How to Replace passenger side CV Axle on Honda Accord 2008 to 2012 Full Guide (DIY) Save $300
Вставка
- Опубліковано 23 сер 2024
- Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
#axle #cvaxle #accordacaxle #hondaaccord #accord #honda #hondaaccordcvaxle #2003accordcvaxle #accordpassangersideaxle #2004accordpassangersideaxle #2005accordpassangersideaxle #2006accordpassangersideaxle #2007accordpassangersideaxle #2008accordpassangersideaxle #2009accordpassangersideaxle #2010accordpassangersideaxle #2011accordpassangersideaxle #2012accordpassangersideaxle #assangersideaxle #replaceaxle #remove #repalce
If you're doing this in your driveway without a lift, it's a good idea to get a axle popper/slide hammer kit, as well as one of the fork-shaped poppers. I used the fork one on the drivers side and the slide hammer one on the passenger side, they come out super easy with the right tools.
Oh yes I guess that would be good idea for me to mention next time I do axle video
@@RBTheMechanic yeah to hit it out with pry bar from back side is great if you have lift but is difficult if you just having jack stands..with slide hammer puller you can just do it from the wheel well.
@@AK99581 yup
How about is it’s stuck have all those tools but it won’t come out
@@luisrivera9929 Maybe it's rusted in there? Try spraying it with penetrating oil and let it sit for a bit, the try again.
Good video used it as guidance to change mine out--would have been better if you had take a little extra time and explained how much to tighten. I was a little confused about the top nut that you had to pry down the ball joint and how much to tighten it. My Jedi mechanic tightened it on up for me as it was slipping in there when I tried to tighten it. Thanks again.
Yeah torque specs are always problem I had issue with some one leaving somthing loose cuz he had diffrent car
How did you manage to slip in the axle so easily. Everything came off good up until I got to where I tried to put the axle in. The axle was the same. The same length. The part that slips in was the same diameter and the same splines.
It’s jut kick try Angelina the c refrained clip open end down and put tiny bit grease to hold on center
@@RBTheMechanic i got it installed! I was trying to push it on by holding the inner side of the axle. But I ended up rewatching your video again and I seen where your hand placement was and it went right in and I was like “Oh wow” 😅😅🤣🤣 thanks for the video man! Cheers! 🥂
😮
Looks manageable. My 2010 is making the clicking sound when turning right. I just replaced the upper control arm on the left side a couple of months ago, and it's almost the same procedure.
Click click on turns is most likely the axles but double check all of ur work
@@RBTheMechanic Its on the opposite side where I worked its been doing it. Thanks for the vid
My Honda Accord is vibrating on the passenger side only, mechanic recommends both side change, I'm on a budget, should I just replace the passenger side? Or both
Do as pair
Do you have to grease anything?
No
Excellent video. Thank you
Welcome!!
Did not see the torque information on all nuts at the end of the video. Can you possible list them out? Many thanks.
I’ll post somthing in community pics tomorrow
Tengo un Honda Accord 2012 y tiembla del lado derecho de llanta, no se que será puede que sea el eje ya le hice eso del lado izquierdo hace como tres meses. Yo misma se lo hice porque me gusta la mecánica. Me puedes dar una ayuda. gracias.
Sorry. Idk spanish
I have a Honda Accord 2012 with that problem, when I drive the car the tire of the right side is shaking a lot, and I want to now if you can get me a little help. Thank you.
Nice, how many miles on that car?
Around 115k
My question is I need both my axles changed driver and passenger. But last time I tried purchasing a passenger side axle it was roughly 4-5 inches too short compared to oem. Is this part number the right size?
If u got same exact and engine size but u can check with parts guy they have catalog for parts
Hey, Bro. I am about to do this job, Do you recommend Cardone new axle??
Yes that should be good
Looking for CV axle for 2011 Accord. I see a lot of people recommend Raxles axles if not buying oem. How do these compare?
I use none rebuilt or refurbished timkin or original dealer item
@@RBTheMechanic So is Trakmotive your go to?
@@catdaddy7909 I have used it lot no issues
Thank you!!
You're welcome!
What if axle won’t set/click into place?
Then u keep trying it has to snap in other wise it will pop out
I was trying to learn what is the axle for🤔I have to get this work done to my Honda and they’re charging $958. I know it’s important just don’t know what it do.😢
Well it’s what turn the power for. Transmission to wheels anyways. What’s year make model u have ? Seems that’s $300 off average price. If u got to ur local mechanic u can get it done for like $580 both axles
@@RBTheMechanic Honda accord 2009. The Honda dealership gave me that quote just for the right axle.
What's a fair price to pay for this work?
Honda dealership want $349 each alxe
That’s not bad price their axle is expencive But is it labor or part or both $349?
How ever this job aftermarket I would charge 250 each
@RB The Mechanic The seal just needs to be changed.
Labor 349 for each. Not both.
Part $36 dollars for each alxe
@@terrelle5087 oh axle seal!!! Yeah I think if u buy the seal take it to ur local mechanic ka our Maxx is $150. Check with ur mechanic and make sure he install the seal propperly and know if he has done it before I know honda seals go and get pushed all the way in they don’t need to go all the way same spot where it came off
@RB The Mechanic That's the price I was thinking...
Bata bing - bata boom. : )
I have to replace my passanger side ..But my car is the Honda inspire which is the japanese my car is right hand drive
Now Shute the set up but similar
JUST GREAT BAATTA BINGGG!!!! HA!!
Great Video. Thank You
Welcome