will they run? yard sale tiller and mower
Вставка
- Опубліковано 15 жов 2024
- went shopping during a lacal town wide yard sale but the weather kept allot of them closed, l did find a roto tiller and a push mower that need some help. lets see if they are worth fixing.
Hi Mustie1! I am a retired commercial refrig and A/C mechanic (and you bring back many wonderful memories) What I want to convey to you is that any refrig/A/C unit that has been on i's back, sides or any non-normal position has a good chance of oil clogging up the suction intake tube in the compressor. Since a piston cannot compress a solid, it will lock up and become useless. If you have questions, i'm here to help.
Hi Mustie...here's something you can do with your junk mowers...pull the motor off it. Make a plywood table slightly larger than the mower is. Make a frame with 2x4's and screw them to it, so you have a wooden cart with 2x4 sides. Bolt it directly to the deck of the mower. Cut out for the handles in the back area. Paint with an oil-based paint.
(you may have to space areas so you have one bolt on each corner.)
Purpose: the inside of the cart area has a LOW CENTER OF GRAVITY. The lawnmower was designed to be on the ground...so you can transport a large poundage of weight without it toppling over, as in a wheelbarrow). I've carried bags of fertilizer, bags of cement, bags of dogfood, packs of roofing, etc. I once carried an outboard motor fro my car to my boat and I built one for a mechanic buddy, that used his to carry engine blocks.
The uses are endless! It helps to have holes drilled in the side rails so you can rope taller things down. Folks will give you junk lawnmowers, but they're tickled to give you $30.00 for a carry-all. you can make for pennies out of scrap 5/8" OSB plywood and one 2X4.a little hardware and some paint.
((I once pulled one of the old type small wheelbarrows apart, because the tubular frame and wheel were shot, and made a DUMP-BED with it onto an old mower base. worked great to mix cement in with a hoe & roll it to where you were needing the mud and pour it directly from low to the ground without worrying about it tipping to the side))
Folks see them and scrap DIY one themselves and find that they are most handy!
I hope you get one of these going for yourself!
AGAIN, I VERY MUCH APPRECIATE YOU MAKING THESE WONDERFUL VIDEOS !!!
Bill, from Tn. 🇺🇸
Im 12 i cleaned a briggs and stratton plastic carburettor which was in my grandparents lawn mower im so proud!
Good work. I wish mustie would have been on the internet when I maintained my grandpas garden machines. Or indeed that there would have been internet at all.
good job! i don’t like those plastic carbs one time i was trying to start my friends lawnmower didn’t start in 2 years and the carb flooded through i’m the intake and caught fire and i’m only 15
I’m 14 and I’ve been working on tractors right now I’m putting a v8 in one
Hands on training
I’m 12 and i work on my John Deere 212
I always enjoy the "will it run?" videos, even if there is a basket case or two. The suspense of the episodes is riveting!
I agree with Randy!
Hey - quick note to Mustie1 to say thanks for all of these videos. After watching many of these, I was able to fix a pressure washer that had been giving me trouble. Since the carb seems to be the first place to check, I took it off and gave it a good cleaning. After that, it worked fine but ran rich. Again, your videos helped me understand that I had hooked a linkage back in the wrong place - choke always on - so 15 min later it was all running perfectly. Seriously, thanks again!
Using Mustie as my motivation, I got a mower running yesterday that had not been started in ten years. It was frozen solid and would not turn. I put some oil in the spark plug hole and used a breaker bar with a socket to force it turn over. The carb looked ok so I put some starting fluid in it and it fired on the first pull. Runs great and I mowed s thick weeds with it. Thanks Mustie
Hi Mustie. I have used Gunk carb cleaner for over 20 years. Still the same can. Works just has god as when new.
