Just put this speedo on a 99 katana with a digital cluster. I had to buy the mechanical speed sensor to make it work, luckily Suzuki left the posts in the hub so it worked out
Thak you for sharing. I've trying to figure out how to solve this for over a week until I stumble over this video... I have fixed the neutral with the one relay but do have to do the same with the turn signal? Else the turn led always stays on... Even if the flicker is not working how did you do it. I tried with a second relay which works but I don't know it is right to use a relay with a switched ground signal coming from the bikes flash relay which in it's turn makes the second relay go on and of every time the flicker goes on and off. Maybe it drains the battery?
Hi, i see form previous messages you might of done a drawing of how you've got the neutral light to work. could i have a copy please? trying to build my first cafe racer with one of these speedo's. TIA
Hey awesome video man! I had a question. With mine, when the neutral light switches off (in gear) so do the highbeam and indicator lights. Is this the same problem you were having? Thank you so much
I used this guide on basically the same exact set of gauges but I’m from America so I decided to switch to a version that has MPH and an oil and fuel light as well. It only has one ground that they label as “negative pole” my neutral light worked just wired in without the relay, but my oil light refuses to work with it without the relay I’m pretty sure each one works the same as yours off of grounding but I don’t know how I should go about trying to tackle this. Any advice would be appropriated. It’s on a 99 katana 750
howdy with this what does everything go to. like the wire made up with the other one jumping over and then then other two i have tried how you say and it doesn't work
may i ask sir. my old speedometer on my kawasaki has an engine fault light indicator. then i bought a new design speedometer all works well but i can't find where to connect the engine fault indicator wire from my speedo to my motorcycle.. i can't find the wire from my motorcycle but the speedometer has a wire for engine fault indicator... please help.
First video I've watched that has broke that down step by step👍very nice.... Thanks
you're the chosen one 🔥
Just put this speedo on a 99 katana with a digital cluster. I had to buy the mechanical speed sensor to make it work, luckily Suzuki left the posts in the hub so it worked out
Very good video!!! Thanx man.....
Just done it thanks,, works perfect 👌
Thak you for sharing. I've trying to figure out how to solve this for over a week until I stumble over this video... I have fixed the neutral with the one relay but do have to do the same with the turn signal? Else the turn led always stays on... Even if the flicker is not working how did you do it. I tried with a second relay which works but I don't know it is right to use a relay with a switched ground signal coming from the bikes flash relay which in it's turn makes the second relay go on and of every time the flicker goes on and off. Maybe it drains the battery?
Hi, i see form previous messages you might of done a drawing of how you've got the neutral light to work. could i have a copy please? trying to build my first cafe racer with one of these speedo's. TIA
This helped so much, any chance of a wiring diagram 😜
Give me a couple of days, I’ll draw one up
@@Beachmangarage I need this wiring diagram! Where can I find it?
Hey awesome video man! I had a question. With mine, when the neutral light switches off (in gear) so do the highbeam and indicator lights. Is this the same problem you were having? Thank you so much
I used this guide on basically the same exact set of gauges but I’m from America so I decided to switch to a version that has MPH and an oil and fuel light as well. It only has one ground that they label as “negative pole” my neutral light worked just wired in without the relay, but my oil light refuses to work with it without the relay I’m pretty sure each one works the same as yours off of grounding but I don’t know how I should go about trying to tackle this. Any advice would be appropriated. It’s on a 99 katana 750
Do you need to use led relays ?
howdy with this what does everything go to. like the wire made up with the other one jumping over and then then other two i have tried how you say and it doesn't work
I have a neutral light when in gear and gear count wont display 1st. And when in neutral 5th gear is displayed. Any ideas?
A picture is worth a thousand words! Do you have a diagram of this? I found it difficult to follow this unfortunately.
may i ask sir. my old speedometer on my kawasaki has an engine fault light indicator. then i bought a new design speedometer all works well but i can't find where to connect the engine fault indicator wire from my speedo to my motorcycle.. i can't find the wire from my motorcycle but the speedometer has a wire for engine fault indicator... please help.
What bike/year is it?
@@Beachmangarage it's a kawasaki rouser ns200 year 2016.
@@Beachmangarage sir i have the same speedo, but when i turn to 1st gear all lights will turn off.