I was searching for a DIY video for a dry wall dust filter, this came up. My man has a million dollar wood shop factory. I'd have to go back to school to put this guy together. CHEERS!
WONKY - That box with the hinge is VERY smart, but you're right, the remote is just a winner of an idea. And, I truly appreciate that you show the "well, darn, I made a mistake" and how you fixed it. I look forward to seeing what you make!
@@ScorpionBuildsWoodworking That's awesome. I'll have to look into these things. I can think of a few outlets where this would make my life so much easier.
@@ScorpionBuildsWoodworking, he's a character in an Anime called "Cowboy Bebop" from the late 90s. It's a fun show about bounty hunters in the near future. You should watch it if you can. And I agree with Rebecca, your narrator voice sounds just like Spike.
Wonky...Great job~! I have a couple of box fans that have followed us around the globe (retired Army). I've used them in this same fashion for years, but securing the furnace filters with cable ties. The cases are pretty well worn, so this looks like a way to remedy that. Love the incorporation of the remote. Thanks for sharing~!!
Wonky nice stuff, brother nice stuff. I don’t know how many do yourself Wood Projects I see on UA-cam and most of them interest me although I got most of the tools other than a router there’s something still leading me apprehensive. I know what it is motivation for do it yourself projects with woodworking. Anyway, before I get into thesis here thank you so much, Phil.
Wonkee? Wangky, goodness, Michael, how do you spell that? I love that you allow your mistakes to be included as it helps us get over our own mistakes when we blunder. I love your sense of humor!
This was a great idea. I plan on building this! I will pass along the credit for this 100%. I've seen lost of variations of this but yours was the best I liked of them all. I am now a subscriber!
Wonky, lol. I have been looking for this wireless remote, fantastic job. My concerns are: 1. Would you want to have quick disconnect for the wires where it's locked in, probably a Uxcell Twist Latches? 2. A secondary Uxcell Twist Latches to box up the wires so the dust doesn't go into the excess wires inside. 3. Possible to have the knob on the outside? Love the piano hinge it takes 77 watts still correct? Would be cool to run it off solar panel with 100 watts supplement from a BMS styled battery
I’m glad you enjoyed it… electrical uxcell twist latches could keep the dust out of the connectors. I’m not sure how many watts it consumes, I didn’t check before or after, but I would assume as the filter gets dirtier, the wattage usage would go up. I thought about putting the controller on the outside, but for me, I always only use it on high, so I just did what was easiest for my application. But I’d love see any modifications you may do :)
Wow buddy look at that. You can get one premade oh man unbelievable thank you both for taking the initiative to make the video and comments afterwards.
I’ve seen videos on UA-cam also where someone has four filters and I forget how they name it but it’s named after a person. Then they have the fan of course all duct taped around the whole structure, closing off the scenes.
Thank you so much for a really great construction video that I can actually use and replicate. So much contents on You tube that is so advanced. Only downside is that we (in Europe) use centimeters, so I can't work with inches. But I will try to work around that.
Did you say wonky? I was about to build one of these for my small garage shop and was about to buy a pack of filters. I don't know why I didn't think of a washable one. An obvious good idea.
Try the new Merv 14 as its 5 inch thickness works 10x better then the inch wide ones without the bogging of the motor… cheers 🎉 great wood work tutorial
Mr. Wonky... nice clean build. would like to know what filter you used I have been looking for a washable one and have yet to find something that works.
Wonky... One of these has been high on my list of things I keep meaning to build. The problem is, I only think about it when I'm smack in the middle of a project. Maybe this will be the year of the air filter for my shop. Great job, brother! UA-cam is also on my list, so if I build it, I'll try to record it and give you a shout-out for the design.
Thank you, I I have been putting a filter by itself behind the box fan for a couple years. And it actually works really well. I’m hoping this will collect a smaller micron of dust
Thanks for the good video. I'm going to build one like this I think. One thing I'm not sure of and maybe some electrician types can chime in on. Will all that extra wire for the fan all bundled up like that create heat and be a fire hazard? I know a guy who almost burned down his house by only using the first and last 3 feet of (admittedly much longer) a 50 foot extension cord that was rolled tightly (and that might have made it more dangerous) on a cord wheel. Melted that thing into a huge glob. I guess a guy could always shorten the excess fan cord if it was bothering him too much. Thanks again!
