That was a great tutorial. I haven't done much on my P2, I've had it a few months and have only tinkered with it a little bit so far. Until now. I ended up with a project for a non-profit theatre company. I volunteer and build set fixtures. They need an "iron gate" cut from 5mm pine ply. It's 60 x 20 inches for each side plus a 48-inch-wide header. This is a very detailed project. I worked through it with the help of your video and the first half of the gate came out fantastic. It'll be about 8 hours on the machine total cut time for the three panels. Thank you so much. With some black paint, maybe the audience won't know it's a plywood cutout.
Have to comment and I am not even at the half way point ---You have given me more tips and answered all my questions in the first half than any other video/manual/you name it........THANK YOU, THANK YOU, THANK YOU.....SUBSCRIBED. I can't say thank you enough!!
I really am so so so happy that I was helpful! Sometimes I make these videos and I think "was that okay", so getting a comment like this makes me know I'm on the right path!
Watching this multiple times, I just got the P2 running and then today I set up the conveyor belt. Something about the way it’s running, isn’t printing out like I want so I’m gonna try your way. 💕 your work
Does the laser damage the conveyor when cutting? It seems the laser would hit the conveyor as it passes over a project. Perhaps it is unaffected by the laser? Thank you
The rectangle where you’re suppose to put your engraving isn’t in that rectangle. You either need to make the engraving smaller so it can fit on the work area or move it around.
That was a great tutorial. I haven't done much on my P2, I've had it a few months and have only tinkered with it a little bit so far. Until now. I ended up with a project for a non-profit theatre company. I volunteer and build set fixtures. They need an "iron gate" cut from 5mm pine ply. It's 60 x 20 inches for each side plus a 48-inch-wide header. This is a very detailed project. I worked through it with the help of your video and the first half of the gate came out fantastic. It'll be about 8 hours on the machine total cut time for the three panels. Thank you so much. With some black paint, maybe the audience won't know it's a plywood cutout.
This project sounds amazing and I am so glad I can help you create this!!
Have to comment and I am not even at the half way point ---You have given me more tips and answered all my questions in the first half than any other video/manual/you name it........THANK YOU, THANK YOU, THANK YOU.....SUBSCRIBED. I can't say thank you enough!!
I really am so so so happy that I was helpful! Sometimes I make these videos and I think "was that okay", so getting a comment like this makes me know I'm on the right path!
Watching this multiple times, I just got the P2 running and then today I set up the conveyor belt. Something about the way it’s running, isn’t printing out like I want so I’m gonna try your way. 💕 your work
thank you for watching!!!
Even Xtool couldn't help me like you did!!!!
Yay! Glad I could help.
Great demo! I was definitely curious about the tabs.
Glad I could help!
Great video! 🌼🤩How long did it take to cut a graphic of this size? 🤔
Thank you! I can’t remember the exact time, but it’s not long
Really helpful video! Thank you for sharing!
glad it was helpful!
Thank you. Very helpful
Glad it was helpful!
you are awesome! thanks for this
of course! Thanks for watching
Wondering what table you are using to sit the conveyor on ?
These tables: amzn.to/43zaQCu I have 3 of them in my craft room
Does the laser damage the conveyor when cutting? It seems the laser would hit the conveyor as it passes over a project. Perhaps it is unaffected by the laser? Thank you
Funny you mention that, I do have laser lines melted marks on my conveyor but it hasn't affected the way it works.
I don’t understand: how do you cut that without burning your rails???
oh there are burns in the rails 😬 I don't think it's possible to not burn them unless you make the cutout smaller than the rail width.
I keep getting an error that the element is placed outside of the processing area on a design that I want to engrave. Why is that and how do I fix it?
The rectangle where you’re suppose to put your engraving isn’t in that rectangle. You either need to make the engraving smaller so it can fit on the work area or move it around.
It needs to be in the lower part of the screen
That looks so fragile.
SOOO fragile!