING! Thank you!!!!

[@gird4p]

You're doing an awesome job dude.

[@noblethomas8419]

❤ I should’ve checked this video before I spent one hour to fiddle around with the spindle. Thank you so much 😊

[@dennisgallagher8502]

Thanks Bill, It was driving me crazy

[@dreddie1280]

Thanks brother, something as simple and small as that lead me to your video 😂

[@ravireddy7312]

Great tips - I was stuck with it your advice on o ring did the trick - thanks

[@ProfessorBurchh]

Saved me a huge headache. Cheers

[@MrColinengland]

Thanks this saved me a massive amount of time!

[@andrewblack2362]

Oh my god. Thank you so much!!!! This absolutely drove me nuts when I tried to remove the spindle. That darn o ring!!!!!Happy to say that as soon as I saw your video, I was able to replace the door handle that’s been out of action for months. Cheers

[@billshowto]

You’re welcome 👍

[@CheatinJerry]

Bill you’re a legend - thanks!

[@z2277625]

Thanks for helping me fix my door, cheers Bill

[@elizabethcatchpole6414]

Wonderful, you saved our sanity! Thank you 🙂

[@MichaelAussie05]

Brilliant mate thanks. You almost need to be a surgeon for this one. Cheers.

[@brianv56]

Great simple video which will save me heaps of time. 😊🙏👌

[@rosskennedy1922]

Just about to replace a latch today so this is top info

[@ContrarianIRL]

Years of confusion solved in 5 minutes. Well done, sir.

[@tabithaalice9369]

Not just years of confusion, during which time the top screw pulled further out from the door, but a considerable amount of time wasted, all fixed now, deceptively simple, thank you 🙏🏽

[@countryboy5884]

Thanks mate, I was going crazy trying to get that spindle out, you saved me from tearing the door down in frustration 😅

[@1Hbmb]

Extremely useful

[@adeled7663]

Legend! Thanks so much, I just cut it off took 2 seconds. Mine was a Gainsborough brand handle if anyones trying to figure it out like me.

[@bazfrisken7220]

Thanks Bill!Mate, I've come across a few of these over the years every now and then & they've had me stumped how to get out to make the painting easier.Now I know so, thank you!
Loving the vids and tips, keep them coming champ!

[@billshowto]

Painting the door will now be a breeze with locks finally off 👍👍👍

[@xiaodongzhao2883]

Great video, Bill. Thanks 👍

[@ragnarlothbrok2058]

You are a champion mate… Double thumbs up 👍👍 from me…😊

[@dennisc8390]

Thanks buddy it’s just what I needed to know

[@Diegolikesducks]

Thank you so much

[@centuryliving]

Wonderful video, saved the day for me, thanks!

[@murrayturner4050]

You are a life saver

[@howdyadaygo1]

THANK YOU

[@thirunavukkarasushantharaj1843]

Thank you Bill

[@mayurpatel4314]

Thank you, very helpful

[@angelbellbell3755]

Thankyou, i was about to rip the door off it hinges but you saved me. What is with the rubber washer, dumb. Love hearing a aussie voice on a UA-cam help channel .

[@shantharathnayaka4836]

Very good explain. Thanks

[@IBecca4]

Thank you! I would never have figured this out.

[@michaelaq3524]

You the MAN !!!!!

[@jennythu6395]

I’m stuck at removing the cover 😫It’s not as easy as just turning left. Haven’t gotten to the ring part yet. It’s exactly the same brand I have here. Thanks for the vid

[@fredericthom8113]

Thank you so much , i try a lot of time !! Now i understand !!

[@talk2diegolive]

Thanks, just what I needed to know

[@nithinkv1377]

Thank you. Was stuck with the o ring for two hours before i came across your video.

[@billshowto]

You’re welcome 👍

[@Davidculshaw70]

Cheers that did my head in until I saw this.

[@stitta9814]

After this video helped me realise there were covers in the way, I then found out that the allen key screw that was holding the cover on was stripped and preventing me from getting one cover off, but I did manage to fix several loose handles now though. Thanks heaps.

[@zacj63]

Great video 👍👍👍

[@evaarriaga6680]

Omy God I was getting to the crazy part lol. Thank you thank you

[@prakashkumarcit]

Thanks a lot mate..

[@Stevej2013]

Great video Bill. Cheers mate.

[@billshowto]

You’re welcome 👍

[@caseyevans7537]

One word...... LEGEND

[@andrewmax26]

Nice.. best vid.. thanks dude

[@gheeb4286]

Thanks bro

[@tommygunnn3949]

You saved my sanity!

[@marksaltissi7844]

Thanks! Saved me!

[@darrenchoksi3901]

you have saved me couple of hundred dollars. thank you very much.

[@billshowto]

You’re welcome 👍

[@cdean4719]

Thank-you! Sanity intact

[@jacksonroad9263]

Thanks nice tip

[@chikowhitey]

thanks mate, just what I needed

[@billshowto]

👍

[@safetycabinets]

Thanks sir

[@eginators34]

Your channel is such a nice change from all those commercial "faux DIY" channels with guys in branded polo shirts trying to sell you some whacky product.

