3:28 I have the same problem with my Nazgul Evoque. I have spent money changing parts, and it keeps giving me problems. Doing troubleshooting, I found that the screws holding the DJI O3 were causing a short.
Nice video, but what frame rate were you using when flying? It seems like 30fps if so you should bump it up to 60fps or make sure when editing you are exporting at the same frame rate that you used per video. I say this because it looks choppy in this video and in your previous video too. I experienced this myself also and caught it.
Thanks mate! I do film on my GoPro 60fps but on my cameras 25 fps & I edit my videos on 25fps timeline. You think the timeline settings is the problem?
Yea I'm not sure how it will work if you changed it to 60fps on a 25fps video but you can always test it out by exporting multiple videos with different sequence frame rates.. and you can find it in sequence settings if you are using premiere@@Kofithetraveler
@@Kofithetraveler Best to use 50fps on your GoPro if you edit in 25fps, it divides the frames perfectly then. 60fps is best used in 24fps timelines. Hope that makes sense man! 24 vs 25 depends where you are in the world. 24fps for US, 25fps for UK & Europe etc. I am in UK, if I use 24fps here lights and screens will flicker.
What made you go back to Goggles V2 instead? I much prefer my V2s but I only use my goggles 2 now because I spent almost 800 quid on them by the time I’d replaced straps and foam and bought additional battery. I really get annoyed with them though because it’s hard to find the correct focus so spend ages in the field when ready to fly just fiddling with finding the right focus. Then as soon as I put them on my face and take off they start steaming up almost instantly. Never had any problems with the V2s. I think I should just purchase the iFlight Crystal HD & put the goggles 2 back in their box.
what happen to your nazgul? it looks like it failsafe? dont forget to check your country frequency, when you are travelling, in the europe i believe the frequency must be 868mhz while on vietnam must be 915mhz because vietnam are on ASIA region....
I think so too. But iflight said it was my fault 🥹. And I haven’t even got the time to check it. But I will sure get back to you. Work got me busyyyyyy
Nice format and flying man. Tbh... aint no comparing the two. Total different flying abilities bewteen the two for totally different purposes . You dont freestyle a cinewhoop nor do a one take through a building with a 5 inch haha. But yeah you said it. 😂 keep em coming. Subbed and ps.. if youre ever ready. Move on over to the kiss ultra side and feel what really good flying feels like..locked in butter you'll see
ah you didnt see the drift mention video from mr steele he did a insane onetake with a 5inch i really want to try a kiss fc but they are soo expensive im waiting for the kiss ultra aio :P
@@Kofithetraveler along for your journey mate haha. Indeed hard to comparing the two if not inpossible. But indeed the cinebot30 is a nice quad indeed! Keep em coming!
@@bluefpv3263i think i missed that one yes. But Mr Steele is Mr Steele haha. Still wouldnt advise anyone to do a (indoor) onetake with any 5 inch setup . Kiss ultra is next level mate. I swapped all my betaflight boards for ultra V2. I think you can wait a looong time for that ultra AIO. Sadly. I would like one too for my tinywhoops haha
"It can literally do freestyle"... then you crash into a tree and don't do acrobatic moves after that?! I have a cinebot30, and it can freestyle, but you are having trouble! Maybe run a few batteries before making a video.
Great video. Great to know Cinebot30 is great coz I own one 😁. We all love validation for the things we've spent money on right.
Haha exactly! For me it’s a beast 🔥. Just Look at how it performs
flies like crap compared to open prop
murphys law for drones: everything thats lose will be chopped of by the propellers eventually
Haha i had to learn it the hard way 😅
3:28 I have the same problem with my Nazgul Evoque. I have spent money changing parts, and it keeps giving me problems. Doing troubleshooting, I found that the screws holding the DJI O3 were causing a short.
Nice video, but what frame rate were you using when flying? It seems like 30fps if so you should bump it up to 60fps or make sure when editing you are exporting at the same frame rate that you used per video. I say this because it looks choppy in this video and in your previous video too. I experienced this myself also and caught it.
Thanks mate! I do film on my GoPro 60fps but on my cameras 25 fps & I edit my videos on 25fps timeline. You think the timeline settings is the problem?