Thanks, rolling up extension cords when using them is a fire hazard for sure. I wasn’t worried about it with mine figuring it has constant air flowing across it when the fan is running, but if it makes you feel better just run the cord around the inside of the box and secure it with cable ties and screws
Thanks, well I have not had to clean it yet since I just made it. The old system I used I only replaced the filter once a year or more. But I think it really depends on how much you use it and how dusty the shop is if there’s a dust collection system, you may not need to clean the filter very often. I also have a second filter to put in while the other one is drying or I have time to clean it
Why use a solid 20x20 piece of ply for the back if you're just going to cut most of it away? I get box-store plywood is cheap(er), but I'm not wasting that material if I don't have to. If you have a good reason, I'd love to learn something new! Great video
That’s actually the front of the fan, and for a fan to work properly it needs to be around shape. Otherwise it will just cavitate and not pull the air through the filter. I also plan to use the circle that I cut out to make a wooden shield for my kids to play with.
Wonky ... great video and build! I would really like to do that some day, right now I just use some bungee cords to keep the filter from sliding off .... actually if the fan stays on you don't even need to secure the filer the fan suction will keep the filter against the filter box grill. I know .... how hillbilly can you get :) Again, great job on the build!
Wonky... this is a neat build. I like the remote control and washable filter. I was thinking of building an alexa controlled smart switch inside mine. How long can you go between filter washes?
Thanks, and Alexa control would probably work pretty good too. This is the first time I’ve used a washable filter. But I’m sure how often it Hass to be cleaned will depend on the amount of use and dust within the shop, and how good your dust collection system is throughout the rest of the shop?
A much simpler approach: get 1/2" J channel for vinyl siding. Cut two pieces to 20". Clip to left / right sides 20" filter. Place everything onto "intake" size of fan. Zip tie J channel to fan. The zip ties hold the J channel to the fan. The J channel holds the filter. To replace the filter, slide it out of the J channel, and slide a new one in.
Wonky lol - really cool idea. How much airflow do you lose from the filter being in place? I'm not asking you to test CFM loss or anything, just roughly please. Thanks!
The only thing I'd done differently is built it so the whole fan sits inside as a unit. That way when the fan dies you can just swap it out instead of having to disassemble the new fan to fit the parts.
Wonky is good…..right?? Hey Michael, Pat here from the Toronto area, Canada. Just wonderin’ why you didn’t build your box around the metal frame that came on the fan?? I understand taking the screens off front and back, but couldn’t you have slid the metal frame snuggly into the plywood box??? Just askin’. the way I see it - Pat
Just to help protect your lungs, those washable filters are great but don't help with the microscopic dust that does the most damage to your lungs, so this is a great additional aid but don't count on it for the entirety of your dust scrubbing! ❤
Thanks for that, I Agreed. It’s just another tool to help reduce the dust in the air. It’s always recommended to wear a proper dust respirator. Even though I wasn’t wearing one in the video lol I also have a 3 micron filter on my dust collection system for the shop.
Mr. Wonkie, why did you mount the hinge in that direction? Folded the other way would eliminate the gap. I would have also made the speed control easily accessible, just in case. Another consideration, the filter access is on one side and the wiring access is on the other side. This is ok for standing, but if you wanted to hang it, things change. Good job though, and for me, everything in my shop is "a work in progress".
I guess I could’ve mounted the hinge to the top, it just didn’t cross my mind. I chose to mount all of the controls and wiring inside the box because I planned on using a remote to turn it on and off, and I have found over the years. The fan is always on high anyway.
I wonder if you could have had more filters for the same amount of fan. When the cdc was recommending building these with duct tape they were putting the fan on one side of a cube and air filters on four others. Would have made it bigger fer sure…
Expensive. I did the same thing with a 20" filter and duct tape. Not as pretty but given the price of plywood and the fact that a 20" box fan will only last about one or two years it was a lot cheaper.
Those cheap box fans are not designed to pull air thru a filter. The cfm is greatly reduced and as the filter loads it drops off considerably. They are minimally effective as a air "purifier"
They may not have been designed for that. But I’ve been putting a filter on mine for quite a while now and it works pretty good from my experience. I also I’m using a washable filter so that I can keep it clean. But if you put too low of a micron Filter on there or you don’t clean it often enough you may have some flow problems, but that goes for any filtration system.