Simon from the UK here, well my brother.what a pleasure it is to watch you at work and teaching us all in a manner which we can understand. Love your dog and my Jack Russell likes ice-cream as well. Pleased you found a back pack blower as I've got one that is playing up. See you on the next one.😋
Nice score on the tiller. I picked up a 1960’s tiller a few years ago. The thing is built like a tank. Also snagged a newer troy bilt mower from my bro in law that was completely rusted out with a 6.75hp engine that was a perfect swap for the one on my log splitter. It’s amazing the kind of things you can find from people who just don’t know how to work on these things. Love your videos btw. Keep ‘em comin’
I used to flip mowers as well-they are so cheap at the store, that folks don't want to pay for used units-love your videos-thanks!
I would have to say that your cameras are much better than in the past. I can watch full screen on my 27" monitor now and it looks great.
Best channel on UA-cam! Love it. Thanks for doin it.
Mustie1 been watching some of your older videos like this one. I get a lot of old gas as well I got a 5-gallon bucket that I save it in (Unless it's really old skunky gas)Then when I am ready to fill up my own gas cans, I run the old gas through a few extra large coffee filters, being careful not to stir up any water that's settled out. then I just fill my gas cans up about 1/3 of the way and go top them off with reg unleaded gas. I have never had any issue using up old gas this way. I just make sure I don't use it in any 2 cycle engines. mowers and edgers run on it just fine. I consider it Free gas
I trash picked an old Craftsman eager 1 that had a self propel system...it didn't show how ff'ed it was until I had tried to get it running...sheared keyway simple...oil sump had a hairline crack near one of the mounting bolts to the mower deck didn't notice that until I remade the sump gasket and put fresh oil in it... New head gasket to boot. Needless to say if I didn't actually need the mower myself it would have been a parts mower...spent nearly 100$ on it to get it running but it does indeed eagerly cut my grass now with no issues. All thanks to the confidence your channel has given me to tackle some small engine repair work. P.s. I have an old single blade plow with a Clinton engine on it...that's my next project 🤗
I won't go into the details for the sake of brevity, but thanks to you and a couple of other guys on UA-cam, I was able to fix my lawn mower when it quit in the middle of cutting my lawn. It would have been out of service for four or five days without learning from your videos. Thanks a lot!
On the AC unit "that season is coming very shortly" Here in western Oklahoma that season has been here for a month or so, lol. It's been in the 90's every day for a few weeks now. I will say though I'll take the hot weather as opposed to your winters any day! I used to live in Minnesota, I hate winter! I have the exact same window unit and it works great! Great video!!
when a week gets too long of a wait I search for the old gems like these.
You've answered the question I've been wanting to ask for the longest time about whether you use a mic or not, because I've never seen you wearing one. Your voice and ambient sounds seem to always be clear and natural.
And seeing Lilly dog enjoy her ice cream was worth the price of admission right there. :o)
It's the videos like these that you can watch for hours!
Thanks Mustie.. made morning. Also thanks for talking about the waste liquids. Down here in Tennessee many people just spill their waste on the ground or on the side of the road.
Sound is way better then the other camera, with loud noise it made this electric tweet sound.. keep up the good work!
That windscreen may have been a pain to fit, but it was really worth it. The Li'l red bus is looking great, and it seems you;re having fun with it! Love your vids Mustie, always look forward to them.
Enjoy your videos. Also you may be able to buy regular gas with out alcohol at smaller airports. Older small planes often require that type of gas.
Those AC units are pretty decent. I've got a extremely similar model. It's almost 10 years old still works great. Kind of nice it has a automatic option, also a timer which is nice. So you can set the temperature that you want set it for 8 hours. And when the 8 hours passes it will automatically come on and start cooling the room down. Pretty nice. Came with a remote too that had a magnet on it. Other people have mentioned it but I think if you sit in AC unit on its side like that You need to let it sit in the correct orientation for a few hours to let the oil settle back into the compressor
Thanks for the info! I just bought one of these for 20 so fingers crossed it works for a good while. Much needed in texas!!!
