Exllant work and i have 3 questions l hope you answer me cause l am stuck withe my diy hydraulic press Lenthe for the celinder and piston strok? How many ton (10 or 20 or ??) How many kw for the motor? Thanks for knowledge
@@CallutLathe good morning the proplem that l am stuck with the measuring for the cylinder diametr and the piston diameter and strok lenth for force about ten to twenty ton Also the power motor how many k.w and i have a good hydrulic gear pump(36.5 xv)
the pipes come pre-honed. I do not do any other operations except cleaning into the pipe. you know that there should be no dirt in the hydraulic installation.
@@victorcontreras1492 the type of insert varies according to the quality of chrome steel. but I usually use a stainless steel cutting tip (dnmg 0.4radius)
dude, these parts are standard parts found all over the world.I do not have the necessary machines for the manufacture of a non-standard cylinder. that's why I don't have the opportunity to shoot that video.but if you want to know how it's done, I can teach you.😁
È stato commesso un errore grossolano, il foro e la saldatura del raccordo andrebbero fatti sempre prima della lavorazione e filettatura del cilindro perché se fatta dopo quest'ultima si ovalizza durante la saldatura
mini hydraulic pump making video. it is currently on the air. enjoy the show ❤
ua-cam.com/video/kshaN0dRyRA/v-deo.html
Good work , you can com back to work to. morrow and make more cylynders...👍🏻👍🏻👍🏻👍🏻👍🏻😁
Excellent work 👍❤
Excelente trabajo mi hermano colega saludos y bendiciones desde Monterrey NL México y le mando su like 👍
greetings, colleague. thank you 😌
Very nice. ❤ from Germany
Me ne servono 4 pistoni alti m 1.50
Exllant work and i have 3 questions l hope you answer me cause l am stuck withe my diy hydraulic press
Lenthe for the celinder and piston strok?
How many ton (10 or 20 or ??)
How many kw for the motor?
Thanks for knowledge
Thank you. if you tell me exactly the problem, I can help.🙂
@@CallutLathe good morning
the proplem that l am stuck with the measuring for the cylinder diametr and the piston diameter and strok lenth for force about ten to twenty ton
Also the power motor how many k.w and i have a good hydrulic gear pump(36.5 xv)
So the ID of the tube comes prefinished or did you just not show the boring?
it comes ready-made, pre-honed.
So did the 6mm hole get a fitting welded on after you had assembled the cylinder? Does the O ring not get burned?
in fact, a piece is boiled before assembly. but it's one of the section I forgot to show in the video.
Ok. Thanks
Did you buy the piston? Or you make them?
i usually buy it. I make it special myself when it's not in the measurements I need.
Question... Is there a need for cleaning the inside of the pipe? Is it rough? Or you use it as it is?
the pipes come pre-honed. I do not do any other operations except cleaning into the pipe. you know that there should be no dirt in the hydraulic installation.
@@CallutLathe ok thank you for your response...
Nice 👍👍 stedy rest lathe work
انت رائع عمل متقن وجميل وذا جودة عالية
تحياتي لك
Thank you for your nice comment👋🏼
trabalho top um dia chego lá também - qualidade e conhecimento.
Hope this channel grow ❤❤❤❤
thank you for the well wishes. we're just getting started 👋🏼
Maya always bring good quality machines.
You didn't dress the tube where you put the steady rest.
Do you know how "out of round" the tube is?
Your procedure is missing a few steps.
I recommend watching it carefully without fast-forward. because I'm doing the steps you said in the video.
Aaaah, and the fluid in/out points ... drilled, threaded, welded???
it was welded because there is not much thickness in the pipe.
Qual A Marca Desse Torno Tradozir Portugues?
china made lathe.
Nice job! Pipe is pre honed?
yes, pre-honed pipe.
hi do you use crome steel?
yes, i use chrome steel
What type of saw do you use, that can cut chrome steel?
@@victorcontreras1492 the type of insert varies according to the quality of chrome steel. but I usually use a stainless steel cutting tip (dnmg 0.4radius)
@@victorcontreras1492 if you are going to process a chrome-plated steel, I can recommend a ceramic insert.
@@CallutLathe Hi, thank you for your advice
A big hug from Chile.
Robisz fajne rzeczy. Dawaj dalej.
thanks.thank you very much 👋🏼
@@CallutLathe loo
😊😊😊😊😊😊😊😊😊@@CallutLathe 😊😊
THANK YOU FOR KNOWLEDGE SIR YOU ARE REALLY GREAT THANKS AGAN HERE KRISHNA HARI BOL
Thank you. 🥲
Super 😊😊😊😊😊
thank you. you can subscribe for more videos.👋🏼
عمل جميل جدا
لكن لماذا وضعت الغطاء
Thank you. in order for the chips coming out of the material not to come to the bearing.
Nice video, thanks :)
Thanks for watching 🫶🏼
Tôi rất thích sáng chế của bạn
I'm glad you like it.
Thanks for your help
I'm Long time working in Japan CNC machine
Without grinding without honing 😮
tube is already honed
Ecelentes Mestres Nas Uzinajens de Pesas
cylinder in side without polish cant work
the cylinder is currently actively working.I also make custom size cylinder manufacturing.
This is great!. subbed here.
thanks for your subs. welcome 👋🏼❤
Very good
Thank you 🤗
GDC made in turkey a class
Yes it is 😅
Beleza muito bom 👍👍😎😎
thank you. you can subscribe for more videos.👋🏼
Never grip a cylinder in a parallel vice.
hey, this pipe is pretty thick. vice does not hurt.
Big like
thank you. big heart❤
Good work
thank you. you can subscribe for more videos🙂
👍👏
ကန၃္မုာ္ခြါဖိ🎉🎉
Good to me
I'm glad
No hay mucho mérito no hizo lo más difícil pistón y tapa con sus ajustes etc
i also have videos of custom cylinder manufacturing with a diameter of 320 on tiktok.👋🏼👋🏼
🙂
Prezzo
REALLY??? You BOUGHT the parts everyone wants to know how to make and made this tease video??? BLOCKING your channel....
dude, these parts are standard parts found all over the world.I do not have the necessary machines for the manufacture of a non-standard cylinder. that's why I don't have the opportunity to shoot that video.but if you want to know how it's done, I can teach you.😁
Шаг 2
Coming soon. Maybe tomorrow 🙂
М69 no. M68x1x1.5. yes.
Matep
G0
⁸⁰
an awful lot of mistakes
for example?
@@CallutLathe Pretty loose fitting threads, but if it stays on, 👍
9
È stato commesso un errore grossolano, il foro e la saldatura del raccordo andrebbero fatti sempre prima della lavorazione e filettatura del cilindro perché se fatta dopo quest'ultima si ovalizza durante la saldatura
there's no need to worry. this weld was used for the video. we do tig welding under normal circumstances.
and what you say is true. it is more correct to perform the threading process after welding.
👍👏