Wonky. I've seen an extremely cheap version of this using 4 1" filters and some duct tape, and putting the fan on top. I like your version better! Need to build this for inside the house.
The piano hinge is on the top, or are you meaning why not have the whole top hinge? If that’s the question, I wanted everything around the fan to be sealed so that it would only pull air through the filter as much as possible
rwonki. the heavy stuff will settle out of the air in a few minutes. This will keep the air stirred up so that they stay in the air longer. The small stuff that gets past your mucus membranes will not be filtered out by that setup. It will still get into your lungs. AND, grossly overbuilt. 2 bungee cords would hold a filter to a box fan.
I was searching for a DIY video for a dry wall dust filter, this came up. My man has a million dollar wood shop factory. I'd have to go back to school to put this guy together.
CHEERS!
Wow, thank you. I’m glad you enjoyed it
Glad to see work done in a "real" shop, without a brag wall of expensive Woodpecker squares.....
Thanks
And shelves full of every Festool product sold.
WONKY - That box with the hinge is VERY smart, but you're right, the remote is just a winner of an idea. And, I truly appreciate that you show the "well, darn, I made a mistake" and how you fixed it. I look forward to seeing what you make!
Thank you, I’m glad you enjoyed it
Wonky,,,an excellent build that'll help cleaning the air in your shop. Like the remote control use for it.
Thanks 👍
Got me with that squeaky hinge, lol
Loving the wonky remote control.
Since the remote came with three controllable outlets. I put one on my bug zapper so the mosquitoes will stop attacking me while I work lol.
@@ScorpionBuildsWoodworking That's awesome. I'll have to look into these things. I can think of a few outlets where this would make my life so much easier.
Wonky!! Excellent. Nice to see a real time make video with honest oopsies.
Thanks 👍
so good to hear spike spiegel is doing wood working See you space cowboy
Thanks, I’m not sure who that is but he must be a good looking guy lol
Cowboy bebop protag, a gateway drug anime. Cool show, even if ya ain't big on anime and each episode is %95 self contained@@ScorpionBuildsWoodworking
@@ScorpionBuildsWoodworking, he's a character in an Anime called "Cowboy Bebop" from the late 90s. It's a fun show about bounty hunters in the near future. You should watch it if you can. And I agree with Rebecca, your narrator voice sounds just like Spike.
Wonky...Great job~! I have a couple of box fans that have followed us around the globe (retired Army). I've used them in this same fashion for years, but securing the furnace filters with cable ties. The cases are pretty well worn, so this looks like a way to remedy that. Love the incorporation of the remote. Thanks for sharing~!!
You are welcome, and Thank you for your service. Glad you enjoyed the video
Wonky… this is just what I needed in my garage shop but didn’t realize it until you put it together. Cool.
Awesome
Wonky nice stuff, brother nice stuff. I don’t know how many do yourself Wood Projects I see on UA-cam and most of them interest me although I got most of the tools other than a router there’s something still leading me apprehensive. I know what it is motivation for do it yourself projects with woodworking. Anyway, before I get into thesis here thank you so much, Phil.
Thank you. I’m really glad to hear that you enjoyed the video. And would love to know what kind of projects you’re interested in building
Wonkee? Wangky, goodness, Michael, how do you spell that? I love that you allow your mistakes to be included as it helps us get over our own mistakes when we blunder. I love your sense of humor!
Thanks, glad you enjoyed it
This was a great idea. I plan on building this! I will pass along the credit for this 100%. I've seen lost of variations of this but yours was the best I liked of them all.
I am now a subscriber!
That’s great thank you. I’m glad you enjoyed it.
Great shop project to keep you protected. Nice wonky build video. Keep it up!
Thanks
Thanks
Wonky, great project. I will be using this video to make myself one. Thanks for sharing.
Thanks. Good luck
Wonky dude!!! I'm going to try this because I have asthma and this will help me to get better air quality!!!!!
Best of luck
Wonky, lol.
I have been looking for this wireless remote, fantastic job. My concerns are:
1. Would you want to have quick disconnect for the wires where it's locked in, probably a Uxcell Twist Latches?
2. A secondary Uxcell Twist Latches to box up the wires so the dust doesn't go into the excess wires inside.
3. Possible to have the knob on the outside?
Love the piano hinge
it takes 77 watts still correct?