But musty! It’s not the repetitive reassembly of a carburetor we crave? It’s your RIVETING WIT AND COMMENTARY 😳❤️🇺🇸
We have seen enough carburetors cleaned...thank you.
Agreed, I always enjoy the commentary.
Can never see too many carbs cleaned
Eric Hoskinson qup was the dtime jejdjngbgbgbgbbb
seems like there's always a tip or trick that comes out
I have the same lawn mower, but with RWD, maybe 15 years old and still running with hardly any demand for repairs except oil change, sharpen the blade, and spark plug change out. Sometime I get a little miss and I just add Sea Foam to the Crankcase oil and fuel tank and the miss clears itself and off I go. You got a good eye finding stuff wrong. YOU CAN DO IT!
Hi Mustie1, just scored a free power washer because owner didn’t want to pay the price to get it running again. It clearly had sat unused for a while. So, went into full Mustie mode. Emptied tank into large glass container and must have been half a cup of water at bottom. Removed float bowl of nice Honda engine and bowl was heavily rusted and eaten up inside. Found a genuine Honda original replacement carb on Amazon for $18 and decided cleaning old one was wasted energy. Purged out fuel lines and stop cock, slapped on new carb, dried out the tank, added clean gas and she runs like new. Pump was recently replaced so it was excellent. Probably why the owner was done spending money on it. I stripped the bypass valve anyway and cleaned. Total cost about $20 tops. Following the Mustie Method works. I like the “will it run” items as that is what most people are faced with. I like to hear your mental process as to whether continuing is worth it. Even duds have learning value! Best from Texas!
I am now happily retired and spend my days scrapping and now, repairing small engine equipment, and I work with what I find. Thanks for all your info and videos.
I never get bored watching you disasemble a carburator, clean it and put it back together, keep it up
Enjoy your patience. The bass basscat boat was my favorite
Mustie Have you ever tried snap on hose clamps ,they are awesome . It stops the flow and both sides are flat so when you compress it, you won’t ruin the hose.
Mustie, you should totally use the mower engine to rebuild that gokart frame you got earlier. I know it's a vertical shaft, but that's the fun. Use a twisted pulley setup, or a double pulley setup like the fan belt in the old Corvair's if you want it to be possible to add reverse or something. It would be a really cool thing to see made, and probably pretty fun to build too!
I had to check my garage - I have both this tiller and mower. The tiller is missing the drag bar too. The plastic gas tank cracked and Briggs wanted like $70 for a replacement so I got a new engine at Harbor Freight with a metal tank that actually runs better for about $90. The mower on the other hand has been very reliable other than leaking oil all over the place. It fired up with 3 year old gas on the first pull but last year I thought I killed it when I ran it out of oil from the leaks. I filled it back up with oil and it runs but not as peppy as before so I probably did some internal damage. It has sounded like it was getting ready to throw a rod for several years so I may be able to milk another year out of it before it dies. I already have a Harbor Freight replacement ready. I have the high rear wheel model and the deck is all steel unlike the new ones where the front wheels on mounted on plastic so I’d like to keep it running.
I'm far from as skilled as you are Mustie. But I just had to clean out a carb on a pressure washer for a friend and it looked identical to that one. Picked up a rebuild kit for a briggs for 9 bucks and kept it running while the owner was ready to write it off. Feels great to keep things going. The problem with it was that the float needle seat had deteriorated into itself and was blocking gas from coming in at all. Because of that, I had to buy at least the seat but the gaskets were so hard, it didn't hurt to replace them.
Good deal on the tiller. It should off set your losses on the push mower. Another bonus was the awesome deal on the A/C unit, so you didn't get hurt. Cheers! Zip~
great videos found your channel a few days ago,i dont know if you have ever used starting fluid to shrink o rings its not a huge differance but can can you by somtimes in a pinch just spray them down ,great channel again
We had that same tiller for 20 years before moving to raised garden beds, it always started on the first pull.
Great video! At least the tiller is good. I can't believe you only get 50 bucks for a mower. One like that running and serviced I usually get about 150 for. Maybe it's just my area.
