This has to be the simplest, yet sufficiently in depth video about softwash set ups! It really inspires and encourages to keep on washing! Loving it man. Thank you.
this is just how im setting up... i noticed something.... i noticed the hooks on your horizontal ratchet straps are facing in... might just want to flip them around so they dont wear a hole over time with any heavy bumps. AWESOME SETUP!
Just what im looking for ..thanks for making the vid man! I was gonna do a pickup bed build but i got dirtbikes to ride..lol and my truck is a older 2000 s10 so if it breaks down id be screwed .(knock on wood) How much was that trailer ? If U dont mind..
How does the proportioner work? How do you know where to turn the settings to? I know nothing about this obviously, but I want to learn and start a little pressure washing company on the weekends. I really appreciate your video very informative.
Hey Kurt - Great video, and I've watched a ton of pressure washing videos. I have also been pressure washing for years in PA. My question to you is, how do you dial-back the PSI, if you have a 4CPM/4,000 PSI machine? The most PSI I use is 3,500 to clean concrete. I have a 4,000 machine but avoid using it because the high PSI was blowing out hoses & guns, and applying too much pressure. I do residential and 3,200-3,500 PSI is usually good for most anything. Thanks and good luck to you moving forward.
You can change the PSI on your pressure washer with the unloader, check on UA-cam there's many videos on it, I could also touch base and make a video on it as well
Hey bud I love the set up this video gave me a lot of knowledge on how I'm going to set up my trailer. The only question I have is how do you get the SH or surfactant in the pressure washer? To me it only looks like it's set up for the soft wash. Do you use surfactant or Sh in the pressure washer?
Look nice and compact but I just had one question...Is it not a pain in the ass to un-roll and roll up the hoses when they're recessed into the trailer like that? Maybe some wood underneath to raise them up.
Great video! So you’re running 200ft of high pressure hose? Are you losing any pressure at your wand? I jumped over from 100ft to 200 but I’m losing a good bit of pressure any recommendations?
Do you ever have problems with your proportioner not pulling through evenly? I have this problem with the last 2 I have bought neither working well even though the pump seems to be running fine. Water and soap comes through easy but I have to have chlorine on like 4% before it even comes through
How well does pull water from tank being that is a direct drive,I going to buy that same machine but I was told won’t pull from buffer tank,but I see you have it connect straight to tank ? Thanks
How are you feeding the pressure washer when it's being tank fed? I was told it's impossible if I could send you a picture of my build it is literally the same minus the proportioner
Are you losing power since your pressure cleaner is not belt driven and you have it connected to a tank? I’ve heard you need a belt driven to use a tank
@@kurtspressurewashing and how is your tank giving you the Gpm that you need just like a spigot will? Do you think the float valve is helping you in any type of way? Thanks in advance 🙏🏻👍🏼
@@SharkCityPressureCleaning the pressure washer pulls the needed amount of the water from the tank. Float valve only helps cut the water off when the tank gets full.
Water weighs 8 pounds per gallon, if you have a 100 gallon tank that's 800 pounds of water pushing it through the hose at the bottom into the pressure washer...
@@kurtspressurewashingany chance you could show us how much water the tank is producing gravity feeding your pressure washer and I thought the pressure washer needed to be lower than the tank. Thx
@Kurtspressurewashing Some sufactant comes with color marking dye, when it mixes with SH & water it makes the water look pink or red ext. Trying to find some that's not so expensive.
Watched one of your shorts and you asked if I'd give 10% discount to the idiot that did not want you to use his water to do the job. Being self imployed in the past , I would consider it only to save face and continue to build my buisness. You can bet if he told anyone about your service he also told them about his "discount"...no worries, just as I'm sure you know by now.....verbally have the clients agree to use their water as well as sign the contract when doing any work for them. Be well, it's a good buisness you got going there.