Would be cool to run it off solar panel with 100 watts supplement from a BMS styled battery
I’m glad you enjoyed it… electrical uxcell twist latches could keep the dust out of the connectors. I’m not sure how many watts it consumes, I didn’t check before or after, but I would assume as the filter gets dirtier, the wattage usage would go up.
I thought about putting the controller on the outside, but for me, I always only use it on high, so I just did what was easiest for my application. But I’d love see any modifications you may do :)
Lasko makes a box fan which has a slot for any 20x20 filter. Its the Lasko FF305.
Ya but that’s not as fun
Wow buddy look at that. You can get one premade oh man unbelievable thank you both for taking the initiative to make the video and comments afterwards.
But I guess afterwards, we can also hook up that remote control unit, couldn’t we?
I’ve seen videos on UA-cam also where someone has four filters and I forget how they name it but it’s named after a person. Then they have the fan of course all duct taped around the whole structure, closing off the scenes.
Thanks, glad you like it
Thank you so much for a really great construction video that I can actually use and replicate. So much contents on You tube that is so advanced. Only downside is that we (in Europe) use centimeters, so I can't work with inches. But I will try to work around that.
You’re welcome. I wish the US would switch over to metric, it is so much easier to use.
Wonky? Hardly! Love that smile of success at 12:42.
It’s the little things life
Did you say wonky? I was about to build one of these for my small garage shop and was about to buy a pack of filters. I don't know why I didn't think of a washable one. An obvious good idea.
I did say wonky. I used a non washable filter for awhile before thinking I should use a washable one
Try the new Merv 14 as its 5 inch thickness works 10x better then the inch wide ones without the bogging of the motor… cheers 🎉 great wood work tutorial
Thanks for tip, I’ll look into it
@@ScorpionBuildsWoodworking Merv 16 impregnated carbon is good X7935
So this 5 inch carbon filter is it also by Lasko and an all in one unit fan that holds this 5 inch carbon?
Wonky! Enjoyed your video. Now I have a weekend project! Thanks!
Thanks, good luck
Nice work! I need to build something like that for painting cars.
You can get charcoal infused filters to help with fumes too
Good job, I will build one and adding the remote is a great idea
Thanks
Great job on the video, suprised when I saw how small your channel is,subbed
Thank you. I just started it in January.
Mr. Wonky... nice clean build. would like to know what filter you used I have been looking for a washable one and have yet to find something that works.
Thanks, I got my filter from Home Depot, but I linked one similar below
amzn.to/3XQK9bk
Wonky... One of these has been high on my list of things I keep meaning to build. The problem is, I only think about it when I'm smack in the middle of a project. Maybe this will be the year of the air filter for my shop. Great job, brother! UA-cam is also on my list, so if I build it, I'll try to record it and give you a shout-out for the design.
I know what you mean. Good luck with you channel, hit me up when you do.
I like this, and great video. Maybe post an update to see how much dust it collected over time?
Thank you, I I have been putting a filter by itself behind the box fan for a couple years. And it actually works really well. I’m hoping this will collect a smaller micron of dust
Brilliantly WONKY build!
Cheers!!!🍻
Thank you kindly
Excellent!! Now to make mine!!
Go for it!
Thanks for the good video. I'm going to build one like this I think. One thing I'm not sure of and maybe some electrician types can chime in on. Will all that extra wire for the fan all bundled up like that create heat and be a fire hazard? I know a guy who almost burned down his house by only using the first and last 3 feet of (admittedly much longer) a 50 foot extension cord that was rolled tightly (and that might have made it more dangerous) on a cord wheel. Melted that thing into a huge glob. I guess a guy could always shorten the excess fan cord if it was bothering him too much. Thanks again!
Thanks, rolling up extension cords when using them is a fire hazard for sure. I wasn’t worried about it with mine figuring it has constant air flowing across it when the fan is running, but if it makes you feel better just run the cord around the inside of the box and secure it with cable ties and screws
Wonky, excellent idea. Thank you!
Glad you liked it!
Wonky, first one I’ve seen; also like the innovation. I may try a metal version, I already have sheet metal. Nice construction.
Cool, thanks
Wonky! Such a great idea. New subscriber today.
Thanks for subbing!
