@@enagonius It's a bit finicky on Vader 3 Pro, you have to press them almost exactly at the same time and wait for a bit. It's easier on recent controller (Direwolf 2 for example)
@@boombaka I see. I'll give it a try again. I managed to calibrate the analog sticks and triggers, but when I tried pressing down instead of up for the gyro it didn't work for me.
Sou brasileiro e estava justamente com esse problema nos analógicos, pensei que estava com defeito ou algo do tipo. Não encontrei um vídeo do brasil ensinando como resolver, porém procurando nos vídeos estrangeiros encontrei o seu, e solucionou de vez meu problema! Muito obrigado, irmão!
Mate!!! you saved my life with this video. I ordered this from aliexpress and i was so sad to have to return it because it would take a lot time again, but with this video you helped me lot. Thanks again!
Bro, your video helped me a lot, today I received my Vader 3 Pro and it had this problem with the analog sticks, I was already sad thinking that it had arrived with a defect, but thanks to your video my Vader 3 Pro is working perfectly now, you're cool
Hey bro do you know anything about this controller not being able to connect to a monitor? I've hard wired and screencasted and they both seem to upset and change all the buttons
BRUH! Thank you, my apex 4 pro is literally only two months old and RT would randomly engage and disengage. I thought the controller was already on its way out, thank you again.
For anyone watching later on, on further updates. The light does not flash red, it will blink green and white, and that’s how you know you are on calibration mode. I was confused at first too.
Hey guys, i am having a problem. My X button is stuck, but not physically, my controller is only sending the X input to the computer. I already teared it down and cleaned it with contact oil, no effect. Any ideas??
Any idea why the start button now cycles through the hotbar on Minecraft? It's like if I was pressing RB and now can't get to the start menu....this ish is driving me crazy.
Thanks. It's strange that Flydigi is not mentioning this in the manual. A question. Does this controller have more button combination that manual does not mentioning? Like config/profile swapping on the fly? I've tried randomly pressing some, but no luck to find anything.
You can change profiles by combining [select] and [A/B/X/Y] but you need to set it up beforehand in Pc space app. That and switching Xinput/Dinput mode, stick/gyro calibration are all functions which can be activated with combination that I know of
I have an issue where the LT button shows as pushed. The button acts as if it's it's pushed during gameplay. I tried calibrating but didn't fix the issue. Any ideas?
Thanks man, I have a question, in the flydigi software, specifically in the pad tester option, the left stick test the gyro (you lean the controller and it reads the left stick leaning the same way) , I have to press the left trigger to lock it and see the readings from the joystick, is it normal?
@@boombaka you know what, I made a calibration setup twice and the weird behavior disappeared, I have no clue what was going on but all works like a charm now. Is the best as many people claim, you can't get a better controller for that price
Yep, apex 4 of mine also updated firmware and fucked up the right trigger, I thought it was broken (second day with the controller), but recalibrating solved it.
Hi, do you know if there is a way we can perform the Back gesture on android ? I am trying to use it with Odin 2 Dock, but Unable to use the back menu function. to open the options/settings menu, Thanks.
My Vader 3 Pro won't connect in NSwitch mode to the PC (it has WiFi on the motherboard). Only on cable. And the left joystick has a permanent drift only on NSwitch mode.
Apex 3 took 6 months for reWASD to implement support, but I think Vader 3 being the more interesting gamepad, if there's enough people asking for it it might takes less.
Bro, im using vader 3 pro for playing on warzone mobile, theres the problem relate keymaping conflict, the problem is when im using hold for aiming, all of my key stuck not responding, but if im using toggle for aim nothing happened, do u know why ?
HEEELPP, i have Flydigi Apex 3 and try the same combo which it sets it on calibration mode but i do the whole thing and it doesnt fix anything. for a second i thought it was stick drift buts clearly calibration issues my left joystick is only gooing to the left even if i push it to the right. please can someone help me?
OP, whats the lowest score you get on circularity test? I think that the Hall Sensor thumbsticks Flydigi uses are of meh quality and worse than ALPS. Before i found your video i was getting 12.5% error rate, and had dead zone issues [had to set it to 20 in the software, otherwise it would drift] After i did a calibration, my dead zone can be set to 0, and the error rate is 4% for each stick BUT, i also own Zeus 2 gamepad, it uses ALPS joysticks and hall triggers, it passes the circularity test with 0.2% on left stick and 0.6% on right, unbelievable low numbers
I have 8% deadzone set for my controller via PC space software, and error rate is around 9~10% might actually try the 0 deadzone and report back to you
@@boombaka do you have centering drift if u use less than 8% deadzone? My VP3 arrived yesterday and i had to set 8% deadzone in both sticks to avoid centering drift, it seems that joystick springs are not good.