Saw Mustie uploaded a video, guess my morning just got better and better.
Just ForHackz same
Clear plastic won't kill those weeds along the fence unfortunately. You just made a nice greenhouse for them to grow in!
No freebies. Absolutely love your videos. Great job
Hey Darren.....please someday do a preassure washer pump fix for us idiots that didn't purge it for the winter.There are some on UA-cam but I only would trust you.Or at least explain what breaks on the pump.....Thanks # 614 here thumbs up
And I'd like to thank you for your videos I started my own lawn mower repair shop thank you
congrads roger
Around here , the gas will pull the moisture in and cause many problems on small engines . I now drive about 10 miles away to buy premium no alcohol gas . If you have to use gas with alcohol , use Star Tron additive . Works well . I can't believe my neighbor ladies listened to me and ran all the gas out of their mowers at end of mowing season last year . I have not had to tear any carbs off of their mowers this year ! Did you ever notice how many people that have front tine rototillers do not have , or know what a depth regulator ( skegg ) is . I borrowed my neighbors and it did not have one , so I made one for it . I noticed it is missing now . At the least , I would like to have the 1/2" X 3" steel back !
I think they have no idea how much easier tilling is with one . If their feet are hitting it , they are operating quite strangely .
Awesome wrenching vlogs. A man can always learn a few good tips..!!
Thank you for freely giving us your knowledge. Much appreciated
First time I've seen an AC unit up close, Nice score. you don't see many of them here in the UK, $9 a gallon is what we pay for regular gas here, it really hurts the wallet to fill up.
A good substitute for your expensive race fuel is 100LL from your local airport. It is usually a dollar or two more than e10 unleaded but doesn't go bad for years. Generally airports have a self serve pump on the ramp especially so with uncontrolled airports. If anyone asks just say you are buying it for a plane hangared at your home.
Love the bonus content at the end of your videos.
Especially if a pup cup is involved!
But Im kinda sad he is not going to fix the mower... Ive seen things a lot worse on this channel. And they ran afterwards...
I always check yard sales. Win some lose some, that's fine. Sell one you fix and get the parts off another that's no good.
.....ice cream and doggy bones for your pooch? Gotta love it.
Thx
Suggestion: Set up an Amazon affiliate link. Put all your tools in your video description that you get inquiries on linked to Amazon and you will get a percentage of the sales plus your viewers, like me who haven't seen every single video and thereby missed the details on your ultrasonic cleaner, will be able to view all the details and purchase one if they wish. Simple copy and paste once you have prepared a list is all you need to do to add to the video description on each subsequent video. Personally, I would like to know the model number of the ultrasonic cleaner so I could determine if it meets my needs. I do a lot of small and large equipment repair and maintenance and I find a wealth of information in various creators video descriptions. P.S. I really enjoy your channel. I have picked up on a LOT of tips and tricks!
Keep up the good work, you are much appreciated!
STA-BIL is a cheap alternative to racing fuel. I put it in my 5 gallon gas can every time I fill it up... Love the videos, keep em coming.
I love your approach to fixing stuff. I also collect stuff but in central CT.
A/C unit. Will it run?
Ok so I’ve hooked watching your channel I love how you explain everything its to the point know that I buy old lawnmowers and jet skis so I can work on them with no knowledge at all just what I learned from you cause you look so happy doing it thank you for the videos and help
I sold that same mower a month ago for $150 only difference was it was green and had a Briggs, but it was the same exact frame and that one would go about the same price. Thats NJ prices, my Uncle says in Geargia mowers are even more. At sears that style mower, which is now built much cheaper is still $177 new and that older one had a stronger frame and fatter wheels. The newer ones, the frames are thinner, the wheels are thinner, so they get a cocked look on the new ones. I have a blade adapters and cables laying around, so for me here $10 in $140 out that mower is still worth fixing. A lot of people prefer a nice compact lightweight pushmower and those older AYP models were built strong. I don't think the one I had even had the rear striper skirt still on it. Plus other than the few minor issues the thing looked good. You may want to repair it afterall, I don't see why you cant get outleast $100 for that mower vs someone paying $177 for the flimsy models they sell now at sears.