Wonky , that’s a really good idea and box fans are cheap to buy even cheaper in yard sales. Just kinda curious how often you have to clean filter
Thanks, well I have not had to clean it yet since I just made it. The old system I used I only replaced the filter once a year or more. But I think it really depends on how much you use it and how dusty the shop is if there’s a dust collection system, you may not need to clean the filter very often. I also have a second filter to put in while the other one is drying or I have time to clean it
Why use a solid 20x20 piece of ply for the back if you're just going to cut most of it away? I get box-store plywood is cheap(er), but I'm not wasting that material if I don't have to. If you have a good reason, I'd love to learn something new! Great video
That’s actually the front of the fan, and for a fan to work properly it needs to be around shape. Otherwise it will just cavitate and not pull the air through the filter. I also plan to use the circle that I cut out to make a wooden shield for my kids to play with.
Nice build!
Thanks
Wonky ... great video and build! I would really like to do that some day, right now I just use some bungee cords to keep the filter from sliding off .... actually if the fan stays on you don't even need to secure the filer the fan suction will keep the filter against the filter box grill.
I know .... how hillbilly can you get :)
Again, great job on the build!
Thanks, I did it that way for several years, hope you’re able to make one some day
I use a filter with carbon to help with fumes in the air, too!
Clever… that’s the kind of thinking out side the box (fan) I like…
adding the remote is a good idea. I don't see anything wonkie at all.
Thank you. I used one of the other remotes to control my bug zapper too Get rid of the mosquitoes that Keep attacking me while I work. Lol.
Fun wonky build, thanks for sharing!
Thanks, you’re welcome
Wonky... this is a neat build. I like the remote control and washable filter. I was thinking of building an alexa controlled smart switch inside mine.
How long can you go between filter washes?
Thanks, and Alexa control would probably work pretty good too. This is the first time I’ve used a washable filter. But I’m sure how often it Hass to be cleaned will depend on the amount of use and dust within the shop, and how good your dust collection system is throughout the rest of the shop?
Great video. Is that wonky fan in a push or pull through the filter?
It is pulling through the filter
Wonky - Nice build. Great idea.
Glad you enjoyed it
A much simpler approach: get 1/2" J channel for vinyl siding. Cut two pieces to 20". Clip to left / right sides 20" filter. Place everything onto "intake" size of fan. Zip tie J channel to fan.
The zip ties hold the J channel to the fan. The J channel holds the filter. To replace the filter, slide it out of the J channel, and slide a new one in.
I’m sure that would work great. I just wanted to build one out of wood
I wish you had pictures to that girl that sounds interesting as well
Wonky lol - really cool idea. How much airflow do you lose from the filter being in place? I'm not asking you to test CFM loss or anything, just roughly please. Thanks!
Good question, I feel its pretty minimal, a ballpark guess maybe 15-20% average, I don’t really know
Wonky! Love this idea!
Thank you! I’m glad you enjoyed it
The only thing I'd done differently is built it so the whole fan sits inside as a unit. That way when the fan dies you can just swap it out instead of having to disassemble the new fan to fit the parts.
Originally, I was going to do it that way, but decided to do it this way to make it a little more compact. But that is a good idea thinking ahead
I just put two brackets that hold on a furnace filter onto the front of a box fan it’s really all you need
Ya, but not as fun
Wonky is good…..right?? Hey Michael, Pat here from the Toronto area, Canada. Just wonderin’ why you didn’t build your box around the metal frame that came on the fan?? I understand taking the screens off front and back, but couldn’t you have slid the metal frame snuggly into the plywood box??? Just askin’. the way I see it - Pat
Good question, I originally was going to build it that way, but figured it would be more compact and light for smaller shops. Plus it was fun.
Just to help protect your lungs, those washable filters are great but don't help with the microscopic dust that does the most damage to your lungs, so this is a great additional aid but don't count on it for the entirety of your dust scrubbing! ❤
Thanks for that, I Agreed. It’s just another tool to help reduce the dust in the air. It’s always recommended to wear a proper dust respirator. Even though I wasn’t wearing one in the video lol I also have a 3 micron filter on my dust collection system for the shop.
Mr. Wonkie, why did you mount the hinge in that direction? Folded the other way would eliminate the gap. I would have also made the speed control easily accessible, just in case. Another consideration, the filter access is on one side and the wiring access is on the other side. This is ok for standing, but if you wanted to hang it, things change. Good job though, and for me, everything in my shop is "a work in progress".