If you're asking about gyro drift on Nintento switch emu, it's actually Ryujinx's fault. On other emu (Dolphin) and on reWASD remapper software, I see no drifting at all
Wait, I'm confused. Did you get the Vader 3 and the Vader 3 Pro? I'm still trying to figure out your comment on the analog stick's low spatial resolution in flight sims. Can you confirm the Vader 3 Pro has the K-Silver JH16 Hall effect sticks? Then spatial resolution should not be an issue at all.
@@boombaka Thanks for responding. I just wanted to double-check because there's no Pro in the video title. Please keep making content on this controller - you're the only UA-camr who's talking about it so far. :)
vader 3 pro has the hall effect stick. the normal version does not. have you read the entire desciption of the vader 3 pro? the 3rd bullet pint mentionts the K-silver hall effect sticks. the listing of the regular vader does not mention the hall effect sticks.
@@RasenRambo23 okey, great. have you purchased one already. i did but my card did not seem to get charged yet and theire is no known shipping date, enthough when i load the listing again theire is a clear expected deliery date. i just hope my order does not get messed up.
@@Dannydstr66 that I've experienced it too. Fixed it with a simple calibration. But this new problem doesn't seem fixable. I can enter calibration mode. But somehow can't exit it. Making it undone.
i dont know from where they will send it or if they are in stock. but i could purchase one as of yesterday. i looked everysingle day and yesterday i could purchase one. althoug it might take a week or 3 to get to me.
Brother, to recalibrate de gyro, you must hold the D-pad DOWN. Please, feedback. Tahnks for the video.
Yeah that's another function this controller has. I didn't mention it in the video because I thought stick calibration was more urgent to cover
hey, after i entered recalibration mode for gyro - what i suposed to do next? just wait? it blinks like few seconds and then it stops
It doesn't work here. Nothing happens when I press the combination of buttons with Down instead of Up.
@@enagonius It's a bit finicky on Vader 3 Pro, you have to press them almost exactly at the same time and wait for a bit. It's easier on recent controller (Direwolf 2 for example)
@@boombaka I see. I'll give it a try again. I managed to calibrate the analog sticks and triggers, but when I tried pressing down instead of up for the gyro it didn't work for me.
Helped a bunch! Thank you!!! I legit thought my controller was broken
Thanks guy. Brought the circularity down from 8% error to 6%!
here too, from 9 to 4%
same
25% improv gang
Sou brasileiro e estava justamente com esse problema nos analógicos, pensei que estava com defeito ou algo do tipo. Não encontrei um vídeo do brasil ensinando como resolver, porém procurando nos vídeos estrangeiros encontrei o seu, e solucionou de vez meu problema! Muito obrigado, irmão!
o meu analógico não desce pra parte de baixo do eixo...conseguiu resolver o teu?
@@KimRibeiro22o meu Apex 4 tá com esse problema, vc resolveu o seu?
eu tava achando que o meu já tava querendo dar drift, fiz isso ai e resolveu. O meu é o vader 3
Mate!!! you saved my life with this video. I ordered this from aliexpress and i was so sad to have to return it because it would take a lot time again, but with this video you helped me lot. Thanks again!
Bro, your video helped me a lot, today I received my Vader 3 Pro and it had this problem with the analog sticks, I was already sad thinking that it had arrived with a defect, but thanks to your video my Vader 3 Pro is working perfectly now, you're cool
glad to be of help!
@@boombaka 👍
Hey bro do you know anything about this controller not being able to connect to a monitor? I've hard wired and screencasted and they both seem to upset and change all the buttons
@@iFlow_YT what do you mean by "connect to a monitor"? are you playing on a PC or a smart tv?
@@boombaka gaming phone bro red magic 7s pro. But as soon as I screencast in any way it bugs the controller out
OMG man, thank you so much!
I was having problems with the triggers and I even opened the control to see if something had broken.
Nice video, i really apreciate this content
BRUH! Thank you, my apex 4 pro is literally only two months old and RT would randomly engage and disengage. I thought the controller was already on its way out, thank you again.
Thank your so much, You're making a difference!
For anyone watching later on, on further updates. The light does not flash red, it will blink green and white, and that’s how you know you are on calibration mode. I was confused at first too.
