Wow simply amazing....yesterday I visited hydroponics farming near to my place and instantly I fell in love with this hydroponics. ..And I have started searching for diy setup, and I got it in this video.. Thanks a lot for sharing ...
Thanks for the video, I have some questions: 1. How do you balance nutrient A and B and measure concentration? 2. Do you have issues with mosquitoes in the water tank? 3. Is this an NFT method or a type of DWC? i ask because the water pressure seems high for NFT.
Dear please make video on nutrition supplements, it's essential, set up to koi bhi bana lega nutrition kaise dena hai, from 1st stage to harvesting tak iska video banao
would have been nice for you to indicate what he brown balls in the grow cups with plants are.. and their use. Also, is it plain water or does the water have nutrients added? thanks for the video on the stand and pipes!
The brown balls is a clay pebbles , you can use lava rock or Hydroponic sponge , it's a grow media to support the plants and provide Darkness to the roots , yes you need to add Hydroponic liquid fertilizer to the water . Hydroponic is simple just provide the required nutrition and oxygen in the water .
Hi! Thanks for this informative video… can I ask what are the little plastic cup things you put the clay pebbles into please?? (They fit perfectly into the holes)
What is that you put into the bucket that you attached with a blue tube which causes the water to filter? Is it a pump? Would like to know. Am watching from Trinidad 🇹🇹
Sorry if this question sounds stupid because I'm also new to the hydroponic system. But what's making the water recycle? Throughout the whole hydroponic system you have?
The hard work you are doing in hydrophonics is appreciable . At the same time if you think over expenses u e will be suufiicient to do three to five times more agriculture in openland. The neutrients and natural elements will be abundant in the crop grown on land than any hydrophonics and midde thotas. The will stick to legs and hands but the satisfaction and economics will be more. So it left to thinkers and a suggetion only.not discouraging..
Thank you for the video. Can you grow cannabis in such setups? I am talking about the root mass. Suppose if I use a 6" pipe, will the space inside and between the holes accommodate the root mass of the autoflowers?
Have a 8x12 Greenhouse. Want to go hydroponic. Want to plan a 8x12 U shape system with an inside and outside pvc. Not sure I can do that. Any ideas would help.
Hii, im new to this hydroponic and interested to try. you really made it looks doable :) may I ask what did u use for the decoration (like cotton / rocks) at the end of the video? thanks!
Hi there ! Besides the system you need to get net cups , rockwool ( to germinate the seeds ) ,clay pebbles to make the seedlings stand inside that cup and cover the roots from the light . Check this video you may like the system design , any question please comment I will answer . thnx ua-cam.com/video/VK-dpoH5byo/v-deo.html
Ooof, this stuff is way harder than it looks. Careful so the clay pebbels don't get in the water, cause then the pH goes high n everything turns yellow (using perlite instead is recomendable). Also it is worth mentioning that the pipes get insanely heavy when filled with water, and the water needs to be a certain hight for tiny new things to reach it with their roots. There also need to be a certain angle on the pipes, so the water doesn't build up too much and the shelves (or whatever you use) crash down and break, and I'm not certain about this angle yet, but using PVC to hold up the pipes looks really risky and unstable (especially on only 4 legs like that). Also if you are doing this in an area were you don't wanna spill water, it is worth concidering that the "bucket" needs to be able to hold considerably more amounts of water in order to at some point drain the pipes. The "bucket" should also be covered so no light comes through to the water, as this would cause algeas to grow in it. Having a way to drain the "bucket" easily, might also prove to be handy.
could you please expain about the motor used and where should the both ends put and how is the cycle moving, what is the sponge type used in the plant can it be replaced by something else if not available
Hi there , my Water pump I used 38 watt Max . height 5.2 m Max .flow 5800 L/h My water pump got tow outlets , so I link each 2 pipes together water will flow from pipe to another and back to the tank . If you couldn't find the Sponge ( rockwool ) can replace them with clay pebbles , stone..
what's the size of the hole? It seems your drill bit was diy'ed. Care to share? I'll build one for my wife. Very straightforward and very helpful. Thanks! More subs to come!
