Small Wind Turbine Making Video
Вставка
- Опубліковано 29 лис 2015
- How to Make Small wind turbine at your home. You can see hundreds of make small wind turbine videos describing how to make small wind turbine at home easily. But many of them are not very helpful. Many of them do not offer a complete guide to make small wind turbine that works as a real one.
newphysicist.com/make-small-w...
People are not satisfied, which can be understood from their comments. They are searching google again, again and again for more Make Small wind turbine videos. So I decided to build a small wind turbine and upload the making video on youtube. I went to town and bought necessary tools and parts from a hardware shop. Then I asked my friend to shoot video using my Smartphone.
How to Make Small Wind Turbine
Main Segments
Turbine Propeller
Turbine dynamo casing
Turbine Base
Turbine tail
Wind turbine propeller
Make Small wind turbine propeller[/caption] \
A wind turbine propeller converts wind energy n to rotational mechanical energy. It is the most important part of a wind turbine.Let’s learn how to make turbine propeller.
Buy a 10 inch PVC Pipe (3inch in diameter)
equally divide the edge perimeter
Cut the pipe into blades as shown in video- watch video
Make holes as shown in the picture on anything round in shape with 2.5 inches.
Then screw 3 blades to it using cycle screws.
Keep in mind
The weight of each blade should be equal.
Each blade should be positioned on the plate at equal distances.
Wind turbine Dynamo Casing
Make Small Wind turbine Casing[/caption]
Dynamo casing holds both Dynamo and Autorotation Mechanism. A dynamo is used to convert mechanical energy or rotational energy generated by wind turbine propeller into electrical energy. If a dynamo converts mechanical energy into Alternating current it is known as Alternators. Different types of generators are available in the market.
wire
A piece of pen
PVC Fitting T
Buy 2 bearings
Buy a dynamo 3V
Connect the dynamo to the PVC fitting.
Connect the two bearings to a common axis. A piece of a pen can be used as the axis.
connect one bearing to the PVC T
The bearing setup is an autorotation mechanism (yaw mechanism). It helps the wind turbine to face the wind. When the direction of the wind changes from east to west, the tail-autorotation mechanism will automatically adjust the propeller to directly face the wind to utilize maximum wind energy.
Make small Wind turbine Base
The turbine base and the post holds the propeller, dynamo, tail, and autorotation mechanism. It is very easy to make the turbine base. Buy some PVC fittings.
Elbow - 4
PVC T - 3
PVC pipe pieces
Connect these fittings as shown in the figure.
Make Small Wind turbine tail
Small Wind Turbine tail[/caption] Most of the DIY wind turbine videos on youtube doesn’t have a tail- autorotation mechanism. Without a tail-autorotation mechanism, a Small wind turbine is not complete. What is the purpose of a tail? The tail auto rotation mechanism will help the propeller to change the direction to face the wind. Th tail will force the propeller to face the wind even at higher wind speeds.
cut GI sheet
PVC Pipe, reducer
Nice video, your project in building a mini system is fun to build interest for actually powering homes. I have installed certified wind turbines powering homes and businesses in over 40 states installed in sites for almost 10 years now. Thanks for your contribution to the interest in home wind power.
thank you for sharing this video on how to make this mini wind turbine it was very interesting.. great job..
Thank you. Pls subscribe for more vids
your yaw mechanism is super. expecting more projects like this.
+laven sj thank you. Check out my latest video about concentrating solar thermal power.
beautiful
hey, I had few questions to ask regarding the mini wind turbine.
what is the type of Dynamo that you used(voltage)?
do you know any type of battery that I can use to store the electrical energy produced from the Dynamo? thanks for the video!!!!
If you are going to use an angle grinder please leave the guard on. When the blade gets pinched it will climb out of the cut and rotate the whole machine in your hand and usually make a mess of you thumb if it doesn't take it right off. Experience tells me it can be so.
