AWESOME! My dealership was going to charge me $154 to program my key fob that I purchased from them! I did it myself, a lady of 65 years! Thanks so much!!
I dive a 2017 Impala. Chevy wanted over $300 for the key and programming. I spent a $30 on a new key and 30 minutes in my car programming it myself. Thank you for this video. You saved me a ton of money.
It worked for me the first time! in a 2015 chevrolet sonic hatchback LT , 08/01/2024 I bought a key on Amazon (it was not the same model, this one had more buttons than the original), I followed the steps just as it says in the video and it worked! I clarify that I only had to change the new controller board for the previous one that I had that didn't work, since the key on the new control didn't work, it stuck. Thank you!
Great video! Thank you very much. I just executed step by step your instructions and it worked perfectly. It's really 10:02 minutes when the security lights turns off. The only trick I had to add to this procedure is that I only had 1 key (since I bought the car at a discounted dealership 😉) so what I had to do was to leave the key loose so I could startle car with the old and programmed fob, then take the key out and put it back in with the new fob in order to start the 30 minute program procedure.. and it worked perfectly the first time. I really appreciate videos like this one and people trying to help out others. Many thanks!
Thanks!!..It worked on my new fob. I demolished my original fob and plus the theft horn alarm was still engaged, the horn going off after each step was annoying, but worth it...
Not sure what happened on my Sonic. Did the procedure, and the key is already working, it starts the car and all buttons on remote work, but the lock light is still on. Should I repeat the procedure?
I did the same I saw in this video at the third time it flashes and waited a couple socond ignition off and on but still the security key light on can't disappear
I have a question. So my key fob chip doesn’t work, I ordered a replacement from Amazon and attached original cut key to the new fob. How do I get it to program?
so if u buy a new smart key can u program the key to the car without doing generating key using the vvdi mini...plz this is were am stock i dont know why the key generation is important for the remote flip key n smart key
are they all the same or are the number of buttons the difference. mine the buttons don't work but it will start the car but I bought one that looks the same but has one more button.
I did the same I saw in this video at the third time it flashes and waited a couple socond ignition off and on but still the security key light ON can't disappear I DID TWO TIMES 30 MINUTES IN TOTAL 1 HOUR BUT NOTHING CHANGE MY CAR IS 2013 GMC TERRAIN SLE 2.4 L FLEX
Everybody to know programing about this key 1st is 1st the key you need to program it must be not programed before with any GM cars it have to be cleared. I was trying to program in my car gmc terrain a programed with another GM cars can't program with my car therefore as i said make sure it is cleared or not programed with other vehicle that's all.
Hello, I used the same method to Programme my new extra key but it's just starting the car only no locking or unlocking or trunk opening is working with new key. I have original key which is 315mhz and replacement key is 433mhz is this could be the reason? If so then what's a solution for 433mhz new key to do locking and locking? Also want to mention the new key was not cutted I went to lock Smith for cutting.
Hello and thank you for your comment. I believe that you are talking about Smart Key. If you do then I have a video on my website that will explain exactly step-by-step how to program that kind of key. The website is www.locksmithvideosonline.com
The lock light isnt going off But now i have power, can shut my windows, the RPM move and i hear the engine turning.......... I also have new battery and engine is perfect.... BUT IT WONT START
Thank you for your kind comment. For more videos & tutorials like this please visit my website: Www.locksmithvideosonline.com There, you could find more then 400+ Professional videos and tutorials like this. And you will have access to all of my 15+ years locksmith knowledge Thank you again got your kind comment ❤️
Hola , tengo una duda amigo!. Vi que pudo encender el carro. También sirve la llave del nuevo control? o tendría que instalar mi llave antigua al nuevo control para poder programar el nuevo control? Saludos
Great video unfortunately it does not work for cars sold in Canada as stated in the manual! I have no idea why they do it that way but thanks for the video anyway
Thank you for your comment. To get the key blade cut, you will have to go to A Locksmith store or to the dealership. After that, you will be able to do the onboard programming. I hope it helps. Thank you again for your comment.
@@Louisianasfinestshay a lot of cars have a super simple process most you can google. But my key cutter cut it and cause he was a nice guy programmed it (and showed me) for free. Ridiculously easy.
I turned the radio/dash console completely off, and turned the auto light feature to off. Throughout this process I monitored the battery voltage, and it never dropped below 12.3v. I hope this helps.
AWESOME! My dealership was going to charge me $154 to program my key fob that I purchased from them! I did it myself, a lady of 65 years! Thanks so much!!
Did you have to cut it? or to bought the cutted 0nes coz that's the one am planning to buy
@@brotherdekakaIts easier to use your already cut key & swap it out with the new one!
That’s awesome
I dive a 2017 Impala. Chevy wanted over $300 for the key and programming. I spent a $30 on a new key and 30 minutes in my car programming it myself. Thank you for this video. You saved me a ton of money.