Hydroponic system . ua-cam.com/video/sfa-ga4x8U4/v-deo.html
an you send links of buying material online
@@thedeadlyd355
I don't have any , I just buy from local hardware store .
What's the size of hole you drilled?
What's the size of hole?
@@manassharma9496
55 mm
Wow simply amazing....yesterday I visited hydroponics farming near to my place and instantly I fell in love with this hydroponics. ..And I have started searching for diy setup, and I got it in this video..
Thanks a lot for sharing ...
hi there ! thanks
you can visit my channel for more setup designs.
I would drill holes first then seal ends. Easier to clean out plastic pieces
they only sealed one end before drilling... how i would also do it.
Also, put your fittings together on the end cap prior to gluing it on the pipe.
For sure, drill everything first
And clean up those PVC pipe edges
That's my thought too,and it's easier to put the end fittings.
Many and many thanks to you for such a simple but helpful video
--- Kishore, New Delhi, India
you're welcome
I would suggest screwing the pieces on the end caps before gluing them to the pipes.
Very good CongratulationsI like it very cleverly imaginativeVERY clever bravo super👏👏👏👏
This was super motivating! [05:53] The results you’re getting are amazing! 💚 Makes me want to keep learning."
you can watch other videos with more info ..
bro i like your video's. im going to try all this and more thank you im going to star a garden pretty soon. God bless you.
I tried this idea for my sons school project and got first place thank you I will subscribe to your channel
you're welcome
Thanks for the video, I have some questions:
1. How do you balance nutrient A and B and measure concentration?
2. Do you have issues with mosquitoes in the water tank?
3. Is this an NFT method or a type of DWC? i ask because the water pressure seems high for NFT.
Hi sir ading journey tv galing ng ipinost mo hydroponic garden pwedeng kong gawin yan thank you po godbless
What size of pump did you use
Dear please make video on nutrition supplements, it's essential, set up to koi bhi bana lega nutrition kaise dena hai, from 1st stage to harvesting tak iska video banao
Quality video! And detailed. Noiceee
Thank you ❤️
would it not be better to leave one end open to get out the cuttings from holes first, then seal both ends
I believe you can even cut pool noodles into pucks and use those to hold the plants... I've never tried that, but it's on my list lol
Super genial, saludos desde Bogotá Colombia.
thanks... i love Colombia.
Watching here kabayan good morning sau kabayan nice sharing sir
Welcome .
You’ve perfected the two finger in them hole technique 😉
Thank you learned a lot.
Wow very very nice. Good Job ❤️👍
Is that 15cm from center or edges?
Wow such an amazing job, but I'm confused just on the fertilizer that you were using to grow it , it's inorganic fertilizer or organic?
not organic..but the same fertilizer they use to grow on soil
To anyone reading this, I hope you have an amazing day and stay safe!
Pl explain water connection in detailed. I AM a housemother and want to do it. So please give details about water connection
Most of the drillings could done before you glue the end caps on. Just a thought for convenience sake.
Yes you can drill the holes before you glue the end caps .... thanks for your tip.
would have been nice for you to indicate what he brown balls in the grow cups with plants are.. and their use. Also, is it plain water or does the water have nutrients added? thanks for the video on the stand and pipes!
The brown balls is a clay pebbles , you can use lava rock or Hydroponic sponge , it's a grow media to support the plants and provide Darkness to the roots , yes you need to add Hydroponic liquid fertilizer to the water .
Hydroponic is simple just provide the required nutrition and oxygen in the water .
Yes the brown balls or sponges??
@@DIYGARDENWITHBBcan you please tell us what type of nutrient and in what quantity we need to give plants
Hi! Thanks for this informative video… can I ask what are the little plastic cup things you put the clay pebbles into please?? (They fit perfectly into the holes)
55 mm hydroponic net cup
@@DIYGARDENWITHBB thank you very much BB! I found some :)
Can I also ask what kind of pump you would recommend please?
very informative video 🇵🇭
sir, saan po kayo bumili ng mga fittings? thnx and more power to your channel.
a great idea
I'm curious why you didn't route the water pipes so that is pumps into 1 end and travles through all 4 of the 4" pipes before exiting.