Best video out there 👌
THANK YOU BRO, I LOVE YOY
thx, but. How i update the firmware? and why should i do that?
Hey guys, i am having a problem. My X button is stuck, but not physically, my controller is only sending the X input to the computer. I already teared it down and cleaned it with contact oil, no effect. Any ideas??
Thanks bro! Nice tutorial.
great info, thanks! subbed.
Does anyone have weak vibration in nintendo switch mode like my v3p? I even max the vibration but it can't vibrate strong compare to the pc mode
Any idea why the start button now cycles through the hotbar on Minecraft? It's like if I was pressing RB and now can't get to the start menu....this ish is driving me crazy.
Thanks. It's strange that Flydigi is not mentioning this in the manual.
A question. Does this controller have more button combination that manual does not mentioning? Like config/profile swapping on the fly? I've tried randomly pressing some, but no luck to find anything.
You can change profiles by combining [select] and [A/B/X/Y] but you need to set it up beforehand in Pc space app. That and switching Xinput/Dinput mode, stick/gyro calibration are all functions which can be activated with combination that I know of
@@boombaka
"but you need to set it up beforehand in Pc space app"
deeper
@@boombaka Что за музыка играет на фоне видео??? можно название трека?
Thank you so much! Your vid saved me!
You saved me, thanks!!!
Title of the wonderful music pls...
I have an issue where the LT button shows as pushed. The button acts as if it's it's pushed during gameplay. I tried calibrating but didn't fix the issue.
Any ideas?
Does it happens in other modes (Nintendo Switch pro/bluetooth) If so then it might be a hardware problem
I am having the same problem, but with the X button. Did you manage to solve it??
I have tested it with bluetooth and dongle, and i am having the same problem. But i believe it is a firmware issue.
@@alonestar7 I messaged the company, they said there is nothing they could do. I sent it back for a refund and got a new one, which has been fine.
@@thomasantipleb8512 Ok. Thanks!
Thanks man, I have a question, in the flydigi software, specifically in the pad tester option, the left stick test the gyro (you lean the controller and it reads the left stick leaning the same way) , I have to press the left trigger to lock it and see the readings from the joystick, is it normal?
that doesnt sound normal. You may have to look into Flydigi PC space to see if some unwanted setting is on (gyro tilt, for example)
@@boombaka you know what, I made a calibration setup twice and the weird behavior disappeared, I have no clue what was going on but all works like a charm now. Is the best as many people claim, you can't get a better controller for that price
@@juansotelo3996 good to know it is sorted
Что за музыка играет на фоне видео??? можно название трека?
"No name" by Tea
@@boombaka Спасибо Бро:)
Yep, apex 4 of mine also updated firmware and fucked up the right trigger, I thought it was broken (second day with the controller), but recalibrating solved it.
they still not fix hyro(((
Thanks my man! Its down to 9 for 5!
Hi, do you know if there is a way we can perform the Back gesture on android ? I am trying to use it with Odin 2 Dock, but Unable to use the back menu function. to open the options/settings menu, Thanks.
thank you so so so so much!
Thank you man
My Vader 3 Pro won't connect in NSwitch mode to the PC (it has WiFi on the motherboard).
Only on cable. And the left joystick has a permanent drift only on NSwitch mode.
Have you tried holding the home button for a couple of seconds? You also need to make sure Bluetooth paring is available on your pc
@@boombaka
Yes! It works now! Thank you, man!
YOU ARE A BOSS
great video. btw how long do you think rewasd will support this controller?
Apex 3 took 6 months for reWASD to implement support, but I think Vader 3 being the more interesting gamepad, if there's enough people asking for it it might takes less.
Bro, im using vader 3 pro for playing on warzone mobile, theres the problem relate keymaping conflict, the problem is when im using hold for aiming, all of my key stuck not responding, but if im using toggle for aim nothing happened, do u know why ?
I am afraid I cant help much here because I don't game on mobile platforms at all...
I JUST DID THIS AND NOW MY STICKS HAVE STOPPED WORKING! any ideas what to do?
PANIC OVER!! I just did it again & they started working again🤣
@@Mister_Tedious Glad it got sorted out.
thank you brother
Salvo dmais.... Thanks bro
Спасибо тебе мужик!
HEEELPP, i have Flydigi Apex 3 and try the same combo which it sets it on calibration mode but i do the whole thing and it doesnt fix anything. for a second i thought it was stick drift buts clearly calibration issues my left joystick is only gooing to the left even if i push it to the right. please can someone help me?
I have the same problem brother, just do the same as shown in the video
Samee do you manage to fix it?