Your drop stick is using PVC IPS threads, but is connecting to a female garden hose thread. You should have used a barb X female IPS threaded fitting. Also your fresh water hose connection is required to be an air gap connection 2X the effective opening from the water source to where it goes into the tank. That valve you are using is in violation of safe water standards and lacks the required design to prevent cross contamination. 😊
Will try to do one in the future, I didn’t know much about UA-cam and making videos while I was building it. Hope it helped just a bit! And hope to see you stick around :)
Quick question, what’s the reason for using 2 filters for your main water tank? One going in from hose which makes sense, and then another coming out into the proportioner? I’m building my own setup and am curious!
Your able to run that 4gpm machine off a buffer tank without a 12v pump? Im hearing unless they are gravity fed or belt driven the pump on a 4gpm machine won't pull from a tank? How did you make that happen?
This has to be the simplest, yet sufficiently in depth video about softwash set ups! It really inspires and encourages to keep on washing!
Loving it man. Thank you.
Appreciate the comment! Thank you!
More Flow More Dough! Love that!
Appreciate it man for sharing , thank you for not trying to sell this for 200, as a super solution for work, it’s popular now. Thank you.
Nice build. I'm going to get a trailer soon.
this is just how im setting up... i noticed something.... i noticed the hooks on your horizontal ratchet straps are facing in... might just want to flip them around so they dont wear a hole over time with any heavy bumps. AWESOME SETUP!
Love your video, super helpful for me, you keep it simple. Tyvm. One question, blue reel, gray hose, what's that one for?
So do all the hose reels and everything all bolt through the aluminum floor all pretty much the same? Just a hole with bolts nuts and washers?
Just what im looking for ..thanks for making the vid man! I was gonna do a pickup bed build but i got dirtbikes to ride..lol and my truck is a older 2000 s10 so if it breaks down id be screwed .(knock on wood)
How much was that trailer ? If U dont mind..
u got nice set bro, keep up the good work, u should do a skid build
This spring I am!
Awesome vid. Would love to see the actual build process from a bare trailer to this
Hopefully one day! If someone wants to buy a trailer build I’ll definitely make a vid
@Kurtspressurewashing can you build this for a truck? Maybe make it on pallets?
Did you think about stacking those hose reels?
That’s my next project! Going to stack them and then get another same one of the hose reels for my high pressure hose and sell the cox reel
How does the proportioner work? How do you know where to turn the settings to? I know nothing about this obviously, but I want to learn and start a little pressure washing company on the weekends. I really appreciate your video very informative.
This is exactly what I’m looking for!! Thanks man again!! Appreciate all your in depth videos, it will help us out a lot! Where are you located?
My company is based in minnesota!
Hey Kurt - Great video, and I've watched a ton of pressure washing videos. I have also been pressure washing for years in PA. My question to you is, how do you dial-back the PSI, if you have a 4CPM/4,000 PSI machine? The most PSI I use is 3,500 to clean concrete. I have a 4,000 machine but avoid using it because the high PSI was blowing out hoses & guns, and applying too much pressure. I do residential and 3,200-3,500 PSI is usually good for most anything. Thanks and good luck to you moving forward.
You can change the PSI on your pressure washer with the unloader, check on UA-cam there's many videos on it, I could also touch base and make a video on it as well
How’s is work cranking those hose reels? Looks like a knuckle buster
Hey! awesome videos. Would you be able to link which hose reels you use?
I’m looking for the 5/8 General Pump hose reel and all I see is one that holds 150 feet. Are you sure you’re using 5/8 hose?
Does it matter if you have a 5/8 or 3/4 garden hose?
I’m assuming you get more flow from a 3/4?
do you have a link to the proportioner?
Great build brotha!!! Exactly what I’m planning on going for. Awesome to see it laid out🤙🏼🤞🏼🦾🙏🙏🔥
Of course! im actually selling this rig if you want to buy it off me. dm me on instagram kurtspressurewashing
Nice build
The pressure washer is only gravity fed ?
Hey bud I love the set up this video gave me a lot of knowledge on how I'm going to set up my trailer. The only question I have is how do you get the SH or surfactant in the pressure washer? To me it only looks like it's set up for the soft wash. Do you use surfactant or Sh in the pressure washer?