I respect your suggestion. I think you are an American. When I submitted this video to reddit, it got hundreds of thumps up. But in the commenting section, they were all talking about "my carelessness about safety". Most of them were Americans. I then realized the importance of safety in american culture. Old PVC is very easy to cut, that's why I carelessly practiced it..
I will take care about safety in future videos.. Kindly subscribe to my channel. Thank you.
NICE MUSIC!!!!
So interesting... now I really want to build one..
Thank you. Let me know once you complete yours..
what did you use to connect the propeller blades to the motor?
What is the relationship between dynamo size and propeller length? Would it work if I use a 11*8 blades with a 12V motor for a turbine that looks exactly like the one shown?
Great video bro... your mini wind turbine is great...
Thank you laven. Subscribe to new physicist for more videos. Make small wind turbine..
I love about power generator and foods because they support our life.
Btw if wind make it spin continuosly, cables will tangle.
no! the turbine blade rotate only the stator of the motor (dynamo),the wires are connected to the dynamo housing,they do not rotate!
what a brilliant idea i like it.
+Dave Shute , thank you very much. Check out my latest uploads..
Aromal ji super yaar ye bhahoth aacha hai bhai
Thanks laven..
it looks so interesting. Can you please share more detail about what size of PVC pipes & 2 bearing which you used ? Thanks a ton.
+Thao Nguyen www.newphysicist.com/make-small-wind-turbine/
VERY GOOD
+waltonwayaugusta , Thank you. Subscribe to my channel for more project videos
Thank you dear friends. I'm remaking this project.. Inviting your valuable suggestions..
Ive watched as many of your videos and trying them. I am currently doing wind power project. Where I live there is no electricity. Off grid. I need to be able to make enough power for a few things and starting small. I have so many questions. Any chance we can converse via email. ? Cheers
New Physicist can you share the pipe and bearings dimentions
Hi, I'm making this turbine for a science project but I'm missing some information. Like, what is the circular object that you attatched the blades to made out of? And what size is it? And what did you use to measure the generated electricity?
@@arishaitrat8660 anything circular shape would work
Thanx bro , but i have a question , can i charge a car battery (55A)normally with this turbine?
friend, can I ask what is the output Power in Watts and Voltage?
Is there anyway to make this wind Turbine produce its own electricity? Like if I'm making a project and i want to show 4-5 wimd Turbines like that producing enough electricity to power small light bulbs
22g u are great
Now building a vertical axis wind turbine.. Inviting suggestions?
Pls make a wind turbine to recharge my smartphone.
Aru Aromal you buy car/motorcycle charger and plug it to this turbine.
thanks for your instructions
but what's the size of the pvc fittings and where can i find them?
it isn't mentioned anywhere
+Charbel Gemayel, visit nearby hardware store or go online shopping🚗
Amazing Dear
Ashfaque Ahme
very helpful
Thank you Ross. Subscribe to us for more diy videos.
RossOmega3
I have an open question, if you was in a low wind state, could it work if you? Find a way to attach a 2000 rpm 12v motor to the back of a wind turbines blades by actually running the motor of the wind turbine if the turbine can produce atleast 1kw of power per hour. if that is possible then you could have a continues power of energy 24/7 regardless of wind speed.
+Travis Ellis Thank you for your comment . Actually My aim is not to make a significant amount of electricity out of this mini wind turbine. But my Intention is to teach people who want to build a working model of simple mini wind turbine. I think this video is helpful to those who are planning to make a mini wind turbine. Am I right?
+Travis Ellis I am by no means an expert on energy but as far as my knowledge goes, when you have a 12V motor with 2000RPM that to me means that when the motor reaches 2000RPM it is at its max capacity and at that point it will produce 12V. I know some people use alternators with gears to get the max out of their wind turbines but that being said the other challenge is when converting the power to usable power in other words AC to DC you tend to lose power as well. Average household here in South Africa uses about 2kw - 3kw power.
