Bought these two weeks ago & just now had the chance to install them. Took 5 hours. The wiring harnesses included were nonfunctional, the pins clamped on had apparently cut the wires on the inside. Also, nearly impossible to remove the wheel liner without breaking pins & rivets to even access the wiring. Even after all the troubles though, mine are installed and working properly. They look awesome.
Hi Sir. my Car Jeep Wrangler Unlimited Rubicon JL 2022 2.0L , I installed your lamp, but the dashboard says check the light : Messeger “Indicators Fault Right and Left “ . I Help Me 😢
Hey there! Sorry to hear you're having some troubles. Please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that.
I just installed these on my jl, and the brake lights flicker if you step on the brakes and the running lights are off. If the running lamps are on then the brake lights don’t flicker.
Sorry to hear about that! Please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that. We will be out of the office tomorrow, but back on Monday the 2nd!
Do you’d till have regular turn signals if you choose not to tap the wiring in the front for the sequential turn function. I’m also assuming these lights would work on a 2023 Willy’s 4xe with halogen tailights?
Correct! The exterior of the tail light will still flash as a road-legal turn signal, in a fashion similar to the stock LED tail light. You can see it in our install video at the 2:20 mark, linked below. ua-cam.com/video/SlL9z4swCrA/v-deo.html
They can! They'll be plug-and-play, they'll retain your blind-spot monitoring function when you swap the module over, and you won't have any dashboard errors.
They're 10% OFF through midnight tonight, it would be a great time to pick up a set! www.formlights.com/2018-2023-jeep-jl-wrangler-led-tail-lights-pair.html
I think these would be better if only the centre lit up when the breaks were touched. If you glanced away you would hardly notice if the brakes were even on.
I installed these on my wife’s Jeep. These are great looking lights for sure. BUT, ONE THING…. These are only held in by the 3 screws that attach the main bracket to the actual taillight. The screws used are tiny and have very little grip. Just compare the OEM light bracket screws to the FORM light bracket screws. I upgraded my bracket screws for the FORM lights to #8 x ½” Pan Philips. I feel they are much more secure now. 👌🏼
Nice looking lights… I’ll keep my mind open to them when I go to upgrade my JL.
Thanks for checking them out, Brian!
Bought these two weeks ago & just now had the chance to install them. Took 5 hours. The wiring harnesses included were nonfunctional, the pins clamped on had apparently cut the wires on the inside. Also, nearly impossible to remove the wheel liner without breaking pins & rivets to even access the wiring. Even after all the troubles though, mine are installed and working properly. They look awesome.
Sorry to hear you had some troubles, Ethan! Glad to hear you like them, though!
Thank you for sharing this video, the lights look cool!
Of course, Alicia! We appreciate your support! 👊
Oh how I wish you all made headlights.
Hi Sir. my Car Jeep Wrangler Unlimited Rubicon JL 2022 2.0L , I installed your lamp, but the dashboard says check the light : Messeger “Indicators Fault Right and Left “ . I Help Me 😢
Hey there! Sorry to hear you're having some troubles. Please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that.
Did you get it fixed ?
@@Aceinfinity-le8zc There is no plan to fix it. Connected the connector but the error message appears on the car. Need to check the light
@@formlighting There is no plan to fix it. Connected the connector but the error message appears on the car. Need to check the light
@@DuyJeepChannel Sorry to hear you are still having this issue. Have you been able to reach out to our customer service team?
would you guys ever make a nice LED headlight for the jeep JL that’s not too Gody and still looks clean and OEM style quality
It is certainly something we will consider!
Do they come on with the normal running lights, or do they turn on when the headlights are turned on?
They do not light up unless the parking lights or main lights are activated, similar to the OEMs.
I just installed these on my jl, and the brake lights flicker if you step on the brakes and the running lights are off. If the running lamps are on then the brake lights don’t flicker.
Sorry to hear about that! Please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that. We will be out of the office tomorrow, but back on Monday the 2nd!
Do you’d till have regular turn signals if you choose not to tap the wiring in the front for the sequential turn function. I’m also assuming these lights would work on a 2023 Willy’s 4xe with halogen tailights?
Correct! The exterior of the tail light will still flash as a road-legal turn signal, in a fashion similar to the stock LED tail light. You can see it in our install video at the 2:20 mark, linked below.
ua-cam.com/video/SlL9z4swCrA/v-deo.html
Will this fit Jeep Wrangler 2007 model?
Hey there! These are only compatible with the 2018-2023 JL Wranglers.
Can these be installed on the JL with xTreme Recon Package and halogen taillight?
They can! They'll be plug-and-play, they'll retain your blind-spot monitoring function when you swap the module over, and you won't have any dashboard errors.
They're 10% OFF through midnight tonight, it would be a great time to pick up a set!
www.formlights.com/2018-2023-jeep-jl-wrangler-led-tail-lights-pair.html
I think these would be better if only the centre lit up when the breaks were touched. If you glanced away you would hardly notice if the brakes were even on.
I installed these on my wife’s Jeep. These are great looking lights for sure. BUT, ONE THING….
These are only held in by the 3 screws that attach the main bracket to the actual taillight. The screws used are tiny and have very little grip. Just compare the OEM light bracket screws to the FORM light bracket screws. I upgraded my bracket screws for the FORM lights to #8 x ½” Pan Philips. I feel they are much more secure now. 👌🏼
Thanks for the feedback! We are happy to hear you're liking them!
Is there a way to disable the start up sequence?
Hey there! There is not a way to disable this at this time.