A mustie1 video with a cliffhanger..... excellent. Your videos are a highlight of the week.... never before has someone moving some cars around and then playing with a dog being so entertaining
Loved the ending of this one. Kinda like the old hitchhiker movies: leaves you hanging as another victim approaches.
Big win on the tiller..and sometimes that happens w/the mower, been burned myself by what I didn't see until I got into it. Actually need a couple parts off 1 of those myself for another, so would use it for that. And it might be the only straight Craftsman wheels you run into this year! Nice pickup of the backpack blower after taking Lilly for ice-cream, those always sell well in the fall.
Nice to see that the Craftsman tiller was made in the U.S.A. We don't build anything here any more.
Heck yeah just got off a 12 hour night shift and I come home to a Mustie video. Thank you
I find my self watching to help me learn and fall asleep so relaxing
The best thing I have done for mine and friends window units it to give them a good cleaning on the evap and condenser coil. The go to Home Depot, get a roll of screen material and a 6 pack of little ceramic magnets. Cut the screen to drape over all of the air intakes for the condenser and use the magnets to hold it in place. Then I just pull the screen off once a month and hose it off to clean it. Its amazing what it catches that would normally be starting to clog the condender coil. And it keeps the bigger leaves and twigs from falling in a clogging the chassis drains.
If you forget to clean the screen, the ice on the coil will remind you.
It'll be the outdoor coil starved of airflow, so It'll either blow warm or go off on high pressure or temp on the compressor if it has those safety's installed.
Hey! Instead of your racing fuel, I use 100LL AvGas. It will no5 tarnish and lasts forever without going bad...plus no ethanol!
Hi Mustie . You need to let AC units stand if you have had them on their side. This allows the compressor oil to settle
Thinking about the camera issues I’m wondering whether a GoPro or other similar sized action type cam may be more suitable for getting into all those tight areas and producing clearer images and sound. Might be worth seeing if you can borrow one to try out and doing a viewer poll, i’d certainly contribute towards one for the content you produce.
We had that same AC when we had an apartment. Kept 1200 square feet nice and cool in the muggy midwest summer.
Hey this is bad boy just a tech tip if you got a really nasty engine and you really don't want to put all those chemicals on the ground that you get in the cans of Gunk and what have you what you can do is get some Dawn dish soap in a spray bottle and some warm water and spray it on your dirty engine I mean really spray it on there and use your garden hose and it will come out like it came from the factory clean as can be and it's better for the environment I've done numerous engines that way and that hasn't failed me yet bad boy out
We usually always ran mowers whackers and chainsaws empty before storage. IS that good practice? Our mowers only took about ,10 of a gallon anyway. The riding mower was a little worse.
You know? You need your own TV show. I can't believe how interesting you make these videos.
Sold..... If only u lived closer... It's Alive ready for work.. Nice work as always.. time to go to work my self...
Just a piece of advice from someone who learned the hard way - always place compressor driven units (A/C, refrigerators, freezers, etc,) in their upright positions for a few hours before starting to allow the oil that is in the system to settle back into the compressor. Failure to do so could fry the compressor if it hydrolocks (happened to me on a brand new unit similar to yours). Obviously you dodged that one...this time! lol
John Tilson we lost the Yu-Gi-Oh conditioner that way ourselves.
Yeah, that little mower sure looked nice at first glance. I guess if you like front tine tillers that's the a real winner. Thanks, Mustie!!
I ordered a ultrasonic cleaner the same make as yours just not as big hope it works as good as yours cheers .
the heat helps greatly
what temp do you set it at thanks Joe
I have the same engine on my log splitter as you have on your tiller. This video is very informative.
