DIY Spot Welding Machine using Super Capacitor - Simple Super Capacitor

In this video, I will show you how to make a super capacitor using several high-capacity capacitors and use it as a spot-welding Machine. You can use this spot-welding machine to weld the pin to lithium batteries and connect them to each other.
In this video, I have used a capacitor with a 4700 uF Capacitors. And I charge them with a 12-24 volt power supply.
------------------------------
Click on the link to see more videos on this topic:
ua-cam.com/users/skillmake?s...
------------------------------
#spotwelding #welding #skillmake #spotwelding

[@Mad4400]

Why are there no wide shots of you using the device? It's only ever partly on screen. The last shot with knife blade and piece of wood was far more energy than those capacitors could provide, and for far too long. Those caps would drain almost instantly with how little resistance is in the design.

[@MrSteveod21]

Agreed.

[@mhnoni]

He is probably using >60 Ah 12v car battery and those capacitors are only for show off.

[@killzoldek6147]

All fun and good tell the capacitors do the capacitor things

[@XenyQ_OFF]

Well. It could happen

[@frankhovis]

Capacitors like that aren't designed to be shorted out and are likely to be damaged by being used in that way. You'd be better off using capacitors designed for camera flash units as they are designed for near instant discharge.

[@skillmake]

Thank you for the information you shared, I will definitely correct it in future videos

[@plutonianfairy]

What are those caps called?

[@davey2k12]

​@@plutonianfairyare you serious 😂

[@thekillerdog5228]

​@@davey2k12handy caps 😅

[@flyback_driver]

​@@plutonianfairythey are just normal 50v polarized capacitors and don't sweat discharging these this way. He's thinking of tantalum capacitors not regular aluminum film electrolyte caps like these. All the stores energy is going into the arc and work. Your only real worry is over voltage and go watch an electroboom video to see what happens.

[@robinsonreichel1268]

Wish, I had seen this any earlier…
👍👍👍

[@mynyasabut]

Good video, a curious data: those are not Super Capacitors (which are rated in Farads not microFarads) the ones you're using are normal electrolitic capacitors, your setup has only 37,600 microFarads which equals 0.037F, hardly a super capacitor

[@awaitingthetrumpetcall4529]

I like it. I think I'll copy your design.
I would add a momentary switch on the positive rod and include a high wattage resistor to discharge the device for storage. Thanks for posting!

[@VitMcG]

how eould you do it with the wattage resistor?

[@awaitingthetrumpetcall4529]

@@VitMcG I'd short the terminals.

[@lajoswinkler]

It's not wattage. It's called POWER.

[@mohammadfarzankia2636]

Well done 🎉

[@AcengNokGeboy]

salam dari Subang Aceng Nok Geboy selamat selamat selamat

[@user-lo7hm6xl5j]

Good 👍

[@keenowl1410]

Very cool

[@Nova-ez8wg]

One of the simplest

[@stelioscdn]

Excellent..

[@skillmake]

Thank you💗.

[@Haamim.b.h]

Perfect

[@skillmake]

thanks for watching

[@tatulaangler8980]

Can you make a DIY video on how to make a mini radio from discarded electronic components?

[@gregjones3660]

Just throw em in the trash. When youre ready, just start building.

[@breezeli6233]

6:18，The tin on capacitor poles melted.

[@mhnoni]

Behind the scene lol

[@prasantasahu5156]

Wow great ....noticed 😂

[@Sk8er_in_jeans]

So much power hehe

[@randyau4712]

You should zoom out your video to include your battery set up in your diy.

[@florianj6490]

you just need to read the description for more information. There is no battery in this setup: "And I charge them with a 12-24 volt power supply."

[@BigCrash911]

@@florianj6490 24V/50A power supply ))))

[@diy_wizard]

Very impressive!

[@skillmake]

Thank you! Cheers!

[@SanaiTaswi]

@@skillmake aa1¹11q1eQ11

[@skillmake]

Thanks for watching.❤️🙏

[@codewalters]

Thank you . Nice video. Keep going !

[@gunaysaridag4001]

merhabalar benim anlaadim 220 sureklimi akimi veriyor yoksa 220 yi kapatip sonra mi puntaliyo bilgilendirirseniz sevinirim tesekkurler

[@faruk33777]

You could buy a very good battery with the money you spent on capacitors, you wouldn't have to deal with it that much.

[@hasantey]

Nice to

[@congthochu]

Dòng sả của tụ rất lới khi ghép song song các tụ lại với nhau như này ok

[@moralcombat8096]

Только половина дела. Нужно между конденсаторами в цепь “+“ устанавливать катушки индуктивности! И подключить к AGM аккумулятору.

[@Mukulol]

Nice vid, i wanna make an induction melting machine

[@matthewjensen6380]

You can get a cool breakout board for only 20 dollars which is 120w

[@DIYGARAGE23]

i try this circuit with the same value but i don't get the same result, what kind of transformer you are using?

[@combycat]

Probably a microwave transformer with the secondary drilled out and replaced with about one turn of ultra thick wire.

