How to Make a Carbon Fiber Wing [DIY] (with 3D Printed Molds)
Вставка
- Опубліковано 11 лют 2021
- #carbonfiber #wing #3dprint
How to Make a Carbon Fiber Wing [DIY] (with 3D Printed Molds)
Making a Carbon Fiber Wing with 3D Printed Molds
How to Make 3D Printed Mold.
How to Build a Carbon Fiber Wing [DIY] (with 3D Printed Molds)
카본 윙 만들기 [DIY] (3D 프린트 몰드)
카본 윙 만드는 방법
3D 프린터 몰드 만들기 - Авто та транспорт
![How to Make a Carbon Fiber Swan Neck Wing [DIY] (with 3D Printed Molds)](http://i.ytimg.com/vi/eq5fILj1TOM/mqdefault.jpg)
![How to Make a Carbon Fiber Swan Neck Wing [DIY] (with 3D Printed Molds)](/img/tr.png)
3D Model Files (STL) - Wing_1600mm
drive.google.com/drive/folders/1BtlMfWOQ4uXkm2HxZunru0MbpTIhzzxi?usp=sharing
Wow! Thanks for sharing Hoon Sung! Tell me please, which software did you use? Solidworks?
What Filament did you use? ABS?
could you make one for me please?
@@redzone5655 Fusion 360, its Free*
каков полный бюджет по материалам?
Can we all just can a moment to appreciate that he appears to be doing this on his dining room table :)
This is getting close to “how to basic” 😂😂😂
Haha, it's just missing the eggs!
It is very basic if you compare it to modern way of carbon fiber part production.
I wouldn`t even care how simple it is made, if i ONLY could do it legally in my country.... -.-
Hes guna add an egg to the epoxy watch🤣
Your M4 is one of the cleanest builds out there. And the fact that you build most parts on your own makes this the most beautiful M4 for me. Planning on doing a project like this too. Hope I will ever have the same skills as you have.
This video is amazing. No music, noises. Just a step by step with a clear shot of what he's doing and a bit of humor to bring it together. Great job as always!
Never cut square corners into composites, it creates a stress riser and will crack. Next time, drill a hole in each end of the slot, then cut, you will thank me later. Nice job otherwise!
Can you elaborate further for me please? I am planning on also working with carbon fibre(starting off a bit smaller) soo i will appreciate some pointers if you would like!!
Waiting for the DIY Carbon engine hood project 🥰
Up
Yes.
if you want a detailed video (well more like 3 videos) then you should watch the first few videos of easy composites ltd, they sell all the stuff you need and doing a really good job explaining how its done and their first show off project was a full carbon fibre hood ;)
Really respect your DIY spirit and problem solving. It may not be the "right way" in the eyes of professionals, but your results speak for themselves! Thank you for showing the whole process, not just your successes (the carbon filling of the wing seam was simple and effective.
I think the most impressive thing is that you got all of the mold pieces to print without lifting at the ends! Props to your bed level. Nice job on everything!
A pro tip is to not use the sealant tape as full wide but stretch it. We were able to reduce our usage of sealant tape tenfold by stretching the tape.
Also, please use water to reduce the amount of airborne dust when cutting and sanding.
Hello, friend.
I've always thought it was expensive compared to the amount of sealant tape.
Thank you for your advice.
Now I can see why people change so much for carbon fibre parts. A lot of work goes into production. Great job
What a great job!
Once again, video can't tell viewers how much work and time really were spend on it)
You made such a great step from basic laminating to really advanced moulds and proper complex details!
Nce vid! you should try make a carbon fiber hood for the bmw, think about it!
This was incredibly neat, love your work.
Its flimsy because your carbon weaves are all in one direction, you need to interchange them 45 degrees. For next time. :)
I could agree with you if the pattern was not x threaded only strait line. with X pattern there is no really meaning how you put them. Allso you never put X on X by hand they allways gona be disaligned to each other. If you realy want to build something strong. before the resine layers should be sawed with carbon fibers thread to create 3Dmentional structure not two layers glued together.Than It whould make a diffence.