The first or the next tube will overflow before it reaches to the end. The pump stronger , compared to the flow of water from one tube to another.
aeration
Very good information and idea
Question: why not make it one continuous loop? One water inlet and one outlet? Maybe that's a dumb question since I know nothing about hydroponics
not a dumb question, in hydroponics you need to understand the concept and design your system that suit with your space and other conditions
Iska koi timing hai ya fir machine ko 24 ghnte chalana hai
Very good at teaching. Will try it.
Thanks .
What would be the water level and how long would the pump run on for? Would there be cycles?
Id have to run the drain hoses all the way down the sound would drive me crazy, all mine are silent unless Im running low
All said and done 😊 but did i miss what feeds the plants its not just water ???
Use hydroponic fertilizer A B.
What type of water pump did u use??
Hi should we keem pump running all the times are install some timer with it.
Hi there !
You can use timer 15 min on / 15 min off , or on day time and off at night.
Where do you get those nice adapters with the dual gasket and nut assembly?
the local hardware store.
i would interconnect middle two pipes together , then give only 1 input water, so the water fully circulates
The last pipe he put, is it having a pump?
Donyou change water in this system, and is there an easy way to empty these pipes?
Im in a tough situation where can i find the pvc tank connector ??
very nice and simple way to perform
Thank you ❤️
Check this out..you may like .
ua-cam.com/video/VK-dpoH5byo/v-deo.html
Good info. Saya subscribe dan like
Thnx
Having trouble finding the 15 mm PVC sockets. Would you please provide product number and supplier name? Thank you.
What is that you put into the bucket that you attached with a blue tube which causes the water to filter? Is it a pump? Would like to know. Am watching from Trinidad 🇹🇹
submersible water pump
@@DIYGARDENWITHBB what are the power of that pump? How much of the flow rate?
Kreatif. ❤
What is the "grey socket" called. I have looked EVERYWHERE for these and cannot find them!
tank connector
Im struggling to find the fittings you labeled socket.
Hi, where you bought the pipes? Or do you know a website where can i buy for a big big farm? Thank you
What is that pvc fitting called which you inserted in the hole for water inlet
Sorry if this question sounds stupid because I'm also new to the hydroponic system. But what's making the water recycle? Throughout the whole hydroponic system you have?
I'm using water pump.
The hard work you are doing in hydrophonics is appreciable .
At the same time if you think over expenses u e will be suufiicient to do three to five times more agriculture in openland.
The neutrients and natural elements will be abundant in the crop grown on land than any hydrophonics and midde thotas.
The will stick to legs and hands but the satisfaction and economics will be more.
So it left to thinkers and a suggetion only.not discouraging..
Depend on were your home ... And your home have open area to farming ...i think
If cared for properly, hydroponics always provide greater yield
What are the small mud cakes that the plants are kept in. What is it made of. Pz reply soon. I have a modal to complete.
Clay pebbles
Whole day do we have to run motor for setup?
What will be the electricity cost occur if we run 2 motors for your setup, please details us.
Use timer on and off
What is the name of filltng with thred and washer which connect the elblo with end cap
What kind of chemical and fertilizers are used in it
Thank you for the video. Can you grow cannabis in such setups? I am talking about the root mass. Suppose if I use a 6" pipe, will the space inside and between the holes accommodate the root mass of the autoflowers?
I recommend using the Dutch bucket system
what the name of the pvc socket you used or where can i get a similair one ?
you mean tank connector, ask the hardware store at your place..
Sir, ano tawag sa endcap na Yan? Wala kasi akong makita dito sa amin na ganyan plain Lang
Whats the protocol for water circulation
Thank you very much for sharing , this video very helpfull for beginner
Welcome
Is it very necessary to add hard water liquid nutrition (a&b) and pH down solution to this system
yes plants need food.
❤super❤❤❤❤
Will you provide details of the pump? brand name , model, etc? Thanks.
ua-cam.com/video/dLEVQw-bHhc/v-deo.html
check this video I have put the pump details you can use the same
Great tutorial 🙏🏻thankyou😇
Welcome.
