We give the GTO the shaft!!
Вставка
- Опубліковано 15 вер 2024
- In todays video we install a @Driveshaftshop driveshaft on the GTO!
FOLLOW THE BUILDS ON ALL PLATFORM’S
INSTAGRAM:
Bought2Buildofficial
/ bought2buildofficial
yellow_hellcat1
/ yellow_hellcat1
FACEBOOK:
/ bought2build
SAVE SOME MONEY AND USE OUR DISCOUNT CODES!!!
⬇️Sponsors⬇️
apex Off road lighting use my 15%off code “MOPAR15”
www.apexoffroa...
Lighting Trendz use my code “JMCKIM20”
lightingtrendz...
wickedlyboosted use my discount code “SPONSOR10”
www.wickedlybo...
PART'S/MATERIAL'S USED:
DSS PONTIAC 2005-2006 (ONLY) GTO 3.5” 1000HP 1-Piece Aluminum Driveshaft with Direct Fit Rear Flange
driveshaftshop...
BMR Suspension Driveshaft Safety Loop 2004-2006 Pontiac GTO
www.jegs.com/i...
Transmission Tailshaft Plug'S POW301230
www.summitraci...
Lisle Exhaust Hanger Removal Pliers
www.amazon.com... - Авто та транспорт
FOLLOW THE BUILDS ON ALL PLATFORM’S
INSTAGRAM:
Bought2Buildofficial
instagram.com/bought2buildofficial/
yellow_hellcat1
instagram.com/yellow_hellcat1/
FACEBOOK:
facebook.com/Bought2Build
I'm surprised you didn't cut off the 04 muffler hanger on the passenger rear cradle side cause it's close to the driveshaft. I cut mine off.
04 hanger? Weird cuz this one’s an 05 and my 06 had it too I cut it on the 06 but on this one I didn’t bother the driveshaft can go up and down right now with no issue if it starts going that far to the side we may have bigger issues ya know but yeah I’ll keep an eye on it if I have to I’ll cut it but when I made the exhaust for the car I made it use all the hangers 👍🤟🤟🤟
Have you thought about Strange engineering rear coil overs part number #S5004. However you have to also buy G-Force Engineering 2004-2006 GTO & Holden VZ Rear Coilover Bracket Kit, Part #GTO10404A.
I did this to my GTO and I’m about to install it on the other GTO I have. I’m able to fit a larger wheel without cutting or bending the fenders.
I’ve thought about it I should have done it when I did the rest but since everything in the rear is new now I’m gonna run it as is for now and see how it goes and go from there
@@bought2build gotcha, yeah, I did the same thing I bought new Pedders coil overs but I’m running a 19 inch wheel with 275 tires and it scrapes all the time. I tried to adjust as much as possible but I can’t seem to do it even if I cut it I think it’s still going to hit. so I just decided to get those coil overs. Only thing I hate about it is that you do you have to do some cutting and welding but I think it’s worth it. I have it on the other GTO I own and the ride is absolutely amazing. Hopefully you change your mind. One day. You can make a good video on it. That would be awesome. By the way your Gto project is coming along really great. What I love about your videos is that you show the process which helps a lot of us Gto people keep up the good work brother.
@@buddyrebel_Garcia thanks brotha I appreciate that! Yeah I try to show as much as I can sometimes it’s hard cuz I’ve gotta try balancing not making the videos so long that no one watches them ya know
But yeah maybe at some point I’ll get them for this thing I’d like to do the fox body coil over setup in the front too so I can have either strange or menscer coil overs all around on my other car the hellcat I’ve got JRI coil overs all around and they ride pretty good and I like all the adjustability!
Yeah rubbing is definitely an issue on these cars I run a 276/60R15
And had to cut/roll the fenders and some other little things but in this video my 275/50R15s are on it and those ones fit pretty easily no real issue
I appreciate the support bro 🤟🤟🤟
How big of a tire..??
How in the world did you get the Allen key in? I got the long ones also can’t get them lined up.
@@Juicey3887 it is a pain but rotate the wheels and drive shaft as you go I did 1 or 2 at a time and then would rotate the wheels a little hope this helps thanks for checking out the channel 🤟🤟🤟🤟👍👍👍👍
@@bought2build thank you for the quick response. I tried everything didn’t know if you ended up tapping in the socket with a hammer or not don’t want to mess these bolts bolts up
@@Juicey3887 no problem when I see them I try to reply 🤟 and no I didn’t hit them in I just used the long Allen sockets and rotated the drive shaft until I could a good spot where I could get on them 1 at a time it’s not fun it’s time consuming but is possible
If you really can’t get it get the Allen sockets with the ball style tip
Just ordered almost same driveshaft, magnum f only difference. How long did it take to arrive?
Also, I’d like to hear your experience once you start driving it. I had a Hinson on my a4 and it was smooth. Same ds on my m6 swap and it was horrible. Seems like angles might be off on these cars.
I got mine from someone that ordered it and never used it broke his trans before it came in and ended up going 4l80e got it for 400 bucks which worked out well since this car will be going 4l80e at some point as well so I’ll end up re selling it and yeah I’ve heard of people having issues and then others that were fine I’ll have to see how it does once I get the car out again and go from there
@@bought2build I appreciate the reply, and look forward to how it works for you. Seems hit and miss in these cars
@@goat_life254 no problem and yeah I agree a lot of things are hit or miss with these cars sadly lol
Nice video ... question what size are those hex retainer bolts?
Never mind I seen the subs for it great job on goat 🐐 🥶
@@animuldopesgs8346 thanks!! I appreciate it! The bolts in the rear can be a pain in the A** lol just a heads up 🤟🤟🤟🤟
Have you noticed any vibrations or weird harmonics after installing the one piece driveshaft?
Possibly.. if you’ve seen the gto dyno video we have been chasing a vibration but I think it’s just the wheels and tire combo we will be testing it with different wheels on the car here soon 🤟🤟🤟🤟👍👍👍👍
@@bought2build thanks for the response bro. I’ll check out the other videos too 👍🏼
@@alphasaiyan5760 of course bro! And yeah for sure! Will have it back on the dyno in the next couple weeks and try to see if it was intact the wheels! 🤟🤟🤟🤟
How do you know if it's balanced
Supposed to be balanced from the company you can see little weights welded on but there is no good easy way to check if it is balanced sorry I didn’t see your comment sooner 🤟🤟🤟👍👍👍👍