It worked for me the first time! in a 2015 chevrolet sonic hatchback LT , 08/01/2024
I bought a key on Amazon (it was not the same model, this one had more buttons than the original), I followed the steps just as it says in the video and it worked!
I clarify that I only had to change the new controller board for the previous one that I had that didn't work, since the key on the new control didn't work, it stuck.
Thank you!
man u are my mentor you are the best auto locksmith in youtube
This really works!!! My son and I watched this video and then programmed his new key for his Chevy Sonic LTZ.😊❤
Omgggggg Thank you so much for this video. A locksmith was trying to charge $175 to program my key but I did it myself for $13 thanks to this video
This worked great on my 2020 Sonic! I was doubtful at first because I tried other methods. Thank you!
Great video! Thank you very much. I just executed step by step your instructions and it worked perfectly. It's really 10:02 minutes when the security lights turns off. The only trick I had to add to this procedure is that I only had 1 key (since I bought the car at a discounted dealership 😉) so what I had to do was to leave the key loose so I could startle car with the old and programmed fob, then take the key out and put it back in with the new fob in order to start the 30 minute program procedure.. and it worked perfectly the first time. I really appreciate videos like this one and people trying to help out others. Many thanks!
Did you have to charge your battery at all
@@johnbucaria2859 No, I did not!
OMG 😍🤩🤯🥳 YOU ARE MY SAVER!!! I JUST TRIED IT AND IT WORKED!!! WOW THANK YOU SO MUCH, ONE I WILL BUY YOU LUNCH MY BROTHER 🙏🙏🙏🙏
Thanks Bud it worked for my 2017 Chevy impala saved me hella money that I didn’t want to give chevy!
Thank you! My fob just arrived today and getting the cut tomorrow and programming. Your video is amazing. New follower.☺️
Where we can cut the fob?
Thanks!!..It worked on my new fob. I demolished my original fob and plus the theft horn alarm was still engaged, the horn going off after each step was annoying, but worth it...
IT WORKED! Thank you very much!....Remember People that this is a video to Program a new key fob from the start..
Proglammış bir anahtarım var o silinir mi
just did it on 2013 gmc terrain and worked like a charm
What if you have push button ignition?
You have to take out the ignition
Hi good day. I tried but in my case security light is blinking/flashing in yellow color, not in steady/solid state; how to solve it? Please guide me.
Thank you for this video! It worked for me.
Any suggestions if the light did not go off?
same here, my key works and the buttons work as well, but the light is still on.
Not sure what happened on my Sonic. Did the procedure, and the key is already working, it starts the car and all buttons on remote work, but the lock light is still on. Should I repeat the procedure?
Thanks man , save my day
I did the same I saw in this video at the third time it flashes and waited a couple socond ignition off and on but still the security key light on can't disappear
I had the same issue 😢
I thank you kindly..chevy wanted a ton of money...Amazon key fob. $18..Blank cut $37 lock smith.🎉🎉🎉🎉
Thank you but i have original key and i pay 2 keys what is the best way to do it without programming device??
The best! Wish me luck. Will try now. But thanks in advance.
Awesome instructions
Thank you very much sir.. you helped me out alot keep the videos going.. 😇🥰
I have a question. So my key fob chip doesn’t work, I ordered a replacement from Amazon and attached original cut key to the new fob. How do I get it to program?
I have one working key and one that is not working but used to. If I do this procedure will it erase the working key?
This is for a new key, without a working/original key?
Will this work for a 2014 Chevy impala LT?
This video is really good! Thank you! 👍🏻
Unfortunately my chevy's security lock won't disappear after 10 mins or even after 15 or 20 mins. Any thoughts on it?
so if u buy a new smart key can u program the key to the car without doing generating key using the vvdi mini...plz this is were am stock i dont know why the key generation is important for the remote flip key n smart key
What happens if my key is programmed (car starts, key fob locks and unlocks) but the car lock light doesn’t disappear.
Thanks for your information by any chance do you know how to restart the remote control to a push start Buick LaCrosse
I tried this procedure with a brand new blank key and it activated the service theft deterrent system, what could have been the problem?
I've just tried this, but the security light just flashes. Is something wrong with the key?
I would have liked or you to haved checked to see if the remote start worked after programming the new key
My old key broke if all that was left was the blade, will it be that if I buy a new control the coding will work in the same way?
Will this also work for a 2015 Chevy Bolt? Where is the best place to get the key and fob needed for the replacement?
Where can you buy a remote with blank chip? Can I do this with my key that is already programmed but for some reasons won't start my car?
Thank you boss I try same procedure the car start but the remote is not working.
ขอบคุณ ฉันกำลังต้องการทำกุญแจเพิ่ม
It must be with a new key or a used key can be used?
How to program keyless fob ? If I have master key for Buick encore go 2021 ?
are they all the same or are the number of buttons the difference. mine the buttons don't work but it will start the car but I bought one that looks the same but has one more button.