Not to mention the way he joined the two halfs by stuffing a piece of cloth between then then cutting off. the only thing that would be holding them would be the epoxy he put on it. should have had a flange and a receiver flange on the other side of the part so they overlap and join that way.
Also gonna have some serious galvanic corrosion which will lead to the wing flying off sooner or later. From what I saw the aluminium was not isolated from the carbon which is a no no ^^
@@aeywyn5230 ; should have placed a strip of glass fiber where the aluminum sits, that would be enough isolation. So much work, so little thought, so much filament (costly).
No dude the adding 45 degree fibers would not help that much since the fibre direction with those is not in line with the force. If strength were an issue UD fibers in line with the wing would be the answer.
This is the first video of yours I’ve come across and I’m loving the editing
Who else can say “i made that wing” or all the other carbon stuff youve put on your car!! Amazing youre the reason i started making my own carbon parts on my gt500. They arent as good as yours but im getting there im doing smaller peices first. Love the videos!!
Such a sick job man. I love seeing a project completed with minimal tools and lots of know-how.
You could be the official wing supplier to Ramy RC!
I would suggest laminating foam core sandwiched between the middle of your lay ups to add rigidity and highly advise against using aluminum directly in contact with Carbon as it will react and corrode over time if the materials aren't kept entirely segregated from eachother. Otherwise good work. Power tools like sanders,spray guns, and pressure washers would speed up your process as well :)
Really like your videos and looking foward to every single one you gonna upload! It's such a inspiration to do even more things on my own! 💪
알고리즘에 의해 왔는데 어쩌다 보니 영상 정주행 했네요ㅋㅋㅋㅋㅋㅋ 멋집니다!
Very nice! And glad to see some of your older episodes/things you have made on your car!
Not many people can say they built everything aftermarket on their car and have it look like that. Kudos to you man you do a fantastic job.
Nice execution on the moulds, good job 👍
Always a pleasure watching your skills. How about some videos about your M4 and what all you have done to it.
Well done , it's a great job that requires precision , The rendering is really beautiful !
영상 잘 봤습니다~
새해 복 많이 받으시고 건강하세요
Galvanic corrosion will effect those aluminum mounts. Next time put a ply or 2 of fiberglass down. There is also an easier way to do a more consistent seam than that. Love your videos though.
Could you share how you would approach the seam on this part?
i don't know how many times i saw this video so far but each time i learn something new from it
Just amazing! I love your videos! You inspired me to start working with carbon fiber! Unfortunately for me been a lot of fails 🤣 but I’m getting there! How of did it take you to get the spoiler done?
nice work bro love the quality of the parts and the videos!!
안녕하세요!! 영상 항상 재밌게 보고있어요!!! 혹시 카본작업 집안에서 하기에는 냄새나 카본가루가 심한가요..??
Very smart! Liking how you went made the mould.
This is an awesome build!
와 진짜 대단하세요....
혹시 실례지만 바이크용 카본머플러 종류도 수리가 가능할까요..?
와 미친 몰입감.. 바로 구독박았네요
장사하셔도 대박나것는데요 ㅎㅎ
배우고싶을지경.. 멋지네요!
Cool video, that wing looks very cool...
That's a wonderful piece of art...✨😍
Arrrgghhhhh, why am i always impressed🔥🔥 멋있는👌
For me... you´r best work jet!!!!!!!!!! love it
loved your vids man!
Beautiful work 👌🏼
Very much informative....loved it. I wanted to know how did you decide the shape of the aerofoil?
와! 유튜브 복귀 축하드립니다!
혹시 카본파이버 사업할 생각 있으세요? 학교다닐때 카본파이버 연구실에서 잠시 있었는데 저렇게 집에서 만드는 거보니 신기합니다
Absolutely 💯 🔥 man. Great work!!!