Can u fix finally??
OP, whats the lowest score you get on circularity test?
I think that the Hall Sensor thumbsticks Flydigi uses are of meh quality and worse than ALPS.
Before i found your video i was getting 12.5% error rate, and had dead zone issues [had to set it to 20 in the software, otherwise it would drift]
After i did a calibration, my dead zone can be set to 0, and the error rate is 4% for each stick
BUT, i also own Zeus 2 gamepad, it uses ALPS joysticks and hall triggers, it passes the circularity test with 0.2% on left stick and 0.6% on right, unbelievable low numbers
I have 8% deadzone set for my controller via PC space software, and error rate is around 9~10%
might actually try the 0 deadzone and report back to you
@@boombaka do you have centering drift if u use less than 8% deadzone? My VP3 arrived yesterday and i had to set 8% deadzone in both sticks to avoid centering drift, it seems that joystick springs are not good.
If the stick wiggles a bit while centered, there may be some issue with the spring, yeah. I only need about 3% deadzone to keep drifting away
Whaaat is this song..? it's taking me to dimensions 😂
Cara, muito obrigado! Tks, bro
Has the gyro drift been fixed yet?
If you're asking about gyro drift on Nintento switch emu, it's actually Ryujinx's fault. On other emu (Dolphin) and on reWASD remapper software, I see no drifting at all
do dpad down + select + start for the gyro callibration
Hi. Bro, And what should I do with the controller after this sequence of buttons ? leave it still or keep spinning some how ?
@@raonialbuesjust leave it on a flat surface for about 5 seconds
@@NEDChlor Thanks man
Thank you
Спасибо огромное, данный способ рабочий и очень простой💪👍
its same way with APEX 4, if you have trouble like this
Wait, I'm confused. Did you get the Vader 3 and the Vader 3 Pro? I'm still trying to figure out your comment on the analog stick's low spatial resolution in flight sims. Can you confirm the Vader 3 Pro has the K-Silver JH16 Hall effect sticks? Then spatial resolution should not be an issue at all.
Mine is Vader 3 Pro, I didnt get the normal version. I don't see any where that specifies the type of analog stick, so I cant say for sure
@@boombaka Thanks for responding. I just wanted to double-check because there's no Pro in the video title. Please keep making content on this controller - you're the only UA-camr who's talking about it so far. :)
vader 3 pro has the hall effect stick. the normal version does not. have you read the entire desciption of the vader 3 pro? the 3rd bullet pint mentionts the K-silver hall effect sticks. the listing of the regular vader does not mention the hall effect sticks.
@@caleasthetic That's clear to me. I was confused because the title of the video is only Vader 3.
@@RasenRambo23 okey, great. have you purchased one already. i did but my card did not seem to get charged yet and theire is no known shipping date, enthough when i load the listing again theire is a clear expected deliery date. i just hope my order does not get messed up.
I was thinking of buying this controller for PC and Switch but thats not ok.
If you're thinking about gyro drifting, it doesn't work like that on a real switch/yuzu, seems to be a quirk of some apps not having proper support
it seems to be a Ryujinx problem and not a gamepad defect. I tried NS mode on other emulator (Dolphin) and it works fine
THANK U!!!!
thanks
Nice vídeo😁
Thank you
Any idea to fix flying direwolf??
The analog stick, LT n RT trigger and start button not working in mine
@handsomecapybara did you fix it?
i have the same problem
@@Dannydstr66 nope. I gave up on searching a way to fix it..
I'll just buy other controller that is NOT flydigi
@@handsomecapybara do you still have it?
@@handsomecapybara i found a way to fix the "drift" like issue
I dont know if its your problem too
@@Dannydstr66 that I've experienced it too. Fixed it with a simple calibration. But this new problem doesn't seem fixable. I can enter calibration mode. But somehow can't exit it. Making it undone.
OMG I ALMOST SMACK DOWN MY CONTROLLER!!!!!! THANK YOU SIR
What is the real weight of the control?
👌👌👌👍👍👍👍👏👏👏👏
Now if only amazon had some stock.
i dont know from where they will send it or if they are in stock. but i could purchase one as of yesterday. i looked everysingle day and yesterday i could purchase one. althoug it might take a week or 3 to get to me.
They have some now. Just ordered one. But now there is only like 4 left.
Its the vader 3 pro.
@@sgonzo5572 Mine arriving tomorrow. Nice.
❤❤❤❤❤👍👍👍👍👍
❤❤❤❤❤❤❤🎉🎉🎉🎉