[@billshowto]

Lol 👍

[@rubenchauhan8434]

Thanks 🙏🙏 mate it's help me I was stuck same step and waste one hour to remove whole lock unit and your video save me and I am so glad that I have fix new lock ,thanks again for your video

[@billshowto]

You’re welcome 👍

[@davidpollitt1216]

thanks Bill.....solved thanks to you

[@billshowto]

👍

[@Melbournewelder]

Thank You Bill 👍.

[@billshowto]

You’re welcome 👍

[@MatthewHutchins]

Thank you

[@Teslaide]

Brilliant Bill!
I couldn’t quite work out how to get that plate off. Now it is a piece of cake to tighten the screws again.
Thanks for all your great videos. You’re a legend!
Cheers
Kev

[@billshowto]

You’re very welcome 👍👍👍

[@HueyAT5]

Keep up the good work mush!

[@billshowto]

👍

[@lorettarobin5467]

Coooooool thank you

[@daveduffy2292]

Thanks heap’s

[@bogdanbonk]

Legend

[@karthikramasubramaniam8721]

Awesome! I had the door handles loose and rattling which this video helped me a lot. But why would I need to remove the spindle - to solve what problem? I just left it there and tightened the screws and the rattling is gone!

[@marisayoung9762]

Thank you so much, got up to being able to remove the spindle, who would have thought that stupid rubber seal was the answer!

[@billshowto]

You’re welcome 👍

[@SuperNumberwang]

Thanks for the help! Unfortunately, the spindle still wouldn't come loose after removing the washer. I had to use some locking pliers to yank it out. Hopefully this helps someone else.

[@dougkinney5983]

Great video! I was about to break out a saw

[@sunitsethi]

Thanks for your video.
Could you pls share the video where the spindle has a hole on one end. And use of allen key to remove

[@MC-oi4mf]

Hi Bill, thanks for the videos! Ive got the same gainsborough locks in our internal doors. The kids have been playing around with the locks and the push button screw has fallen out. Screwing it back in doesnt seem to lock the door - any ideas??

[@SK-iv4ml]

Nice!

[@billshowto]

👍

[@malpaul]

Ive just come across your channel. You explain things very well so I have great confidence that youll be able to help me with this problem. Ive been in the construction game for a while now. Im not at all a lock smith, but Ive had to wrestle with a few locks in my time. Ive recently come across an entrance lock that does not move. The door was closed and we couldnt open it. Ive taken the whole thing apart, both sides, up to exposing the latch. It has a type of metal sheet surrounding it. So, basically, you can see the latch going through and this vertical sheet is totally surrounding it and takes up the whole...um...hole, so the latch cant be wriggled free. Im hoping theres a way of taking it out without damaging the door. Have you come across this type of locking mechanism often?

[@billshowto]

If you send me a photo I may be able to help. If you just need to open the door and latch is faulty I have a video on using door shims to open the door. Hope this helps👍

[@genxmamabear5965]

Thanks so much 😅 you just saved a marriage!!

[@eLuZiveMaRiio]

The issue is the spindles has gone in and the door is shut. Door won’t open now and has no handle, just the spindles stuck in it

[@jodiepinnington1726]

The same has happened to mine. It closed so I can’t get to the other side to loosen the second screw. How did you manage to fix it?

[@bhagyashreenolkha6546]

How did you fix it? I have same issue my door is locked

[@ValBarber-by1sd]

Me too same issue

[@nigelfletcher8266]

Thanks - worked a treat. I understand its purpose is to keep the spindle central, but Wouldn’t it be fine without the o-ring there? I can’t imagine the spindle slipping out of one of the handles.

[@decrey001]

Oh my god thank you.

[@Infernokid784]

What's the bore whole of this lock I seem to have a Gainsborough with a bore hole that's small than 50mm

[@Craigamail]

Thanks bill but mine is a Gainsborough almost the same as the one you show BUT mine has no ‘O’ ring or circling or screw. I still can’t get B xxxxxx d out. Any tips ???
TIA

[@The-Wise-One]

Mate thank youso much, that rubber oring, was a prick, thank you so much...legend

[@billshowto]

Lol, I still curse it till now 👍

[@The-Wise-One]

@@billshowto I was cursing, close to snapping it.. thanks again

[@Lippylou785A]

Any tips for how to fix one of these that’s stuck locked please? 🙏

[@Improveng1]

Nice one Bill, thanks for the great video.

[@billshowto]

👍

[@simbobby03]

You are no1.. Cheers mate

[@billshowto]

👍

[@yusufg2188]

Thankyou very much bill amazing and straightforward video quick question i broke one of the rubber seals trying to take it off does it have to go back in when i put the handle back on cheers.

[@billshowto]

Hi, no I dosnt have to go back on 👍

[@yusufg2188]

@@billshowto Thankyou so much again bill God bless

[@MrCrysis880]

We have the same door knob but missing the O ring, what size O ring is it?

[@htran0432248924]

Would you be able to make a video on this same style door handle but adjusting to make sure its sits straight and not wonky? Builders are so shit today that they can’t even do that so I am trying to figure how to do it.

[@larion2336]

Thanks for this, finally managed to get mine off. The innards of mine were much simpler than this (no o-ring, thank god) but the outside cover was really tight and felt like it'd been glued in place. It also opened only from the outside when most articles talk about taking it off from the inside first, go figure.

[@andylauniuvao9676]

Awesome video but my issue is that im locked out so i can only access the outside of the door handle. Not sure how to get it open from here but if anyone has any tips please feel free to share.