Your q50 naturally aspirated which means no forced induction all engine and no need for a heat exchanger. This q50 in the video is a 3.0 twin turbo which needs a heat exchanger to cool the air to liquid.
Yo boss , I recently check your video on your q50 heat exchanger, no overheating with either radiator or head exchanger on q50 , because u didn’t use the pressure bleeder tool , I’m going to install my heat exchanger next weekend. Let me know .. I would I appreciate that
It all depends on the dealership you go to I hear but I’ve taken my car to get warranty stuff with the lower down pipes and muffler delete and the service guys didn’t say anything to me I had my water pump and oil pan gasket resealed all under warranty
@@SvperDvperProdvctions oh no yeah I did hear you on the video say that you did bleed it, I was just asking because I recently got a BMS Heat Exchanger installed as well, and a few days ago I did a mini pull and it drained all of my coolant smh
On my 2018 redsport I have the ams original heat exchanger not the new race one. Idk about this car, it's my first turbo car. I live here in California and when its around 90 95 if I give drive It hard it still gets hot on my temperature gauge 🤦♂️
Try to bleed your coolant system on the turbo system and regular because here in phx which it gets like over 100 all the time my car never over heats and that ams one should be doing the job too
What year is the car and what engine is it? I’m trying to find a heat exchanger for my 2014 3.7 base model, but everything i can find is for the 3.0t.
Your q50 naturally aspirated which means no forced induction all engine and no need for a heat exchanger. This q50 in the video is a 3.0 twin turbo which needs a heat exchanger to cool the air to liquid.
did you buy the inlets
Yes I have bms inlets and Intakes
@@SvperDvperProdvctions your car looks insane 🔥🤙🏼 , hope to be like yours one day loll
@@alexaguilar2851 appreciate it watch most recent videos to see how she looks
How i can modify my q50 sport 3.7 2014 .
Gonna be expensive
is this a sport model bc I heard you have to relocate the oil cooler if it is
Not sport model
By any chance do you know if it will fit the 3.0t premium or any 3.0T
Trust it does
Bro what lip is that one and where did you buy it looks great ?
You can get it from eBay just search up your vehicle make & model and then type lip at the end
would you send the link ? i tried on ebay but says it doesn’t fit the redsport...
conceptzperformance.com/burger-motorsports-bms-high-capacity-intercooler-heat-exchanger-infiniti-q50-q60-3.0t-silver-sport-bms-hcih-v37_p_47309.php
I ordered it from there concept z performance they are good guys and local here in phx AZ if you’re from here
Yo boss , I recently check your video on your q50 heat exchanger, no overheating with either radiator or head exchanger on q50 , because u didn’t use the pressure bleeder tool , I’m going to install my heat exchanger next weekend. Let me know .. I would I appreciate that
So far how is your experience with it? Thinking about getting this along with racebox. I already have FI CBE and LDP
Must do mod if u plan on tuning it
U know if this voids my warranty ?
It all depends on the dealership you go to I hear but I’ve taken my car to get warranty stuff with the lower down pipes and muffler delete and the service guys didn’t say anything to me I had my water pump and oil pan gasket resealed all under warranty
you didn't lose any coolant after those pulls since you recently installed it?
I did bleed it just didn’t show me doing it
@@SvperDvperProdvctions oh no yeah I did hear you on the video say that you did bleed it, I was just asking because I recently got a BMS Heat Exchanger installed as well, and a few days ago I did a mini pull and it drained all of my coolant smh
@@luisiferz oh okay and I’ll check the level again thanks for the heads up man and when I checked it at the end of the day it seemed good
Do you still have the bms installed ? Is the car still running good ?
@@joshuasandoval3753 I still got mine & it’s running good
Yo how’s it holding up?
Great man just about to hit 70k miles on the car and still running super strong hanging out the gap
So after installing it, you just fill up the reservoir to the max line, then turn on the car and keep filling until it stays at the max marker?
Yes but after further noticing you don’t get the air out till after a few days of driving it
On the heat exchanger reservoir side
Got it, thanks for the vid!
@@David-de8wm stay tuned for a video soon I’m finishing up the tune today as we speak she’s getting fast
@@SvperDvperProdvctions gotcha
On my 2018 redsport I have the ams original heat exchanger not the new race one. Idk about this car, it's my first turbo car. I live here in California and when its around 90 95 if I give drive It hard it still gets hot on my temperature gauge 🤦♂️
Try to bleed your coolant system on the turbo system and regular because here in phx which it gets like over 100 all the time my car never over heats and that ams one should be doing the job too
Hows your heat exchanger going ???
One of the best mods for the Q keeps car cool and no issues with it at all
@@SvperDvperProdvctions what also you got done I yets got my q50
How long did install take ?
Like 3-4 hours wasn’t too bad
Did bleeding it like that worked fine?
Yes it did no issues at all
Mbn to not worry about tires
Lmaooo
What brand heat exchanger?
Burger Motorsports
Would this fit the awd q50 3.0t?
It should as far as I know
@@SvperDvperProdvctions thank u i was looking to just get a jb4 but my homie from Infiniti was telling me might not fit thanks for the reply !
@@guava24k96 get a ECUTEK tune not a jb4 unless you still have warranty then yeah do a jb4
@@SvperDvperProdvctions haha was just talking to my boy about ecutek ok i shall go ecutek 🙏🤙
Super helpful video but I’m a little dizzy from that cam moving.
Heat exchanger still runing good ? I don’t have a compressor so might try ur way
Naw found out you need ac compresor or scanner to run the water pump
How much coolant did you have to add?
Swear need a answer cause I had to keep on adding until it took a lil over 1 bottle
Just needs the tune
Great video fuck wit it hows your temps so far? Right i dont got a heat exchanger in 30 degrees im running 180-200 degrees
Definitely get a heat exchanger the highest mine ever gets now is 115
Lookin mean
What coolant do u use?
Some coolant from oreilys and it was the blue stuff