Thanks a lot it worked!!
Key was cut and worked, but the security light went out right after turning the ignition to the on area, but not starting the motor. Any suggestions?
Can you provide the part number of the key you using so I can the Same one you got please thanks
I did the same I saw in this video at the third time it flashes and waited a couple socond ignition off and on but still the security key light ON can't disappear I DID TWO TIMES 30 MINUTES IN TOTAL 1 HOUR BUT NOTHING CHANGE MY CAR IS 2013 GMC TERRAIN SLE 2.4 L FLEX
보안등이 깜박이는 경우엔 어떻게 해야 합니까?
I have a 2018 but all other videos for 2018s are for push button starts. I’m honestly about to give up hope.
Everybody to know programing about this key 1st is 1st the key you need to program it must be not programed before with any GM cars it have to be cleared. I was trying to program in my car gmc terrain a programed with another GM cars can't program with my car therefore as i said make sure it is cleared or not programed with other vehicle that's all.
how about Chev spin 2009?
Hello, I used the same method to Programme my new extra key but it's just starting the car only no locking or unlocking or trunk opening is working with new key. I have original key which is 315mhz and replacement key is 433mhz is this could be the reason? If so then what's a solution for 433mhz new key to do locking and locking? Also want to mention the new key was not cutted I went to lock Smith for cutting.
the frequency is how the key talks to the car. If the frequency doesn't match, the key won't open the car.
What if your car is a push start ignition
I have a 2011 gmc. Door locks work on fob, but no start
Do you have to use the existing working key before programming the new key?
What if your existing key fob does not have the blade in it (2015 models)?
Hello and thank you for your comment.
I believe that you are talking about Smart Key.
If you do then I have a video on my website that will explain exactly step-by-step how to program that kind of key.
The website is www.locksmithvideosonline.com
Can someone tell me why it didn't work for me? I did every step of the video correctly but the light still appears. Help please
The lock light isnt going off But now i have power, can shut my windows, the RPM move and i hear the engine turning.......... I also have new battery and engine is perfect.... BUT IT WONT START
Para Aveo 2010 es lo mismo?
2018
Does it work on Chevrolet sail 2017
Will it work For cars In the PHILIPINES
Will it work for an old key if i install a new ecu unit , please do reply ... Waiting desperately to know
Same question bro
thanks for the help.your the greatest
Thank you for your kind comment.
For more videos & tutorials like this please visit my website:
Www.locksmithvideosonline.com
There, you could find more then 400+ Professional videos and tutorials like this.
And you will have access to all of my 15+ years locksmith knowledge
Thank you again got your kind comment ❤️
how to copy a fob key i already have into another new key
Hola , tengo una duda amigo!. Vi que pudo encender el carro. También sirve la llave del nuevo control? o tendría que instalar mi llave antigua al nuevo control para poder programar el nuevo control? Saludos
Este metodo borra todas las llaves, tienes que re programar la antigua y la nueva
That's awesome
What if the security light never comes on ?
Each situation may be different.
Depend.
Sorry for Not being able to answer your question in a more specific way
Great video unfortunately it does not work for cars sold in Canada as stated in the manual! I have no idea why they do it that way but thanks for the video anyway
Aplica para Tracker/Trax?
This does not work for buick verano 2014; key will not turn in ignition to begin process, but does unlock the door so it is evidently cut correctly.
great!!!
Thank for the video. but confuse me because repet to much
mr 10 minutes
Not sure, but it's not working on my 2013 Chevy Malibu.
Security light won't turn off
My number one is Trunks rage mode
What is the average price for a duplicate remote/flip key?
$154
@@Krayz_fromEastEnd no it’s nog
The lock went off but the buttons don’t work
it means your new remote is not using the correct frequency. Sonic is 315MHz and there are remotes with 433MHz. That's why.
Did not work for me on my keyed cruze 2019
Bro you just saved me 120$ fuck Chevy THANK YOU SO MUCH
Nobody ever explains where or how to get the key fob cut.
Thank you for your comment.
To get the key blade cut, you will have to go to A Locksmith store or to the dealership.
After that, you will be able to do the onboard programming.
I hope it helps.
Thank you again for your comment.
only a specialized locksmith can cut car keys.
@@johnspence8141 what if I switch my key from old fob to new fob. How would I program?
@@Louisianasfinestshay a lot of cars have a super simple process most you can google. But my key cutter cut it and cause he was a nice guy programmed it (and showed me) for free. Ridiculously easy.
Hello????? Im frustrated
doesnt work on a 2018 chevy sonic nice try
This drained my battery. What did I do wrong?
I turned the radio/dash console completely off, and turned the auto light feature to off. Throughout this process I monitored the battery voltage, and it never dropped below 12.3v. I hope this helps.
Can this work with a 2013 GMC Terrain
Does this work for any car key ??
Does this work for any Opel cars ??