Can you make a diy video making advanced vertical axis wind turbine?
Could you light up led lights with it?, cause i have a project on wind turbines
you can light up a led light, as per your motor (dynamo) size!
instead of the bearings what else can i use
given u the reward
+hassan ali, thank you☺
Could you give the links of everything that you bought?
What is the thing you attach with the barrings (a nail type)
hi sir.. i just want to ask how many volts did it generate depending on how strong the wind is, what could be the maximum volt it generate upon your testings?? thanks in advance..
i was looking for any enercon project when i saw yours and i decided that this is the best for me to make ☺
That sounds great bro... Actually its only a working model to explain how a typical wind turbine works. I wasn't concerned about making any output..
But you can generate 6 or 12 volts if you doubled the size of wind turbine blades. Then buy a 6-12v ac dynamo from a hardware shop and couple it with the turbine. .
I'm sure it will yield you good results. .best wishes..
+Aromal Karuvath Thank you very much it can help me a lot.. I just wanna ask if it also do with DC dynamo motor??
Yes, of course
I like your song and you make wind turbine can I ask question can you make your new next video is how to store energy in wind turbine I don't know how to make it
what is the capacity of dynamo used in the video ?
Kindly note that, this project is a full option working model of a real horizontal axis wind turbine. The motor we used as a dynamo is not efficient enough to give 6v output.
I recommend you to buy a high efficient dynamo from amazon. Thank you
excellent bro...
+Sajeesh Vk Vattoli Vattoli pls subscribe and check out my latest video at ua-cam.com/video/7tW2O-feuZM/v-deo.html
+Sajeesh Vk Vattoli Vattoli thank you. Check out my latest video ua-cam.com/video/7tW2O-feuZM/v-deo.html
I love the video but next time could you make the text go a little bit faster. The text seemed to go only one letter at a time.
Sorry for inconvenience. I'll try to avoid this problem in our next videos. Pls subscribe to us for more interesting DIY videos..
Where do I find the electric generator km volts and what can be served upon
and in addition to my question sir, i want to know what motor did u use and what are its ratings.. is there any alternative motor can i use, like salvaging any from household appliance that will rotate using wind? coz not all motors rotate when expose to wind specially miniature prototype like this to weak winds.. thanks ☺
You can buy a ac dynsmo from a hardware shop. It will give you good results, even at very low wind speeds...
+Aromal Karuvath what ratings of AC dynamo did you use, and what output voltage did you get? Can I use DC motor instead? Sorry I'm just a beginner when it comes to circuits and electronics ☺
Are propellers moving through an another fan???
Hi! Im trying to do it. Base, propeller... everything perfect.
But im not getting the right engine/dinamo. Im using a printer 12v engine... big one. But im not reaching enough power to charge my iphone or power bank. I go camping a lot and will be great to have it done to charge my devices.
Can you help me with the engine model or tipe? Thanx! Nico
Also what is the diameter and width of the pipe you are using :)
what are those things called that follow the wind that turn left to right
+will, yaw mechanism. 😀
how much power can it produce on a mild wind day?
Hy show je how's dB
How to make a home made siron
Light up NY city..
How much voltage and current does it give... Min and max
How can I charge a phone with that pls help me sir.
Just use InpliX instructions. you will make it. its so easy
Pls provide links. It would be a great help to our subscribers and viewers.
love this solution . Thanks
Could you help out with the link?
why u use bearing. please reply.
well done bro..
Thank you
What is the diameter of the piping used in this video please and the width :)
What type of bearings did you use?
It's a ball type alloy bearing. You can buy it from any hardware shop. Do not go for expensive bearings. buy cheapest. it costs around $0.5
Can you please give me the dimensions of the pvc pipes of the base? for e.g the diameter of each pipe and the connectors..
thank you
www.newphysicist.com/make-small-wind-turbine/
Visit this link for step by step tutorial
Hi, could you please tell me what that thing is that you call a dynamo? I cannot find it on home depot. Could you please give me a link?
