Hi, thanks for the video. Is there a way you can use a fader to control delay for example? That is instead of turning the delay knob to boost delay for a channel.
I don’t think so. We used to run into a second channel to do it in the old days. But we had fx returns and this mixer don’t have any. Maybe someone at Presonus can tell you. Maybe if you assign the delay to an Aux send and control it using that fader?
hello . thanks for the video . i have question about this sound card please? can we use the aux like outputs to have exactely the same sound like main output? thanks
If we have 4 band members and want to run in-ear monitors for each, can we run them out of the four aux channells? Or, how do we run in-ear out for the 4 band members if not that way?
Legend. Thanks so much. Try it out in a few hours. Really thanks heaps. While I got you though ha. I'm struggling with getting guitar pedals to work through Aux sends on the mixer. Do you need an additional something a rather? Thanks again.
It’s already routed through the mixer. Read manual on playing back your daw mix. Default set is on ch. 1&2 for fire wire, probably the same on usb mixers. But you set this return in the song audio setup.
I have the Studio Live 16.0.2 USB. My 4 Aux outputs are mono. I would like send a stereo Aux signal to my vocalist. How can I do this with the 16.0.2 USB. Can Aux 1 and Aux 2 be linked to send a stereo signal to my vocalist?
Yes you can link 1-2 and 3-4 together. 2 and 4 will control the Pan for each group. If you don't have the manual it's downloadable from Presonus. It's a very capable mixer but you'll get lost without a manual.
Hello question. Ok so if I press channel one ,I notice the fat channel EQ lights out to adjust and that goes for each channels but what about if I want to EQ the aux one , channels individually. I notice when I press aux one the fat channel pops out to adjust the overall EQ for the whole mix but can you do that for each channel like how you control the effects without affecting the mains
thank you so much for all the help . I now have the knowledge of using this mixer and plus the wireless remote control with my tablet is just so amazing .
Hello. Great Content. I have a question, I have the 16.0.2usb version and my speakers are connected to the main output (xlr) now i bought a fx pedal (big sky reverb). Is it possible to connect the pedal to aux 1 and use the pedal on all channels like the internal fx‘s? Thanks for your help. Best, a.
Hold the FX button in the master section down while powering on the mixer. It will factory reset. WHen you see the splash screen say "Presonus" you can let go of the button.
Hi, Im running my aux output straight to my stereo earphones but the sound comes out as mono- I can only hear it from one ear(left). Can you help? Any thoughts? - I use a behringer PM1 and Shure 215
the purpose was to avoid foldbacks -headphone jack is not a problem. we use in ear monitors but this presonus aux seem to not work for us. like i said, we use jack to xlr then xlr to PM1 Behringer then straight to in ear monitors.
If you are using in ear then why the headphones? Are you trying to monitor the entire FOH mix? Next to the Main Outputs there are L/R Monitor outputs. You can run some headphones into a Y chord and connect them there. You can control the level via the monitor controls. Hope that helps.
"By pressing the Select button for Aux 1, you can add dynamics processing and EQ to the overall monitor mix. " If you don't have the manual, you can find it at the Presonus website.
Question please can you add different effect in each channel. Like channel one vocal will have large hall and channel 2 or 3 a different effect if so how do you do that
@@TheGospelGuitarist ok so i have eq first voice on first channel and added desire effect to the channel then I press save and fill in as first voice and it gets save but when i go to second channel and put different effect it does gets saved but when I return to channel one the ffect that i save on channel 2 now is on one
Ok, first things first, go get the manual from the Presonus website and read it. At least watch all of my videos on getting around on this mixer quickly. I have a playlist which you've probably seen. I just followed the quick start guide which came with the mixer and made videos. Also down load all the software currect versions. It has a completely free verson of Studio One recording software which works with this mixer. No body can guide you through everything you need to learn. I have videos on most aspects of this mixer to at least get you to know what you are doing as a beginner. The manual is a must even if you don't like to read manuals, who does? Ok, I do, but I'm a tech computer guy too. lol
@@TheGospelGuitarist on this video tou specify very clealry about sending the effects and having esch channel more or less of the desire effect from eitjer effect A or effect B but my question is jow do you give each channel like channel 1 to 5 and sux 1 to 4 a tottal different effect , reverv, small hall, large hall, delay ect different for each
Great for newbie like me. Thank you
You’re welcome, be sure to hit the playlist for more.
thanks I needed this information!
Glad it was helpful! I have a whole playlist on the Studiolive.
Hi, thanks for the video. Is there a way you can use a fader to control delay for example?
That is instead of turning the delay knob to boost delay for a channel.
I don’t think so. We used to run into a second channel to do it in the old days. But we had fx returns and this mixer don’t have any. Maybe someone at Presonus can tell you. Maybe if you assign the delay to an Aux send and control it using that fader?
I don’t know if it route internally that way.
I’ll give it ago this morning and see what happens.
Thanks again for your great tutorials! I’ve learnt so much from them..🤙
Don't forget to subscribe and like! Thanks for watching, glad they helped.