Great work, man! Id like to see a video on how you made your little "vacuum pot". That is pretty clever. Keep it up! Subscribed!!!!!
Awesome video mate, the key slapping had me in tears 😆
Bravo , c’est du beau travail qui demande de la précision , Le rendu est vraiment beau !
This is really awesome, thank you
Bro You are my inspiration, congrats from México
엄청나게 부러운 기술을 보유하고 있으시군요 차쟁이로써 엄청 배우고 싶어지네여
thats awesome good job man! next project would be carbon fiber hood for the M4 ahahaha
久しぶりに来た〜！！
まってました！
I just love a bit of carbon 👍👌🏻
1-может показаться, что пенопласт не нужен, но он придаёт дополнительную жесткость, а также гасит колебания
2- увидев герметизирующий жгут, подумал, что глупо формовать пропиткой, а не инфузией. Но увидев вакумный компрессор понял, что решение правильное (такой компрессор не даст нужного Аккума для пропитки инфузией)
Поэтому считаю, что получилось отлично. Темболее заморочился с алюминием. Но на будущее и остальным совет, можно было использовать пару слоем однонаправленной Ткани, уложить вдоль крыла, тем самым увеличив сопротивление на изгиб. Так как поперёк крыла нагрузки не великие.
와.. 센더기 안쓰시고 손으로 사포질을... 대단합니다
영상 빨리빨리 더많이 올려주세요
현기증 난단 말이에요
Nice! I've also got a white M4 Competition with a few parts carbon skinned thanks to your videos 😊
OMG 😆
It’s really Amazing!!😂🤙
amazing work sir !
this is the 1st time i saw people using resin and hardener, and then sand paper it and then, put the 1st layer of product part resin, and the sand paper it again, respect your hands on btw
Awesome video man
This Guy deserves a sub
정말 배우고 싶은 기술이네요..
how did you choose the wing airfoil profiles and what they are? awesome job man
Fantastic. Ur very talented
amazing job as always bro you are getting better and better in every video congrats on your success I wish you the best
Glad to see he got the vacuum pump!
와 장인이시네요👍🏻👍🏻👍🏻
That’s so cool 🔥🔥🔥
so glad found your channel 👌
대단하십니다 정말!
제차도 언제 부탁좀..^^
Keep up the great work 🤙🤙
Amazing skill. Congratulations.
Great work💪🏼💪🏼
Great job i’ve been laughing out loud alone in my house with the introduction well done
Круто! Очень круто! Уже сбился какой видос подряд смотрю! Один вопрос, почти всегда без лачки? топкоат и полировка?
Once again amazing video
Love your Videos you have give me so much inspirations ! Keep Going you are awesome !
Fantastic video!
대단하시네요~^^
excelentes vídeos, que programa de diseño utilizas?
Bravo, merci à vous du partage de connaissances !
우와~!! 만들어달라고 하고싶어지네요
따로 판매하시나요?
U r alien😂😂😂...great work!!salute!!
GOOD WORK BRO‼️❤️🔥
구독하고감니다 저도 배우고싶은기술이라 흥미잇게보고갑니다
혹시 3d 프린터 모델 뭔지 알수있을까요?
그리고 영상처럼 몰드만드는 작업에 좋은 3d 프린터는 뭐가있는지 추천해주심 좋겠어요~
m4에 스포일러를 직접 만들고 다니까 이뻐보이네요
YOU HAVE BROUGHT GREAT JOY TO ME THIS DAY, GRATITUDE!
2:07 lol rip
Wyglada mega!!!! 👍👍
Like who needs to buy aftermarket aero parts when you can make your own. Great work man!
Lourd , tu est super inspirant !! Merci pour le partage
Awesome!!!
How do you scale the 3d spoiler project and get a similar size for life size car spoiler before you print it out? Hopely you can make other 3d setup tutorial for next your videos. Your work is truly good man
kinda want to get into carbon fiber modeling and crafting now
금손이시네요
2:07 best part in the video man, it made my cry XD