Lol, at first I thought that I wasn't going to like this video because of your accent but about 1 minute into it I realized it made me listen more closely and I learned a lot from it. Somehow either me or my previous instructors missed a couple basics that frustrated the fuck out of me before I saw this vid. THANK YOU VERY MUCH!!
Absolutely the best series of lectures on Fusion 360, without a doubt. One question: I noticed that when you bring the drawing up on the left of the screen it appears to be named Fusion 360 Season-2.pdf - do you have a set of pdf's for each lecture that can be downloaded, printed and used as a hard copy next to my screen as a reference whilst working?
IDK, what to say but after lots of nosing around finally I found what I was looking for thank you very much for the way you’re teaching and helping people “Shokria!
Fusion 360 Line to Plane ua-cam.com/video/XcjcFWioeWo/v-deo.html This tutorial shows how to use line to create plane in Fusion 360. This tutorial also shows Fusion 360 angled plane and Fusion 360 plane at angle
hi good day..can you help how to used the conincident because I try to used conincident it always appear at the side of my model instead at the middle..how??
I had the same issue, So I instead created a sketch on the outermost part of the side and the using the extrude command made a offset plane of 50mm and set the measurement type to whole Length and gave it a length of 12mm that gave the exact result as shown the video
Lol, at first I thought that I wasn't going to like this video because of your accent but about 1 minute into it I realized it made me listen more closely and I learned a lot from it. Somehow either me or my previous instructors missed a couple basics that frustrated the fuck out of me before I saw this vid. THANK YOU VERY MUCH!!
You're welcome 😊. It means a lot.
What a shallow dim witted person you are to judge someone based on their accent
These videos at first I thought wouldn't be good based on audio quality, but damn, straight to the point and really well put together. Love it!
your teaching skill is excellent
I search many cad cam tutorials but your teaching is perfect😃😃😃😃
This was by far the best step by step introduction, thank you for this video!
You're welcome 😊
Absolutely the best series of lectures on Fusion 360, without a doubt. One question: I noticed that when you bring the drawing up on the left of the screen it appears to be named Fusion 360 Season-2.pdf - do you have a set of pdf's for each lecture that can be downloaded, printed and used as a hard copy next to my screen as a reference whilst working?
IDK, what to say but after lots of nosing around finally I found what I was looking for thank you very much for the way you’re teaching and helping people “Shokria!
You're welcome 😊
Thanks for waiting :)
Excellent video mate, cheers
Thank you 😊
Fusion 360 Line to Plane ua-cam.com/video/XcjcFWioeWo/v-deo.html
This tutorial shows how to use line to create plane in Fusion 360. This tutorial also shows Fusion 360 angled plane and Fusion 360 plane at angle
Learn complete SolidWorks for Free:
ua-cam.com/video/Ulttc_2p4DY/v-deo.html
Fusion 360 Complete Playlist: ua-cam.com/video/vVFYrBClkPc/v-deo.html
Do you know we also teach AutoCAD, SolidWorks, CATIA, Creo, Pro Engineer and much more?
Can you please drop contct email to schedule discussion on how to set up training rom you?
Where do you teach at or only online?
Only @cadcamtutorials
i like how you tell us what we are doing with the shapes before you get into it
Thank you 😊
How much time does this will take?
Learn Complete CATIA V5: ua-cam.com/video/Co9FF_ZaD-8/v-deo.html
Thanks for the tutorial learnt something on F360 fr the first time ❤️✌️
hi good day..can you help how to used the conincident because I try to used conincident it always appear at the side of my model instead at the middle..how??
I had the same issue, So I instead created a sketch on the outermost part of the side and the using the extrude command made a offset plane of 50mm and set the measurement type to whole Length and gave it a length of 12mm that gave the exact result as shown the video
CATIA Drafting Tutorial Full ua-cam.com/video/Zy1HFiraQQQ/v-deo.html
SolidWorks Sheet Metal Full Tutorial ua-cam.com/video/dakMFFTixtw/v-deo.html
Good explanation.
Glad you liked it
Learn AutoCAD 3D ua-cam.com/video/Vm_fQom-Rm8/v-deo.html
Well done sir! Thank you.
You're welcome 😊
Excellent 🎉
Thank you 😊
Please more tutorials for electronic Engineering🙏.
Great tutorial!
Thank you 😊
Thank you Sir.
You're welcome 😊
great job
Thank you 😊
Great !
tq
Plx continue
Fusion 360 Practice Exercises for Beginners
ua-cam.com/video/MhZ3TP4k5Pc/v-deo.html
Learn AutoCAD 2020: ua-cam.com/video/uy2GvFwVJU4/v-deo.html