[@lalande11]

So capacitors are just bullshit. A transformer of 150 amperes is enough to do the trick.

[@user-gn8xc7ks7q]

Bau omaiget 😃☺

[@user-ij1rc6em4v]

В конце кандеры отпаялись

[@Its-07]

Super video ever...♥️👍

[@skillmake]

Thanks 🤗

[@supachaiphothong1958]

Thank

[@mido.mido77]

الشاحن الموجب علي المكثف الموجب صح

[@nolomode14]

How do we remove carbon from beer?

[@mazharmuneer4463]

چارج کتنی دیر کرنا ھے اور کتنا وقت چلے گا

[@falseteethrealtarotAllRocks]

Very Nice... Excellent Actually...
🌲💖👃💖🌲

[@skillmake]

Thank you so much 😊

[@ElMalaMadre]

Y lo mejor que no necesita energia 😂😂😂😂😂

[@blackpink_1023]

Why i'm subscribe you youtube?
you are making perfect power full idea

[@diyathomevn]

you are a genius , you are very good , the welder is good and cheap

[@VitMcG]

my question is will this ever explode out of a sudden?

[@FishingFrustrationsUK]

did i see corect he conected the 12 positive to the cap negative surely thats incorrect

[@dcfix35]

😍😍💪🏻💪🏻💪🏻

[@adriangutierrezjuan7227]

La soldadura se ve de mala calidad se ve que se quema mucho

[@HoucineBenrais]

J,aime

[@QueenaxelChanel]

Pak,itu arusnya pakai arus AC apa DC ya

[@yussysu]

itu pakai arus DC 12 atau 24 volt

[@vikaslohar6354]

Super ❤❤❤

[@skillmake]

😊

[@glebberpena8599]

Qual voltage de alimentação, ac ou dc

[@Crusty-eu8wj]

DC

[@user-kn6go6zr2q]

The danger is that if it is parallel, it will short circuit

[@shashankb2191]

barath pay speaker into blooth speaker or anything usefull

[@oturanboga6225]

[@nikolaiatanasov5373]

На колко волта езахранването на тази схема защото нищо неказвате потози въпрос.

[@abderrahmanebakir6613]

12v24v

[@Dmitry_got]

и что, реально рабочая приблуда?

[@heavenlyAlex]

Цена кандьоров какая?)

[@astronomia13]

1,8 бакса

[@heavenlyAlex]

@@astronomia13 и года не прошло

[@rajendrasabnis6931]

Music band karke capacitor ka value batao

[@kjyhh]

How to desoldering all legs within 1 second😂

[@nguyentaniep5524]

ok

[@mycigna]

The video is fake, I use 10 X 10000uf and it did not work

[@alexanderbriancosmatos9685]

Falso esta usando una batería de carro

[@zilipoper]

Dude this is complete crap. take capacitors 350 V 800,000 uF then in 1 touch you will weld everything

[@mrphenomenal3616]

Project file

[@hasantey]

عالی بود

[@JH-sb1yd]

امتحان نکنی چرت و پرته...خازن دونه ای خدا تومنو 4 بار اینکارو بکنی باد میکنه میترکه...این هندیا اکثر فیلماشون فیکه

[@hasantey]

@@JH-sb1yd این داشمون ایرانیه هندی نیس ک

[@JH-sb1yd]

@@hasantey عبدلله عبدلاس...تو هر ملیتی

[@skillmake]

میخوای برات پست کنم زحمتشو نکشی که درست کنی و تست کنی ببینی فیکه یا نع؟

[@JH-sb1yd]

@@skillmake مگه من گفتم کار نمیکنه؟!این خازنا برای اینکار نیستند بعد از یه مدت کوتاه ظرفیتشون به شدت افت میکنه ...برای اینکار باید از خازنهای فوتوفلش استفاده کنی که صرفه ی اقتصادی نداره...ولی اگر به عنوان کاردستی برای مدرسه درست کردی خوبه

[@larshansen6083]

fake like the most videos...
No power supply, and current flow ~3sek only from electrolyt capacitors? Sure...😂

[@hakunamatata369]

please help turkey

[@skillmake]

My brother's mother tongue is Turkish and I will do whatever I can to help.

[@abdulkayyum_ilbeyi]

Greetings, the + and - of the battery are connected to the opposite reverse or does it matter?

[@pratamawidodo7449]

kok iso yo

[@heavenlyAlex]

Мда))

[@user-tj5nk7lb8l]

clickbait con

[@MarlesChanson]

It's always brown hands in these sketchy videos.... I'm assuming that these are the same people who work in 7-11's *cough* Apu *cough* cherry squishy anyone?

[@ricardobino7410]

As fake as possible.
If this person lied more it would become a politician.

[@Michael-oq2wx]

Халтура какая-то.

[@qarandorosti2599]

Undoubtedly fake!! Shame on you

[@thekillerdog5228]

How is it fake ? Its the same as just using a car battery's terminals 😂

[@rock10061984]

FAKE TITLE FAKE INFO