I guess I could’ve mounted the hinge to the top, it just didn’t cross my mind. I chose to mount all of the controls and wiring inside the box because I planned on using a remote to turn it on and off, and I have found over the years. The fan is always on high anyway.
Man, you guys are insightful good stuff
Wonky. Great job very compact
Thank you
I wonder if you could have had more filters for the same amount of fan. When the cdc was recommending building these with duct tape they were putting the fan on one side of a cube and air filters on four others. Would have made it bigger fer sure…
I wanted a more slim design, but more filters could let more are through with less restriction
Construction was excellent. Thanks for the context. I enjoyed watching.
looks nice and clean, thanks for the tips and tricks along the way too. doesn't look that wonky haha
Thanks, glad you enjoyed it
wonky. Nice little build... I'm thinking I need something similar.
Thank you
Witch way the flow goes and how good is catching dust ?
Good question, the fan is pulling the air through the filter. And it works pretty good
Excellent
Thanks
Wonky great idea and great video
Thank you, I’m glad you enjoyed it
Expensive. I did the same thing with a 20" filter and duct tape. Not as pretty but given the price of plywood and the fact that a 20" box fan will only last about one or two years it was a lot cheaper.
I had been just putting a filter behind it for several years and figured I wanted something different
Wonky! Great idea!
Thanks!
LOL, even a 15 watt bulb will light up a dark room!!!!!
🤔
Wonky. That is cool !!!
Thanks
What about placement? Where is the best place to put this?
I put mine in the corner near my work area
Wonky video. I appreciate that you were honest with your mistakes and corrected them. I probably would have made the same mistakes as well.
Glad you enjoyed it
Wonky... Just a question. Why on just leave the box fan in its box and just screw that into your wooden frame?
I originally thought I would do it that way, but I wanted it to be more compact for small shops, plus it was more fun this way
Wonky. Got a new sub
Thank you
Probably could have rewired that to have the speed control on the outside
I thought about it, but decided I always leave it on high anyway. And it’s easy to change with the filter out.
Why not just leave the fan in the housing and build around it?
Originally, I had thought to do it that way, but I decided I wanted it to be more compact for smaller shops. And it was more fun this way.
Nice. But I would have just duct taped the filter to the fan and called it good.
The suction of the fan will hold a filter in place, but that’s not as much fun as
Wonky, but functional. Good job
Thank you
I always asked myself why no one ever did it that way.
Exactly
Wonky…..nice job
Thanks, glad you like it
Those cheap box fans are not designed to pull air thru a filter. The cfm is greatly reduced and as the filter loads it drops off considerably. They are minimally effective as a air "purifier"
They may not have been designed for that. But I’ve been putting a filter on mine for quite a while now and it works pretty good from my experience. I also I’m using a washable filter so that I can keep it clean. But if you put too low of a micron Filter on there or you don’t clean it often enough you may have some flow problems, but that goes for any filtration system.
I use a filter taped to a box fan on all of my jobs. It works fantastic
Wonky. I've seen an extremely cheap version of this using 4 1" filters and some duct tape, and putting the fan on top. I like your version better! Need to build this for inside the house.
You could get a smaller micron filter too
wonky but nice!
Thanks
Wonky. Winky. Wonky. Donkey
Ha, something like that
Wonky, why not just put the piano hinge on top?
The piano hinge is on the top, or are you meaning why not have the whole top hinge? If that’s the question, I wanted everything around the fan to be sealed so that it would only pull air through the filter as much as possible
WHONKEE
Yup
That's a nice, wonky video!
Hey, thanks!
Wonky. Thanks
Glad you enjoyed it
Wonky 👍🏾
Glad you enjoyed it
?
Came out nice, but seems like really alot (ALOT) of work...
The work is really for the enjoyment and love of woodworking. Because it’s just fun.
Wonky Willie
Ha ha
rwonki. the heavy stuff will settle out of the air in a few minutes. This will keep the air stirred up so that they stay in the air longer. The small stuff that gets past your mucus membranes will not be filtered out by that setup. It will still get into your lungs. AND, grossly overbuilt. 2 bungee cords would hold a filter to a box fan.
When it’s hot out side there’s going be a fan running anyway, it may as well filter the air at the same time, and this is more fun then bungee cords