Downstream injector!
Good videos brother. Keep them coming.
thank you so much!
Putting a second nut underneath tire each bolt will lessen the chances of things shaking loose
Look nice and compact but I just had one question...Is it not a pain in the ass to un-roll and roll up the hoses when they're recessed into the trailer like that? Maybe some wood underneath to raise them up.
Not at all, if they are fully out (250 feet) it takes me maybe a minute to crank them in. The general pump hose reels move fast and smooth
Great video! So you’re running 200ft of high pressure hose? Are you losing any pressure at your wand? I jumped over from 100ft to 200 but I’m losing a good bit of pressure any recommendations?
It doesn’t seem like I’m losing too much! Are you using the same line for both 100 ft?
@@kurtspressurewashing no I have two 100ft hoses connected together
Where is the water manifold/proportioner you mentioned? It’s not in description
Hey Kurt love the setup where did you get your hose reels from, there are no links in the description??
They are general pump hose reels! 18 inch, hope this helps!!
@@kurtspressurewashing I cant seem to find any reliable ones similar to ones you have, where did you buy them?
That metal hook on your strap is going to make a hole in your tank. Id turn them around or bend them so they dont touch the tank.
How many jobs does the 100 gallon tank last for you? Is the 100 gallon tank necessary or more for convenience?
100 gallon tank is good enough? Seems like that thing would empty in under 30min. I’m looking to buy
Trailer may be nearing maximum capacity, 100 gallons is around 830Lb plus all the other items adds up.
How were you able to prime your pressure washer from the water tank ? Could use help I have a similar set up
How do you have 200ft of Yamtic high-pressure hose, I can only find 150ft Max, did you combine 2 hoses?
Do you ever have problems with your proportioner not pulling through evenly? I have this problem with the last 2 I have bought neither working well even though the pump seems to be running fine. Water and soap comes through easy but I have to have chlorine on like 4% before it even comes through
Are your hoses all the same length?
Nice job boss, you should be proud that you could build something from nothing!
Thank you!
How much for the whole setup very nice
Am i missing the link to the pump in description?
How well does pull water from tank being that is a direct drive,I going to buy that same machine but I was told won’t pull from buffer tank,but I see you have it connect straight to tank ?
Thanks
It pulls great!
No need for gravity either on a 4gpm??
do you have a water pump for the water running to your pressure washer?
No, it is just connected to my pressure washer
Do you have a downflow injector hooked up to the pressure washer? Also is your regulator hooked up to both the pressure washer and the soft wash
If you get a chance can you do an itemized list? What sizes hoses do you think work best? 5/8? And for high pressure what size? Is that ID or OD size?
Check the description I put links to all the stuff!
How are you feeding the pressure washer when it's being tank fed? I was told it's impossible if I could send you a picture of my build it is literally the same minus the proportioner
dm a picture of it on instagram to @puttclick
@Kurtspressurewashing ain't nothing popping up its a bunch of golf videos
Keep the lid off the tank and run the pressure washer. The machine will pull the water through itself
Are you losing power since your pressure cleaner is not belt driven and you have it connected to a tank? I’ve heard you need a belt driven to use a tank
Not at all! I got all the power I need, I fixed it to where it is basically just a garden hose going into the pressure washer.
@@kurtspressurewashing and how is your tank giving you the Gpm that you need just like a spigot will? Do you think the float valve is helping you in any type of way? Thanks in advance 🙏🏻👍🏼
@@SharkCityPressureCleaning the pressure washer pulls the needed amount of the water from the tank. Float valve only helps cut the water off when the tank gets full.
Water weighs 8 pounds per gallon, if you have a 100 gallon tank that's 800 pounds of water pushing it through the hose at the bottom into the pressure washer...
Do you not use a downstream injector?
Did not see that set up anywhere?
I do, I only put it on when I need it though! For house washing
I appreciate your video. Thank you! Do you have a like a drawing/diaghram?
