Jmalcom2004 what rearend are you using? I have a 1990 step side with a built 355, built 700R4 and a 410 gear with an auburn carrier. I’m looking to build an s10 to save around 850lbs curious to know what rear end your using and how it’s holding up.
Put thousand miles on that truck in two blocks glad to see two wheel peel one tire fryer had to go sounds good for budget 350 just the way real world folks like it keep it real!
It can be done pretty cheap if you currently have a 4.3. The motor mounts and transmission bolt right up if I’m not mistaken, the trans won’t last long though.
Daniel Martin I have one, but I think it was originally a 2.8 5-speed. How much of a problem would it be to swap in a 4.8/5.3/5.7/6.0 LS/Vortec in it? I plan on buying the motor/transmission combo out of a wrecked model (Silverado, Tahoe, maybe Vette/Camaro if I get lucky)
Bad? As in not good? The Iron Duke was one of the best 4cyl engines GM ever made. That's how it earned that name. Bulletproof. I have had 2.8 V6 trucks too that I beat on relentlessly for years in food service delivery that showed great reliability. The 4.3L is a 350 with two cylinders cut off. To say a 4.3 is a "bad" motor is ridiculous. That's like saying a Chevy small balck is a bad motor. Perfect engines? Heck no, but you still see quite a few running the roads today in original form, and they haven't made a truck in the original style in 30 years.
cliffbadazz318 probably putting down somewhere 300 and 400. I remember him saying this isn’t a serious build so I can’t imagine it’s making big numbers. doesn’t take big power to send it with an S dime though 😂
I’m going to say around 360-380hp. It’s sounds like a healthy cam, it’s got vortec heads which flow pretty damn good, I guess it all depends on what compression the bottom end makes with those 64cc heads. I’ve seen 10:5.1 motors with those heads make a little over 400hp at the crank.
cliffbadazz318 prb 300 to the wheels naturally aspirated and it’ll be around 450-470 on nitrous. It’ll be going on the dyno soon. And it doesn’t have stock heads. Heads are aftermarket. Go check out my $5000 budget build playlist and look at all the episodes whenever you have time. I filmed the build from start to finish
Compared to the 2.5 4 cylinder, or the 2.8 v6, 250whp is ALOT. Especially with no weight over the rear. Me and a couple buddies swapped an S10 in high school, and a totslly stock 350/th350 combo, with a welded rear end, went 14.0 at 100mph.
Love the truck man just started building my own it's come a long way in the last eight months from the little Vortec V6 it was check it out and tell me what you think almost done with it. Subscribe to my channel always adding new videos every time I add something to the truck only thing I got left now are some better tires and some traction bars. At the moment has a pretty bad well hop from a dig have a 350 with a small cam 410 gears and a mini spool check it out tell me what you think keep up the good videos
Figured I’d put this together since we haven’t been messing with the truck lately! But a new update is coming next week!
Soon it will be time to go back to Summit for a set of 275 28s. The Truck should Run 7.60s in the eighth.
Truck sounds good as hell💪🏼💪🏼💪🏼
Jmalcom2004 what rearend are you using? I have a 1990 step side with a built 355, built 700R4 and a 410 gear with an auburn carrier. I’m looking to build an s10 to save around 850lbs curious to know what rear end your using and how it’s holding up.
Curtis Mavis Huff going to get the radials next week or the week after!
spraym 88 thanks bro
Everyone please give this a like. This truck has come a long way and jmalcolm has put a lot of work into it
G Kellz yes it has and I really appreciate the comment. Thanks
Sounds good and healthy on a shoestring Budget showing how it’s done!
I was thinking about going back to Old School and build a carbureted 350 S10. Those stock wheel burnouts were hilarious.
Awesome truck! I loved the reflective tape on the back lol. I have been looking for that exact truck to put a small block in! Great job on it!
This is the best 350 s10 video I’ve seen on UA-cam
Every time it comes out the shop it looks better and better, love it!
Put thousand miles on that truck in two blocks glad to see two wheel peel one tire fryer had to go sounds good for budget 350 just the way real world folks like it keep it real!
That truck is bad ass cant wait to finish mine
That truck is beyond badass can't wait to get my hands on a second gen and put a lt1 into it
Wow I have a 93 s10 thinking about swapping one of these in there How much did you spend. If you don’t mind me asking
I want to know as well.
It can be done pretty cheap if you currently have a 4.3. The motor mounts and transmission bolt right up if I’m not mistaken, the trans won’t last long though.
Daniel Martin I have one, but I think it was originally a 2.8 5-speed. How much of a problem would it be to swap in a 4.8/5.3/5.7/6.0 LS/Vortec in it? I plan on buying the motor/transmission combo out of a wrecked model (Silverado, Tahoe, maybe Vette/Camaro if I get lucky)
Dr. Lyle Evans I want to know this as well,just like a ball park number as I have the same motor as you
God a small block always sounds like heaven
sounds great! What is done to the motor im building a 84 s10 with a 350
Did this truck ever make a pass I love it!
What kind of exhaust is on it? An is that original trans an rearend?
What was making it so loud in the beginning? It sounds awesome
throwback!!! so what you think cheapskate or browncoat?
Wats all been done to this motor?
Can you still run factory ac with a 350
Old School baby! 🔥😎
Awesome, been waitin on this one!
What the part number for that cowl hood?