Lamans Waters It's also the same engine used on my wood chipper/leaf mulcher (only difference is the tapered shaft crank used for the impeller/Flywheel)
I had (well, I still have...) a mower similar to that (same engine I believe? - but FWD) and though it's currently destined for scrap (my brother hit a stump with it and I fear the crank is bent or lower half is cracked) it was also a "Used it last year, just got a new one!"
I got it "running" back then but it sounded like absolute garbage. Turns out the flywheel key was sheared and thus timing was off. Also the previous owner had ruined most of the threads up there and I had to lose a washer in order to get enough torque on the flywheel up there (even after mating/lapping the taper carefully) for it to stop shearing flywheel keys.
I guess I learned a lot... and it did last me a few years until that aforementioned mishap with a nasty tree stump.
My favourite channel by far. Love your work over there mate! Big Aussie fan from Western Australia! 🍻
Right on the money with push mower prices. I find they sell a little better at the beginning and end of season.
Thanks for the share, first time to see a roller troubleshooting and fix!🙌🏼
If you have another good used blade hub, a running push mower goes for $20-$30 every day of the week IMO.. I sold one a few weeks ago for $25 at one of the New England tractor shows.
Well worth it for parts you came out ok good video thanks
Really admire your skills. Thank you for sharing. Cheers
Two outta three ain’t tea bag... Parts is parts brother, it’ll all work out. Thanks for sharing
I Always come back to YOU PAL!!!!
One gas station near me sells ethanol free. It’s like liquid gold. Everything runs so well
Andrew Camarata uses paper towels and compressed air. Throw in some individual paper towels and then spray around inside with compressed air. The air causes any liquids to jump up and the paper towels soak it up.
Hey there. I use canon cameras too for general photography. check the auto focus servo setting o the camera. there are 2 settings (i believe). one-shot auto focus and Ai servo auto focus. see if changing the settings helps. just a thought. love your content brother.
Hi Mustie .. i have a 98 cc single cylinder lawn mower ...what spark plug gap would you usually use for a lot of these things you fix and recommend for my mower ?
Hope to hear from you .Rgds Don.
110 HS, eh? Not bad. I'm tired of using my phone for vids and it looks like those are quite affordable on the preowned market. I might have to snag one soon!
i love watching you video on you tube you know what you doing and you very smart
As always, great content and banter, I work nights at my 2nd job, quiet building, hang out w Mustie
Much less "fish eye" effect, but you may want to double clean the lens. Your content is so entertaining and educational. Thanks for putting in the effort.
I had the same issue with an Intek fuel bowl gasket (it expanded and would no longer fit on the carb), it was resolved by boiling it in hot water for about 10 minutes.
I'll have to try that . Thanks for the tip
I acquired that same Craftsman tiller but the gearbox didn't work but the engine ran great so I just pulled the engine off it. At least I got a great engine out of it, will probably use the engine for either a mini bike or go kart lol.
I'm so happy you did another one of these because believe it or not last night and this morning was literally binge watching these videos 😂. Another masterpiece well done 😀👍
I LOVE watching these long ones I put my feet up drink my tea and nibble on snacks Thanks Mustie
Always enjoy your treasures! You’ve inspired me to start fixing stuff again. Could you put some dry gas in the tank and slosh it around to get all the water out?
We have Bonfire Night (Guy Fawkes night) 5th November - I think that's where all the old gas goes here in the UK! Also a lot of pallets unfortunately! Great vid, you truly are the 'engine whisperer', thanks!
I love the animal clips at the end of a couple of your videos. It reminds me of the clips at the end of the CBS Sunday Morning Show.
If you hang out with in the morning Mustie BYOC!* ( Bring Your Own Cup!!)
Richard Warnock Lol. I like my coffee with a little bite to it.
is this de-caf...
or un-leaded??
:-)
I'm about to have my 4th cup for today.
I average 5 to 6.
I have narcolepsy and coffee is way better than the meds the VA had me try.
Bring your own carb