I do not unfortunately, just did all the dimensions myself
Is that washer a belt drive? I've been getting pieces for a new trailer build and I can't decide between a regular machine and belt driven
Nope just a regular!
@@kurtspressurewashing that's interesting. I was always told gear drive won't pull water
better explanation needed of where and how each hose is connected. Vague on the second flexzilla hose connection.
Check my other video on my channel!
You want him to come over to your house and build it for you?
Awesome video. Love the content 👊🏻
Thank you Justin! Appreciate the comment
Can you link your hose filter
How do you pull the water from the buffer tank ?
@@haydenpickens6956 it’s a direct drive so it pulls with gravity
@@kurtspressurewashingany chance you could show us how much water the tank is producing gravity feeding your pressure washer and I thought the pressure washer needed to be lower than the tank. Thx
Hey there what battery is that specifically? Mine is trash and just went out
How much does it cost to build something like this
What size / brand filters are those ?
very nice
Hey bro you forgot to include links for the hose reels and proportioner
Sorry about that! I will update soon, but they are general pump hose reels and proportioner is from cigar city softwash
Where did you get all your hose and hose reels from?
Check description!
Where is the proportioner from?
Where’s your trailer from?
Hello, how are you? Do you configure the entire team to hire you?
Is that color marking dye?
could you elaborate more on this
@Kurtspressurewashing Some sufactant comes with color marking dye, when it mixes with SH & water it makes the water look pink or red ext. Trying to find some that's not so expensive.
ohhh, no it is not @@Justin-ux2ir
where did you get the proportioner?
Cigar city Softwash!!
if you build yoir own you save about 150 bucks
Your filter near the top of your tank is upside down. Won't be able to collect sediment
What size is your trailer?
5x8
Where u get ur water tank from??
Amazon!
I put a link in the description
Not sure how I feel about putting your pump next to your battery.
Why’s that??
It’s totally fine, it’s impossible for them to touch anyways
Did you build the proportioner or buy it?
How do tou determine the percentage of bleach, water and surfactant to go through your proportioner?
Watched one of your shorts and you asked if I'd give 10% discount to the idiot that did not want you to use his water to do the job. Being self imployed in the past , I would consider it only to save face and continue to build my buisness. You can bet if he told anyone about your service he also told them about his "discount"...no worries, just as I'm sure you know by now.....verbally have the clients agree to use their water as well as sign the contract when doing any work for them. Be well, it's a good buisness you got going there.
❤❤
Your drop stick is using PVC IPS threads, but is connecting to a female garden hose thread. You should have used a barb X female IPS threaded fitting. Also your fresh water hose connection is required to be an air gap connection 2X the effective opening from the water source to where it goes into the tank. That valve you are using is in violation of safe water standards and lacks the required design to prevent cross contamination. 😊
Would love see it built from scratch hate these types of vids
Will try to do one in the future, I didn’t know much about UA-cam and making videos while I was building it. Hope it helped just a bit! And hope to see you stick around :)
@@kurtspressurewashing you don't owe this person anything. You figured it out and they should too
@@kurtspressurewashingthat kids a total whiner a guy like this is never going to get it done anyways thanks for the cool breakdown 👍
How much water could this possibly be? You did the right thing. Too weird…I wouldn’t go back.
He felt like a jerk and lied to you 😂
How’s business? You making Bank?
Yessir, super busy it’s insane. Shoot me a email! It’s in my bio
ummmm
umm
ummmmmmmm
Dng
Awesome video and channel. Sent you a message on IG!
How’s is work cranking those hose reels? Looks like a knuckle buster
Quick question, what’s the reason for using 2 filters for your main water tank? One going in from hose which makes sense, and then another coming out into the proportioner? I’m building my own setup and am curious!
You’re right, I later realized it was unnecessary and took it away!
Your able to run that 4gpm machine off a buffer tank without a 12v pump? Im hearing unless they are gravity fed or belt driven the pump on a 4gpm machine won't pull from a tank? How did you make that happen?
how do you have 200ft high pressure hose Yamatic, I can only find 150ft Max, did you combine 2 hoses?
Yes I did