Gotta slam that door😁 iknow the feeling
did you use the stock gas tank .my 93 has a eletric one in the tank.my 383 chevy running a 850 carb
It has a fuel cell in the back of the truck
nice makes me wish i keep my s10 they had bad original motors lol im sure if you look around you could find one for cheap
Bad? As in not good? The Iron Duke was one of the best 4cyl engines GM ever made. That's how it earned that name. Bulletproof. I have had 2.8 V6 trucks too that I beat on relentlessly for years in food service delivery that showed great reliability. The 4.3L is a 350 with two cylinders cut off. To say a 4.3 is a "bad" motor is ridiculous. That's like saying a Chevy small balck is a bad motor. Perfect engines? Heck no, but you still see quite a few running the roads today in original form, and they haven't made a truck in the original style in 30 years.
I'm building a truck similar to this. Just got it moving on its own today actually. Your video has me thinking about beefing up s few things. Lol
Dude this is an old video. I wanna see a new vid on the truck. And damn Richard disher!!!!
Smitty 454 😂😂
That thing looks like so much fun!
👍🏿Hot truck bro! When you gon drop it lower to the ground?
What all was done to this 350 and whats behind it?
Rowdy truck! Check out some of the tire smelting I've done with mine.
When's the 8.8 posi going in
What rear end is it it?
Flomasters?? 40 or 44??
What transmission
Jmalcom2004 how much would it cost to do that too my s-10 ?
You can see the mans white teeth through the windshield as he is smiling pulling back in after the first tire burn.!
That's what we Aussies would call tire testing not burnouts 😂😂😂
Marty Burgess 😂😂😂 Man I like that. You gave me a new term to use. Shout out to the Aussies lol. I like that
Strong motor now you need a locker
Curtis Price got one! Check the latest updates!
What's done to it ?
just bought an s10 with a 5.0 v8 here in the uk, my first yank cant wait to get it on the road.
also want one of those hood cowls from summit but shippings like £800 ha
Have you ever seen a smallblock s-10 in the UK?
When u going to get back on it iam still working on mine
Is it standard cause I got a s10 2001
Is da motor stock
yes sir that's the kind of testing I'm talkin about mini trans brake
Do u have a full posi or limted slip? U got it running good for what you put in it💪💪
Ha i can do that in my silverado just mash it down back tire spins and hits second it goes side ways lol
Aye cheapskate looking like it's ready main good work UNC get down over there
Ran out of gas or never caught us
Only 350?
No less fun than a Chevelle, Nova, or Camaro. Why TF not?
Good O cheapskate Gettn it Done 💥 💨 💪🏻
What all is required to drop a 350 into a 93 with a 2.8
A trans-adapt s-10 V8 swap kit it comes with everything
Yall must have a big stash of used tires to fry....
Get you some tires that's gonna hook and take it to the track J
Gods' Image coming when it warms up but for now, it’s okay time lol
Power brake..thats it..
How much horse power you think it’s making??
cliffbadazz318 probably putting down somewhere 300 and 400. I remember him saying this isn’t a serious build so I can’t imagine it’s making big numbers. doesn’t take big power to send it with an S dime though 😂
blackonefifty 300 to 400 hp on stock heads 🤔
cliffbadazz318 I was being generous 😂
I’m going to say around 360-380hp. It’s sounds like a healthy cam, it’s got vortec heads which flow pretty damn good, I guess it all depends on what compression the bottom end makes with those 64cc heads. I’ve seen 10:5.1 motors with those heads make a little over 400hp at the crank.
cliffbadazz318 prb 300 to the wheels naturally aspirated and it’ll be around 450-470 on nitrous. It’ll be going on the dyno soon. And it doesn’t have stock heads. Heads are aftermarket. Go check out my $5000 budget build playlist and look at all the episodes whenever you have time. I filmed the build from start to finish
Amazing. I want to do this so much
Same here man just picked up my first s10
2:35-2:38 balls?
holy cow that's awesome
I see jmalcom 💪
2:37 scared me!
Damn!...that 66 Chevelle at .37 tho..
what trans? i haven’t watched any other videos first i came across
Cheapskate? Out ran 40 cops across 4 county's in a 327 powered S10
I thought this came out in 2005 the intro was that bad
Seems like it may run when you put a little giggle sauce to it
Shay Earl that’s what I’m hoping. It’s getting installed now
Oh yeah💪🏾💪🏾💪🏾
The big monroe GA
Lmao 250 to the wheel!!!!!!. Wtf???
Compared to the 2.5 4 cylinder, or the 2.8 v6, 250whp is ALOT. Especially with no weight over the rear. Me and a couple buddies swapped an S10 in high school, and a totslly stock 350/th350 combo, with a welded rear end, went 14.0 at 100mph.
I want one
Blowing tires off
Looking good
God please answer me ❤️😭
Someone needs driving lessons.
BadAss!!!!
GAAAAAAAH DAAMMMMMM
Love the truck man just started building my own it's come a long way in the last eight months from the little Vortec V6 it was check it out and tell me what you think almost done with it. Subscribe to my channel always adding new videos every time I add something to the truck only thing I got left now are some better tires and some traction bars. At the moment has a pretty bad well hop from a dig have a 350 with a small cam 410 gears and a mini spool check it out tell me what you think keep up the good videos
nice
nice'
What transmission