+Aromal Karuvath Sorry if I didn't make a myself clear, I meant the thing that allows the top part to move freely, what is that and where can I get it?
+mamamia13 You will get two bearings from a hardware shop. Right? Then connect those bearings to a common axis. Then buy a 'T' PVC fitting. Make sure bearings will fit in to the one end of T PVC. Connect dynamo to an end and tail to the other. I think I have demonstrated it in the video. Is it confusing?
+mamamia13 Anything can be used as an axis. I used a piece of ballpoint pen. Fix bearings on it tightly. Yes it's simple but it is little confusing. Refer this link for text guid www.energy-physics.com/how-to-make-mini-wind-turbine/
+Aromal Karuvath Thnak you very much
You are welcome. Keep in touch for more Projects like this...
what can i use to store the electricity
Kim Cheung, Use small rechargeable batteries. Use high performance dynamos to recharge larger batteries.
best wishes.
New wind turbine project with 12v output is underway. subscribe get it directly in your homepage.
thank you.
I constructed a mini wind turbine but it's not generating light. Can some please tell me what d problem is. I used a 12dc dynamo and a rechargeable lamp bulb as d bulb and it's still not generating. If I use my hand to turn d dynamo when it's connected to the buld it wud generate light but when I mount the blade on d dynamo and d blade is rotating fast it's not generating light. I also interchange the wire connections, it's still not generating. Can someone pls help me and tell me what to do. It's urgent.
I guess your motor doesn't produce enough energy when it rotates slowly.
Thanks for all of you
how much watts does it make?
Can this energy be stored in batteries
Yes.. You can.. But this hawt output is very low. If you use high performance dynamo and even bigger propeller in your project you can Recharge your batteries.
Es sea ketna voltage tak nekal sakata hai
What is that dynamo
I was using a DC motor 12v but couldn't light a LED....plzz help
Can it generate up to 12v?
yes it can but wind mill size should be big!
Yes correct. Efficiency of dynamo is also important.
what kinda generator did you use?
no generator used, its a mini motor, it can generate power!
how much electricity does it produces
The project like this step by step is described on the Avasva website and many more plans you can find on that website.
WHat kind of motor is that?
इसमे कितनी वाट कि मोटर लगाई है
How much does it cost to make one?
I made it myself thanks to INPLIX website
dynamo instead batary ?
+adem asdas you need a dynamo to produce electricity
What kind a motor is he using
Thank you for your comment. Its not a dynamo, but a DC motor from old DVD player. A DC motor can also perform as a DC dynamo as well..
where did you purchase the propeller?
I made it myself. Just watch video bro
Thanks
lol
How's it bro?
how much current can it produce??
It depends on the dynamo you use. Buy a 6v-24v high efficient dynamo from amazon if you can afford. Thank you.
You will only use the "hand cutter" one time... Then you wont have hands to use it anymore
wer is the pozitif+
I bought instruction from Avasva and I build it very very cheap.
Whats the name of the music?
What song pls
I did it with Avasva plans.
how do I charge my iphone with it?
Heidi Dumesich you need to add a 7805 voltage regulator and 2x 22-33uf capacitors to the circut and then just connect the cicuit to a iphone charging cable!
lmfao!!! whoever edited this or made this mustve been laughing cause of how easy it is!!
Direct drive from motor is not sufficient. Just saying.
You are correct.. I was just expressing the idea of wind turbine. I hope it did well.. Am I right?
We need super fast turbo air cooler no slow
do it yourself , go to inplix page and learn how .
m.ua-cam.com/video/d7ujZv-j_2U/v-deo.html
Watch making of vertical axis wind turbine!
Thank you
र
energy-physics.com
Not working 🤔
Sorry visit newphysicist.com instead ❤️
:/
इसमे कितनी वाट कि मोटर लगाई है
Hey you need to write in English so that anyone can understand