Have a 8x12 Greenhouse. Want to go hydroponic. Want to plan a 8x12 U shape system with an inside and outside pvc. Not sure I can do that. Any ideas would help.
Hi, what type/brand of pump do you recommend? I want something solar powered.
i used only electrical powered, you can check this video min 12
ua-cam.com/video/dLEVQw-bHhc/v-deo.html
Nice 😀❤️👍
thank you
Paani continue chalu rakna hai kya?
yung water soluble po ba ano composition
What's that soil like substance you've placed the plantlets in
clay pebbles
Hii, im new to this hydroponic and interested to try. you really made it looks doable :) may I ask what did u use for the decoration (like cotton / rocks) at the end of the video? thanks!
Hi there !
Besides the system you need to get net cups , rockwool ( to germinate the seeds ) ,clay pebbles to make the seedlings stand inside that cup and cover the roots from the light .
Check this video you may like the system design , any question please comment I will answer . thnx
ua-cam.com/video/VK-dpoH5byo/v-deo.html
⁸
Ooof, this stuff is way harder than it looks. Careful so the clay pebbels don't get in the water, cause then the pH goes high n everything turns yellow (using perlite instead is recomendable). Also it is worth mentioning that the pipes get insanely heavy when filled with water, and the water needs to be a certain hight for tiny new things to reach it with their roots. There also need to be a certain angle on the pipes, so the water doesn't build up too much and the shelves (or whatever you use) crash down and break, and I'm not certain about this angle yet, but using PVC to hold up the pipes looks really risky and unstable (especially on only 4 legs like that). Also if you are doing this in an area were you don't wanna spill water, it is worth concidering that the "bucket" needs to be able to hold considerably more amounts of water in order to at some point drain the pipes. The "bucket" should also be covered so no light comes through to the water, as this would cause algeas to grow in it. Having a way to drain the "bucket" easily, might also prove to be handy.
Why is it not possible to do it nice and correctly?
@@DIYGARDENWITHBB Instead of the rockwool cubes can you use Jiffys?
How big of a plant will grow out of each hole? Can I grow some productive Mary Jane in pipe or would I have to convert to a bucket hydro type system?
NFT systems is suitable for lettuce , hurbs , strawberries ...
for protective plants better use bucket system .
you can check my other videos .
What's the name of the thing you put in that bucket?
clay pebbles
could you please expain about the motor used and where should the both ends put and how is the cycle moving, what is the sponge type used in the plant can it be replaced by something else if not available
Hi there , my Water pump I used
38 watt
Max . height 5.2 m
Max .flow 5800 L/h
My water pump got tow outlets , so I link each 2 pipes together water will flow from pipe to another and back to the tank .
If you couldn't find the Sponge ( rockwool ) can replace them with clay pebbles , stone..
What is the name of the water pump that was use and where can i get one to buy
normal submersible water pump.
Nice 👍
Very good. How much can you make in your country?
Hi there this system cost me around 30 USD .
why not connect the two inner PVC pipes and only use one pump hose and one down spout ?
The way he has it aerates the water, no need for a bubbler.
What’s the sizes of holes your drilling into the pipe?
55 mm
How many pumps required for this set
one pump is enough.
❤Thank you❤❤❤❤❤
welcome
Very nice job
Good
Nice 1
Buat meja pun pakai pvc ka 😅
From where i can buy these joints online?
Wow amazing
Fair enough but how do you controll the water level?
just adjust the water pump.
@DIYGARDENWITHBB Was thinking about adding a valve in the back end return to adjust the flow/level.
Your thoughts please?
Nice I make similar and works great..
Hi where I can find those baskets tank you link please
Hi there! check online stores, search for hydroponic pots .
Rock wool and clay pebbles where to buy them? are Lozada and shopee has it?
Hi there !
I buy from shopee .
what's the size of the hole? It seems your drill bit was diy'ed. Care to share? I'll build one for my wife. Very straightforward and very helpful. Thanks! More subs to come!
The hole size is 55 mm , you can check my other videos , got other designs you may like . thank you.
A cada cuanto la circunferencia y al
español...gracias
8T's for stand and 2" spreaders