Thanks, again!!!
hello . thanks for the video . i have question about this sound card please? can we use the aux like outputs to have exactely the same sound like main output? thanks
Yes
If we have 4 band members and want to run in-ear monitors for each, can we run them out of the four aux channells? Or, how do we run in-ear out for the 4 band members if not that way?
Yes you can do 4 separate mixes for your members that way.
Legend. Thanks so much. Try it out in a few hours. Really thanks heaps. While I got you though ha. I'm struggling with getting guitar pedals to work through Aux sends on the mixer. Do you need an additional something a rather? Thanks again.
Signal may be too weak to drive pedals. I would go with amp mics or modeling. Pedals are designed amp levels.
Hey hey, how do you route usb audio from a DAW back onto the mixer. Thank you. This series has been super informative.
It’s already routed through the mixer. Read manual on playing back your daw mix. Default set is on ch. 1&2 for fire wire, probably the same on usb mixers. But you set this return in the song audio setup.
I have the Studio Live 16.0.2 USB. My 4 Aux outputs are mono. I would like send a stereo Aux signal to my vocalist. How can I do this with the 16.0.2 USB. Can Aux 1 and Aux 2 be linked to send a stereo signal to my vocalist?
Yes you can link 1-2 and 3-4 together. 2 and 4 will control the Pan for each group. If you don't have the manual it's downloadable from Presonus. It's a very capable mixer but you'll get lost without a manual.
Hello question. Ok so if I press channel one ,I notice the fat channel EQ lights out to adjust and that goes for each channels but what about if I want to EQ the aux one , channels individually. I notice when I press aux one the fat channel pops out to adjust the overall EQ for the whole mix but can you do that for each channel like how you control the effects without affecting the mains
By pressing the Select button for Aux 1, you can add dynamics processing and
EQ to the overall monitor mix. -manual p.29
thank you so much for all the help . I now have the knowledge of using this mixer and plus the wireless remote control with my tablet is just so amazing .
Awesome! Do t forget to subscribe and hit like buttons. Thanks for watching!
I don't have a iPad but it is a cool option.
Hello. Great Content. I have a question, I have the 16.0.2usb version and my speakers are connected to the main output (xlr) now i bought a fx pedal (big sky reverb). Is it possible to connect the pedal to aux 1 and use the pedal on all channels like the internal fx‘s? Thanks for your help. Best, a.
Absolutely,
@@TheGospelGuitarist I see only absolutely. Can you tell me please how to do it? This would be awesome. Thank you 😊
Good afternoon! Do you know how to reset this mixer ?? thanks!
Hold the FX button in the master section down while powering on the mixer. It will factory reset. WHen you see the splash screen say "Presonus" you can let go of the button.
Hi, i have a 16.0.2 and i was wondering if i could use effects on main and monitor channels
Yes you can. Rout them to the AUX you have monitors located on.
Hi, Im running my aux output straight to my stereo earphones but the sound comes out as mono- I can only hear it from one ear(left). Can you help? Any thoughts? - I use a behringer PM1 and Shure 215
Try plugging the headphones into the headphone jack.
the purpose was to avoid foldbacks -headphone jack is not a problem. we use in ear monitors but this presonus aux seem to not work for us. like i said, we use jack to xlr then xlr to PM1 Behringer then straight to in ear monitors.
If you are using in ear then why the headphones? Are you trying to monitor the entire FOH mix? Next to the Main Outputs there are L/R Monitor outputs. You can run some headphones into a Y chord and connect them there. You can control the level via the monitor controls. Hope that helps.
can I eq aux sends?
"By pressing the Select button for Aux 1, you can add dynamics processing and
EQ to the overall monitor mix. " If you don't have the manual, you can find it at the Presonus website.
Question please can you add different effect in each channel. Like channel one vocal will have large hall and channel 2 or 3 a different effect if so how do you do that
Yes simply select the channel and use the fx section to set it to whatever you need. Every channel can have something different going on.
@@TheGospelGuitarist ok so i have eq first voice on first channel and added desire effect to the channel then I press save and fill in as first voice and it gets save but when i go to second channel and put different effect it does gets saved but when I return to channel one the ffect that i save on channel 2 now is on one
Ok, first things first, go get the manual from the Presonus website and read it. At least watch all of my videos on getting around on this mixer quickly. I have a playlist which you've probably seen. I just followed the quick start guide which came with the mixer and made videos. Also down load all the software currect versions. It has a completely free verson of Studio One recording software which works with this mixer. No body can guide you through everything you need to learn. I have videos on most aspects of this mixer to at least get you to know what you are doing as a beginner. The manual is a must even if you don't like to read manuals, who does? Ok, I do, but I'm a tech computer guy too. lol
@@TheGospelGuitarist on this video tou specify very clealry about sending the effects and having esch channel more or less of the desire effect from eitjer effect A or effect B but my question is jow do you give each channel like channel 1 to 5 and sux 1 to 4 a tottal different effect , reverv, small hall, large hall, delay ect different for each