Yea I'm not sure how it will work if you changed it to 60fps on a 25fps video but you can always test it out by exporting multiple videos with different sequence frame rates.. and you can find it in sequence settings if you are using premiere@@Kofithetraveler
@@Kofithetraveler Best to use 50fps on your GoPro if you edit in 25fps, it divides the frames perfectly then. 60fps is best used in 24fps timelines. Hope that makes sense man! 24 vs 25 depends where you are in the world. 24fps for US, 25fps for UK & Europe etc. I am in UK, if I use 24fps here lights and screens will flicker.
What made you go back to Goggles V2 instead?
I much prefer my V2s but I only use my goggles 2 now because I spent almost 800 quid on them by the time I’d replaced straps and foam and bought additional battery. I really get annoyed with them though because it’s hard to find the correct focus so spend ages in the field when ready to fly just fiddling with finding the right focus. Then as soon as I put them on my face and take off they start steaming up almost instantly.
Never had any problems with the V2s.
I think I should just purchase the iFlight Crystal HD & put the goggles 2 back in their box.
they arent hard to focus, you just don't know how to do it. Look far, very far and focus like that
I am bit "car senstivite" threfore I will never start my drone from roof of my car. your vid makes me bit nerous because of this fact 😀
Haha same but I think the drone is good. But I wouldn’t dare to land on the car tho
Which is the cell voltage you landed you cinebot30?
very cool vid 👍
Thanks for the visit 🙏🏿
Is that Romney Marsh? Looks like it... If so, you're super near me.
Where do you live ?
@@Kofithetraveler Winchelsea
I'm watching your video from Brazil 🇧🇷
Thanks for tunning in brother!
Thanks bro 👏👏👏
what happen to your nazgul? it looks like it failsafe? dont forget to check your country frequency, when you are travelling, in the europe i believe the frequency must be 868mhz while on vietnam must be 915mhz because vietnam are on ASIA region....
I think so too. But iflight said it was my fault 🥹. And I haven’t even got the time to check it. But I will sure get back to you. Work got me busyyyyyy
Nice format and flying man. Tbh... aint no comparing the two. Total different flying abilities bewteen the two for totally different purposes . You dont freestyle a cinewhoop nor do a one take through a building with a 5 inch haha. But yeah you said it. 😂 keep em coming. Subbed and ps.. if youre ever ready. Move on over to the kiss ultra side and feel what really good flying feels like..locked in butter you'll see
Hahaha that’s for the sub mate ! And I totally agree with you. Those 2 can’t be compared but I just feel like the cinebot30 is so so good 😅
ah you didnt see the drift mention video from mr steele he did a insane onetake with a 5inch
i really want to try a kiss fc but they are soo expensive
im waiting for the kiss ultra aio :P
@@Kofithetraveler along for your journey mate haha. Indeed hard to comparing the two if not inpossible. But indeed the cinebot30 is a nice quad indeed! Keep em coming!
@@bluefpv3263i think i missed that one yes. But Mr Steele is Mr Steele haha. Still wouldnt advise anyone to do a (indoor) onetake with any 5 inch setup . Kiss ultra is next level mate. I swapped all my betaflight boards for ultra V2. I think you can wait a looong time for that ultra AIO. Sadly. I would like one too for my tinywhoops haha
@@ConjoFPV well there are rumors about a kiss aio this year
and ye i dont fly my 5inch inside :P
With naked hero would you suggest this drone or maybe a Pavo 35 or speedy bee as my hero 11 is not naked yet. Very nice edit and flying!!❤
get a 5"
What battery are you using for the 5 inch?
why does that matter?
are you flying Cinebot30 with full gopro ?
No, naked GoPro 9
Bro nice content! Do you think the cinebot30 6s can fly with a 6C 1300mAh lipo???
Here's something actually helpful: look at the motor max lift, do x4 then subtract frame weight. That is the absolute max it can lift
you got roots in Ghana?
Yess 😅
Wana learn from u
just fly
this is unfair because you are comparing a 3" versus 5" drone
Makes sense but I feel like the cinebot30 is very good and strong enough 💪🏿
"It can literally do freestyle"... then you crash into a tree and don't do acrobatic moves after that?! I have a cinebot30, and it can freestyle, but you are having trouble! Maybe run a few batteries before making a video.
Iflight sucks mine fell out of the sky
And walking sucks because people trip. Does that mean we should stop walking because of a couple dumb people? no
i tink lol