Thanks for the video… the same engine is in the Daewoo/Chevrolet Kalos…. Did mine today with the help of your video! Although I did have to borrow a quarter inch socket set as my half inch was too big. Thanks again!
Hey Ali, This is an excellent video. But, here is something I learned. When I used Sam's Store economy gasoline for awhile I get the camshaft code. If I use regular gasoline from almost any national brands the camshaft code and check engine light goes away. I don't understand what the connection is between the two, but some gas brands trigger this check engine light code.
if they were all that easy! I have a Code 400 for restricted air flow on EGR valve. Bought new one but have to fully remove throttle body to get at it!!
And what is the problem if the hold lamp appear at speed of 80 and more then the gear stop shifting to the next speed and after awhile the lamp of engine appear too.
Thanks for video man. I have replace sensor on sam car and engine i delete faults. But after 1 or 2 days of driving i get again same error and check engine light? This is DOHC engine is there mby 2 sensors or what seems to be problem? Thanks
Excuse me, I have a Toyota car with a full gear change and it is stuck in the third gear and no one knows how to program it for the first gear. What is the solution?
Please can you help me, I have Optra 2011, I have changed camshaft position sensor, changed battery and checked all wiring but still have code p0342, what else should I do please help me, thanks
لدي مشكل ضعف عزم السيارة في أوبترا لم يفهم أحد الموضوع. لدي حساس الكام في عطل لكن كانت السبارة تشتغل بمجرد تبديل جوان كيلاس مع البستوات وقع لي هذا المشكل
chevrolet nubira sx 1.6 petrol,80kw, and same problem but i driving with check eng. , tnx for video. Does anybody have problem with drivers door windws lifter ?
This is just shooting the parts cannon at your car. Replacing parts and hoping it fixes it. If the wiring got damaged, replacing the part won't fix it.
Thanks for showing us how to locate and change the Camshaft Sensor.
No problem, glad to help
Very good video. Short, clear and to the point.
THANK YOU!!
Anytime, thanks
Thanks for the video… the same engine is in the Daewoo/Chevrolet Kalos…. Did mine today with the help of your video! Although I did have to borrow a quarter inch socket set as my half inch was too big. Thanks again!
Hey Ali, This is an excellent video. But, here is something I learned. When I used Sam's Store economy gasoline for awhile I get the camshaft code. If I use regular gasoline from almost any national brands the camshaft code and check engine light goes away. I don't understand what the connection is between the two, but some gas brands trigger this check engine light code.
I guess pinging due to bad quality fuel is causing the timing to compensate and possibly flagging the fault.
Awesome video, everything was clear and the video was edited well 👍🏾
Thanks for watching, glad it was helpful
The engine is pretty much the same with my Chevrolet Nubira/ Lacette from 2010. Will be giving this a try tomorrow.
Another amazing video 👍 thank you so much bro 🙌 love from Morocco ❤ God bless you and your family ^-^
Nice vidio, short and clear, i wanna go and fix mine.
Glad it helped
very useful video. thanks.
Glad it was helpful!
Thank you. I this its due to camshaft wearing overtime
Thanks, buddy, I will change it.
Thanks for watching
God bless you
if they were all that easy! I have a Code 400 for restricted air flow on EGR valve. Bought new one but have to fully remove throttle body to get at it!!
And what is the problem if the hold lamp appear at speed of 80 and more then the gear stop shifting to the next speed and after awhile the lamp of engine appear too.
this is very known issue with this engines. mines goes bad on 130k km. And cheap ones doesnt last long. You must use gm ones
Did you use 3/8 or 1/4 rachet
THANK YOU
Thanks for watching
Thanks for video man. I have replace sensor on sam car and engine i delete faults. But after 1 or 2 days of driving i get again same error and check engine light? This is DOHC engine is there mby 2 sensors or what seems to be problem? Thanks
Have you solved??
@@alessiomastrulli6740 yes, original sensor solved problem
Do i need to buy obd scanner if i only change chanshaft sensor?
I am confused, the DTC tels about crankshaft position sensor problem , however you are focusing on the camshaft position sensor!
i noticed the same. People are confusing between these 2 sensors namings.
I thought I was the only one who caught it.
Good day bro. My chevy is blinking only the hold.. What is the posible problem? Thanks for the answer
Thanks, have you checked camshaft senor and the wire harness
Good job.
Thanks!
What the work of PCV tapered volve and ECT volve
Excuse me, I have a Toyota car with a full gear change and it is stuck in the third gear and no one knows how to program it for the first gear. What is the solution?
I wanna know if I park on P. [] Is showing what's the correct way
Thanks
🙏
This is very common problem on this 1.6 engine. I replaced it around 250000 kms.
Oh, mine was sooner but the first one I got it from junk yard, let's see how this now one lasts
@@AliMECH 👌👍🤙
In Spanish we said “capooooooo”
How long did the first replacement last?
Myself, Had it replaced original at 25x,xxx kms five years ago. I think it has its cycle. Buy genuine GM part would solve the problem.
It was a used one, I think it lasted one and half year maybe 40k
Please can you help me, I have Optra 2011, I have changed camshaft position sensor, changed battery and checked all wiring but still have code p0342, what else should I do please help me, thanks
لدي مشكل ضعف عزم السيارة في أوبترا لم يفهم أحد الموضوع. لدي حساس الكام في عطل لكن كانت السبارة تشتغل بمجرد تبديل جوان كيلاس مع البستوات وقع لي هذا المشكل
Hi. I have chevrolet lacetti 1.6, ~150k km. It tripped the code for camshaft position sensor, but it went away on its own.
Maybe u have loose wire harnesses, when it sense any signal cut, the code comes on
Super👍🇦🇿
Thank you! Cheers!
Where can I buy obd?
It says crankshaft sensor on P0335. And yet you changed the camshaft sensor. Which is P0342. Yo changed the wrong sensor. 0:38
Changed mine today and the engine light still showing the code 😭😭
Ever figured that out?
Were is the starter motor on these engines?
Hi , I did that but now I have a code P0341 code .. can you please help?
It does not exist in my country of origin. Is there a problem if I change any Chinese brand or imitation? Thank you
chevrolet nubira sx 1.6 petrol,80kw, and same problem but i driving with check eng. , tnx for video. Does anybody have problem with drivers door windws lifter ?
Usually Windows lifter has a plastic that connected to the motor, it brakes easily
What if the code was due to a faulty sensor but faulty contacts to it. Then the check engine light will come back
This is just shooting the parts cannon at your car. Replacing parts and hoping it fixes it. If the wiring got damaged, replacing the part won't fix it.
Yes same problem
excuse me also a gas motor not only the diesel engine thanks
Show me how to replace oil transmission
if you mean for optra, i have an old video
ua-cam.com/video/QW-fboIrf80/v-deo.html
لم تقل لنا عن مشاكل هذا الحساس الذي بدلته
It's sputtering with both lights flashing
Same problem bro...
P1661 hey bro problem ?
เปลี่ยนเซ็นเซอร์ไปแล้วแต่ไฟยังเด้งอยู่เกิดจากอะไรได้บ้าง P0341
Check the wire and wire harness, they get damaged too